linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andres Salomon <dilinger@queued.net>
To: adaplas@gmail.com
Cc: linux-fbdev-devel@lists.sourceforge.net,
	linux-kernel@vger.kernel.org, info-linux@geode.amd.com,
	Andrew@sc8-sf-spam2.sourceforge.net,
	Jordan Crouse <jordan.crouse@amd.com>,
	Morton <akpm@linux-foundation.org>
Subject: [PATCH 3/6] gxfb: move MSR bit fields into gxfb.h
Date: Sat, 8 Mar 2008 20:48:40 -0500	[thread overview]
Message-ID: <20080308204840.47a27236@ephemeral> (raw)

From bee7242cf04c4a060b311b11985efb495f308355 Mon Sep 17 00:00:00 2001
From: Andres Salomon <dilinger@debian.org>
Date: Mon, 25 Feb 2008 15:29:36 -0500
Subject: [PATCH] gxfb: move MSR bit fields into gxfb.h

This continues the gxfb header cleanups.  MSRs are defined in geode.h;
the specific bits we care about are defined in gxfb.h.

Signed-off-by: Andres Salomon <dilinger@debian.org>
---
 drivers/video/geode/display_gx.h |    3 ---
 drivers/video/geode/gxfb.h       |   16 ++++++++++++++++
 drivers/video/geode/gxfb_core.c  |    2 +-
 drivers/video/geode/video_gx.c   |    4 ++--
 drivers/video/geode/video_gx.h   |   14 --------------
 5 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
index 56e9d2e..ad556d3 100644
--- a/drivers/video/geode/display_gx.h
+++ b/drivers/video/geode/display_gx.h
@@ -16,7 +16,4 @@ int gx_line_delta(int xres, int bpp);
 
 extern struct geode_dc_ops gx_dc_ops;
 
-/* MSR that tells us if a TFT or CRT is attached */
-#define GLD_MSR_CONFIG_DM_FP 0x40
-
 #endif /* !__DISPLAY_GX1_H__ */
diff --git a/drivers/video/geode/gxfb.h b/drivers/video/geode/gxfb.h
index 3367fdc..19cf8ca 100644
--- a/drivers/video/geode/gxfb.h
+++ b/drivers/video/geode/gxfb.h
@@ -231,4 +231,20 @@ enum fp_registers {
 #define write_fp(reg, val)	writel((uint32_t) (val), \
 					par->vid_regs + 8*(reg) + VP_FP_START)
 
+
+/* MSRs are defined in asm/geode.h; their bitfields are here */
+
+#define MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3	(1 << 3)
+#define MSR_GLCP_SYS_RSTPLL_DOTPREMULT2	(1 << 2)
+#define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2	(1 << 1)
+
+#define MSR_GLCP_DOTPLL_LOCK		(1 << 25)	/* r/o */
+#define MSR_GLCP_DOTPLL_BYPASS		(1 << 15)
+#define MSR_GLCP_DOTPLL_DOTRESET	(1 << 0)
+
+#define MSR_GX_MSR_PADSEL_MASK		0x3FFFFFFF	/* undocumented? */
+#define MSR_GX_MSR_PADSEL_TFT		0x1FFFFFFF	/* undocumented? */
+
+#define MSR_GX_GLD_MSR_CONFIG_FP	(1 << 3)
+
 #endif
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 2e49a5e..ee25774 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -328,7 +328,7 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
 
 	rdmsrl(MSR_GX_GLD_MSR_CONFIG, val);
 
-	if ((val & GLD_MSR_CONFIG_DM_FP) == GLD_MSR_CONFIG_DM_FP)
+	if ((val & MSR_GX_GLD_MSR_CONFIG_FP) == MSR_GX_GLD_MSR_CONFIG_FP)
 		par->enable_crt = 0;
 	else
 		par->enable_crt = 1;
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index 51b03b7..bb77ccc 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -187,8 +187,8 @@ gx_configure_tft(struct fb_info *info)
 	/* Set up the DF pad select MSR */
 
 	rdmsrl(MSR_GX_MSR_PADSEL, val);
-	val &= ~GX_VP_PAD_SELECT_MASK;
-	val |= GX_VP_PAD_SELECT_TFT;
+	val &= ~MSR_GX_MSR_PADSEL_MASK;
+	val |= MSR_GX_MSR_PADSEL_TFT;
 	wrmsrl(MSR_GX_MSR_PADSEL, val);
 
 	/* Turn off the panel */
diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
index 5457bd0..79f6e81 100644
--- a/drivers/video/geode/video_gx.h
+++ b/drivers/video/geode/video_gx.h
@@ -13,18 +13,4 @@
 
 extern struct geode_vid_ops gx_vid_ops;
 
-/* GX Flatpanel control MSR */
-#define GX_VP_PAD_SELECT_MASK          0x3FFFFFFF
-#define GX_VP_PAD_SELECT_TFT           0x1FFFFFFF
-
-/* Geode GX clock control MSRs */
-
-#  define MSR_GLCP_SYS_RSTPLL_DOTPREDIV2	(0x0000000000000002ull)
-#  define MSR_GLCP_SYS_RSTPLL_DOTPREMULT2	(0x0000000000000004ull)
-#  define MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3	(0x0000000000000008ull)
-
-#  define MSR_GLCP_DOTPLL_DOTRESET		(0x0000000000000001ull)
-#  define MSR_GLCP_DOTPLL_BYPASS		(0x0000000000008000ull)
-#  define MSR_GLCP_DOTPLL_LOCK			(0x0000000002000000ull)
-
 #endif /* !__VIDEO_GX_H__ */
-- 
1.5.3.7


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

             reply	other threads:[~2008-03-09  1:45 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-09  1:48 Andres Salomon [this message]
2008-03-10 20:14 ` [PATCH 3/6] gxfb: move MSR bit fields into gxfb.h Andrew Morton
2008-03-10 20:28   ` Andres Salomon
2008-03-10 21:26     ` Andrew Morton
  -- strict thread matches above, loose matches on Subject: below --
2008-03-11 22:14 Andres Salomon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080308204840.47a27236@ephemeral \
    --to=dilinger@queued.net \
    --cc=Andrew@sc8-sf-spam2.sourceforge.net \
    --cc=adaplas@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=info-linux@geode.amd.com \
    --cc=jordan.crouse@amd.com \
    --cc=linux-fbdev-devel@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).