* [Linux-fbdev-devel] [PATCH 1/9] viafb: VIA Frame Buffer Device Driver
[not found] <C80EF34A3D2E494DBAF9AC29C7AE4EB806F67705@exchtp03.taipei.via.com.tw>
@ 2008-05-07 10:55 ` JosephChan
2008-05-07 11:16 ` Pekka Enberg
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: JosephChan @ 2008-05-07 10:55 UTC (permalink / raw)
To: JosephChan, akpm, geert; +Cc: linux-fbdev-devel, linux-kernel
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
diff -Nur a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt
--- a/Documentation/fb/viafb.txt 1969-12-31 19:00:00.000000000
-0500
+++ b/Documentation/fb/viafb.txt 2008-05-06 06:46:26.000000000
-0400
@@ -0,0 +1,197 @@
+
+ VIA Integration Graphic Chip Console Framebuffer Driver
+
+[Platform]
+-----------------------
+ The console framebuffer driver is for Graphics chips of
+ VIA UniChrome (Pro) Family:
+ CLE266, PM800 / CN400,P4M800CE / P4M800Pro / CN700 / VN800,
+ CX700 / VX700, P4M890
+ VIA Chrome9 Family:
+ K8M890, CN896 / P4M900, VX800)
+
+[Driver features]
+------------------------
+ Device:CRT, LCD, DVI
+
+ Support Mode:
+ CRT:
+ 640 x480(60, 75, 85, 100, 120 Hz), 720 x480(60 Hz),
+ 720 x576(60 Hz), 800 x600(60, 75, 85, 100, 120 Hz),
+ 848 x480(60 Hz), 856 x480(60 Hz), 1024 x512(60 Hz),
+ 1024 x768(60, 75, 85, 100 Hz), 1152 x864(75 Hz),
+ 1280 x768(60 Hz), 1280 x960(60 Hz), 1280 x1024(60, 75, 85
Hz),
+ 1440 x1050(60 Hz), 1600 x1200(60, 75 Hz), 1280 x720(60 Hz),
+ 1920 x1080(60 Hz), 1400 x1050(60 Hz), 800 x480(60 Hz)
+
+ color depth:8 bpp, 16 bpp, 32 bpp
+
+ Support 2 D hardware accelerator for kernel 2.6.xx
+
+[Using the viafb module]
+-- -- --------------------
+ Start viafb with default settings,
+ #modprobe viafb
+
+ Start viafb with with user options,
+ #modprobe viafb mode=800x600 via_fb_bpp=16 refresh=60
+ active_dev=CRT+DVI dvi_port = DVP1 mode1 = 1024 x768
+ via_fb_bpp1 = 16 refresh1 = 60 SAMM_ON = 1
+
+ mode:
+ 640 x480(default)
+ 720 x480
+ 800 x600
+ 1024 x768
+ ......
+
+ via_fb_bpp:
+ 8, 16, 32(default:32)
+
+ refresh:
+ 60, 75, 85, 100, 120(default:60)
+
+ lcd_dsp_method:
+ 0 : expandsion(default)
+ 1 : centering
+
+ lcd_mode:
+ 0 : OPEN LDI(default)
+ 1 : SPWG
+
+ lcd_panel_id:
+ 0 : Resolution: 640 x480, Channel: single, Dithering: Enable
+ 1 : Resolution: 800 x600, Channel: single, Dithering: Enable
+ 2 : Resolution: 1024 x768, Channel: single, Dithering:Enable
(default)
+ 3 : Resolution: 1280 x768, Channel: single, Dithering: Enable
+ 4 : Resolution: 1280 x1024, Channel: dual, Dithering: Enable
+ 5 : Resolution: 1400 x1050, Channel: dual, Dithering: Enable
+ 6 : Resolution: 1600 x1200, Channel: dual, Dithering: Enable
+
+ 8 : Resolution: 800 x480, Channel: single, Dithering: Enable
+ 9 : Resolution: 1024 x768, Channel: dual, Dithering: Enable
+ 10: Resolution: 1024 x768, Channel: single, Dithering: Disable
+ 11: Resolution: 1024 x768, Channel: dual, Dithering: Disable
+ 12: Resolution: 1280 x768, Channel: single, Dithering: Disable
+ 13: Resolution: 1280 x1024, Channel: dual, Dithering: Disable
+ 14: Resolution: 1400 x1050, Channel: dual, Dithering: Disable
+ 15: Resolution: 1600 x1200, Channel: dual, Dithering: Disable
+ 16: Resolution: 1366 x768, Channel: single, Dithering: Disable
+ 17: Resolution: 1024 x600, Channel: single, Dithering: Enable
+ 18: Resolution: 1280 x768, Channel: dual, Dithering: Enable
+ 19: Resolution: 1280 x800, Channel: single, Dithering: Enable
+
+ via_fb_accel:
+ 0 : No 2 D Hardware Acceleration(default)
+ 1 : 2 D Hardware Acceleration
+
+ SAMM_ON:
+ 0 : SAMM_ON disable(default)
+ 1 : SAMM_ON enable
+
+ mode1:(secondary display device)
+ 640 x480(default)
+ 720 x480
+ 800 x600
+ 1024 x768
+ ... ...
+
+ via_fb_bpp1:(secondary display device)
+ 8, 16, 32(default:32)
+
+ refresh1:(secondary display device)
+ 60, 75, 85, 100, 120(default:60)
+
+ active_dev:
+ This option is used to specify active devices.(CRT, DVI, LCD,
CRT + LCD, CRT + DVI,...)
+ DVI stand for DVI or HDMI, Ex.If you want to enable HDMI, set
active_dev = DVI
+ In SAMM case, the previous of active_dev is primary device, and
the following is secondary device.
+
+ For example:
+ To enable one device, such as DVI only, we should use:
+ modprobe viafb active_dev = DVI...To enable two devices, such
as CRT + DVI:
+
+ For DuoView case, we can use:
+ modprobe viafb active_dev = CRT + DVI...OR modprobe viafb
active_dev = DVI + CRT...
+
+ For SAMM case:
+ If CRT is primary and DVI is secondary, we should use:
+ modprobe viafb active_dev = CRT + DVI SAMM_ON = 1...
+ If DVI is primary and CRT is secondary, we should use:
+ modprobe viafb active_dev = DVI + CRT SAMM_ON = 1...
+
+ display_hardware_layout:
+ This option is uesed to specify display hardware layout
for CX700 chip.
+ 1 : LCD only
+ 2 : DVI only
+ 3 : LCD + DVI(default)
+ 4 : LCD1 + LCD2(internal + internal)
+ 16: LCD1 + ExternalLCD2(internal + external)
+
+ second_size:
+ This option is used to set second device memory size(MB) in
SAMM case.
+ The minimal size is 16.
+
+ EPIA_DVI:
+ This option is used to enable DVI on EPIA - M
+ 0 : No DVI on EPIA - M(default)
+ 1 : DVI on EPIA - M
+
+ BusWidth:
+ When using 24 - Bit Bus Width Digital Interface, this option
should be set.
+ 12: 12-Bit LVDS or 12-Bit TMDS(default)
+ 24: 24-Bit LVDS or 24-Bit TMDS
+
+ LCDDualEdge:
+ When using Dual Edge Panel, this option should be set.
+ 0 : No Dual Edge Panel(default)
+ 1 : Dual Edge Panel
+
+ video_dev:
+ This option is used to specify video output devices(CRT, DVI,
LCD) for duoview case.
+ For example:
+ To output video on DVI, we should use:
+ modprobe viafb video_dev = DVI...
+
+ lcd_port:
+ This option is used to specify lcd output port,
+ available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH"
+ "DFP_LOW", for external LCD + external DVI on
CX700(External LCD is on DVP0),
+ we should use:
+ modprobe viafb lcd_port = DVP0...
+
+Note:
+ 1. CRT may not display properly for DuoView CRT & DVI display at
+ the "640x480" PAL mode with DVI overscan enabled.
+ 2. When SAMM is enable, mode and mode1, via_fb_bpp and via_fb_bpp1,
+ refresh and refresh1 can be different.
+ 3. When console is depend on viafbinfo1, dynamically change
resolution and bpp,
+ need call VIAFB specified ioctl interface VIAFB_SET_DEVICE.
+ Call common ioctl function FBIOPUT_VSCREENINFO will cause sreen
crush.
+
+[Configure viafb with "fbset" tool]
+-----------------------------------
+ "fbset" is an inbox utility of Linux.
+ 1. Inquire current viafb information, type,
+ # fbset -i
+
+ 2. Set various resolutions and refresh rates,
+ # fbset <resolution-vertical_sync>
+
+ example,
+ # fbset "1024x768-75"
+ or
+ # fbset -g 1024 768 1024 768 32
+ Check the file "/etc/fb.modes" to find display modes available.
+
+ 3. Set the color depth,
+ # fbset -depth <value>
+
+ example,
+ # fbset -depth 16
+
+[Bootup with viafb]:
+--------------------
+ Add the following line to your lilo.conf:
+ append = "video=viafb:mode:1024x768,via_fb_bpp:32,refresh:85"
+
diff -Nur a/drivers/video/Kconfig b/drivers/video/Kconfig
--- a/drivers/video/Kconfig 2008-05-06 07:05:59.000000000 -0400
+++ b/drivers/video/Kconfig 2008-05-06 07:06:37.000000000 -0400
@@ -1501,6 +1501,24 @@
(315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as
well
as XGI V3XT, V5, V8 and Z7.
+config FB_VIA
+ tristate "VIA UniChrome (Pro) and Chrome9 display support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for Graphics chips of
VIA
+ UniChrome (Pro) Family
(CLE266,PM800/CN400,P4M800CE/P4M800Pro/
+ CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family
(K8M890,CN896
+ /P4M900,VX800)
+
+ Say Y if you have a VIA UniChrome graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called viafb.
+
config FB_NEOMAGIC
tristate "NeoMagic display support"
depends on FB && PCI
diff -Nur a/drivers/video/Makefile b/drivers/video/Makefile
--- a/drivers/video/Makefile 2008-05-06 07:05:49.000000000 -0400
+++ b/drivers/video/Makefile 2008-05-06 07:06:44.000000000 -0400
@@ -43,6 +43,7 @@
obj-$(CONFIG_FB_ATY128) += aty/ macmodes.o
obj-$(CONFIG_FB_RADEON) += aty/
obj-$(CONFIG_FB_SIS) += sis/
+obj-$(CONFIG_FB_VIA) += via/
obj-$(CONFIG_FB_KYRO) += kyro/
obj-$(CONFIG_FB_SAVAGE) += savage/
obj-$(CONFIG_FB_GEODE) += geode/
diff -Nur a/drivers/video/via/accel.c b/drivers/video/via/accel.c
--- a/drivers/video/via/accel.c 1969-12-31 19:00:00.000000000 -0500
+++ b/drivers/video/via/accel.c 2008-04-29 02:51:13.000000000 -0400
@@ -0,0 +1,245 @@
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2, or (at your
+ option)
+ * any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include "global.h"
+
+void init_accel(void)
+{
+ parinfo.cursor_start = parinfo.fbmem_free - CURSOR_SIZE;
+ parinfo.fbmem_free -= CURSOR_SIZE;
+ parinfo.fbmem_used += CURSOR_SIZE;
+
+ /* Reverse 8*1024 memory space for cursor image of the XServer
*/
+ parinfo.VQ_start = parinfo.fbmem_free - CURSOR_SIZE - VQ_SIZE;
+ parinfo.VQ_end = parinfo.VQ_start + VQ_SIZE - 1;
+ parinfo.fbmem_free -= (CURSOR_SIZE + VQ_SIZE);
+ parinfo.fbmem_used += (CURSOR_SIZE + VQ_SIZE); }
+
+void init_2d_engine(void)
+{
+ u32 dwVQStartAddr, dwVQEndAddr;
+ u32 dwVQLen, dwVQStartL, dwVQEndL, dwVQStartEndH;
+
+ /* init 2D engine regs to reset 2D engine */
+ MMIO_OUT32(VIA_REG_GEMODE, 0x0);
+ MMIO_OUT32(VIA_REG_SRCPOS, 0x0);
+ MMIO_OUT32(VIA_REG_DSTPOS, 0x0);
+ MMIO_OUT32(VIA_REG_DIMENSION, 0x0);
+ MMIO_OUT32(VIA_REG_PATADDR, 0x0);
+ MMIO_OUT32(VIA_REG_FGCOLOR, 0x0);
+ MMIO_OUT32(VIA_REG_BGCOLOR, 0x0);
+ MMIO_OUT32(VIA_REG_CLIPTL, 0x0);
+ MMIO_OUT32(VIA_REG_CLIPBR, 0x0);
+ MMIO_OUT32(VIA_REG_OFFSET, 0x0);
+ MMIO_OUT32(VIA_REG_KEYCONTROL, 0x0);
+ MMIO_OUT32(VIA_REG_SRCBASE, 0x0);
+ MMIO_OUT32(VIA_REG_DSTBASE, 0x0);
+ MMIO_OUT32(VIA_REG_PITCH, 0x0);
+ MMIO_OUT32(VIA_REG_MONOPAT1, 0x0);
+
+ /* Init AGP and VQ regs */
+ switch (chip_info.gfx_chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ MMIO_OUT32(0x41c, 0x00100000);
+ MMIO_OUT32(0x420, 0x680A0000);
+ MMIO_OUT32(0x420, 0x02000000);
+ break;
+
+ default:
+ MMIO_OUT32(VIA_REG_TRANSET, 0x00100000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x00000000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x00333004);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x60000000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x61000000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x62000000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x63000000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x64000000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x7D000000);
+
+ MMIO_OUT32(VIA_REG_TRANSET, 0xFE020000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x00000000);
+ break;
+ }
+ if (parinfo.VQ_start != 0) {
+ /* Enable VQ */
+ dwVQStartAddr = parinfo.VQ_start;
+ dwVQEndAddr = parinfo.VQ_end;
+ switch (chip_info.gfx_chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ dwVQStartL = 0x70000000 | (dwVQStartAddr &
0xFFFFFF);
+ dwVQEndL = 0x71000000 | (dwVQEndAddr &
0xFFFFFF);
+ dwVQStartEndH =
+ 0x72000000 | ((dwVQStartAddr & 0xFF000000)
>>
+ 24) | ((dwVQEndAddr &
0xFF000000)
+ >> 16);
+ dwVQLen = 0x73000000 | (VQ_SIZE >> 3);
+ break;
+ default:
+ dwVQStartL = 0x50000000 | (dwVQStartAddr &
0xFFFFFF);
+ dwVQEndL = 0x51000000 | (dwVQEndAddr &
0xFFFFFF);
+ dwVQStartEndH =
+ 0x52000000 | ((dwVQStartAddr & 0xFF000000)
>>
+ 24) | ((dwVQEndAddr &
0xFF000000)
+ >> 16);
+ dwVQLen = 0x53000000 | (VQ_SIZE >> 3);
+ break;
+ }
+
+ switch (chip_info.gfx_chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ MMIO_OUT32(0x41c, 0x00100000);
+ MMIO_OUT32(0x420, dwVQStartEndH);
+ MMIO_OUT32(0x420, dwVQStartL);
+ MMIO_OUT32(0x420, dwVQEndL);
+ MMIO_OUT32(0x420, dwVQLen);
+ MMIO_OUT32(0x420, 0x74301001);
+ MMIO_OUT32(0x420, 0x00000000);
+ break;
+ default:
+ MMIO_OUT32(VIA_REG_TRANSET, 0x00FE0000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x080003FE);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x0A00027C);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x0B000260);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x0C000274);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x0D000264);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x0E000000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x0F000020);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x1000027E);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x110002FE);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x200F0060);
+
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x00000006);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x40008C0F);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x44000000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x45080C04);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x46800408);
+
+ MMIO_OUT32(VIA_REG_TRANSPACE, dwVQStartEndH);
+ MMIO_OUT32(VIA_REG_TRANSPACE, dwVQStartL);
+ MMIO_OUT32(VIA_REG_TRANSPACE, dwVQEndL);
+ MMIO_OUT32(VIA_REG_TRANSPACE, dwVQLen);
+ break;
+ }
+ } else {
+ /* Diable VQ */
+ switch (chip_info.gfx_chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ MMIO_OUT32(0x41c, 0x00100000);
+ MMIO_OUT32(0x420, 0x74301000);
+ break;
+ default:
+ MMIO_OUT32(VIA_REG_TRANSET, 0x00FE0000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x00000004);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x40008C0F);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x44000000);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x45080C04);
+ MMIO_OUT32(VIA_REG_TRANSPACE, 0x46800408);
+ break;
+ }
+ }
+
+ set_2d_color_depth(parinfo.bpp);
+
+ MMIO_OUT32(VIA_REG_SRCBASE, 0x0);
+ MMIO_OUT32(VIA_REG_DSTBASE, 0x0);
+
+ MMIO_OUT32(VIA_REG_PITCH,
+ VIA_PITCH_ENABLE |
+ (((parinfo.hres *
+ parinfo.bpp >> 3) >> 3) | (((parinfo.hres *
+ parinfo.
+ bpp >> 3) >> 3) <<
16)));
+}
+
+void set_2d_color_depth(int bpp)
+{
+ u32 dwGEMode;
+
+ dwGEMode = MMIO_IN32(0x04) & 0xFFFFFCFF;
+
+ switch (bpp) {
+ case 16:
+ dwGEMode |= VIA_GEM_16bpp;
+ break;
+ case 32:
+ dwGEMode |= VIA_GEM_32bpp;
+ break;
+ default:
+ dwGEMode |= VIA_GEM_8bpp;
+ break;
+ }
+
+ /* Set BPP and Pitch */
+ MMIO_OUT32(VIA_REG_GEMODE, dwGEMode);
+}
+
+void hw_cursor_init(void)
+{
+ /* Set Cursor Image Base Address */
+ MMIO_OUT32(VIA_REG_CURSOR_MODE, parinfo.cursor_start);
+ MMIO_OUT32(VIA_REG_CURSOR_POS, 0x0);
+ MMIO_OUT32(VIA_REG_CURSOR_ORG, 0x0);
+ MMIO_OUT32(VIA_REG_CURSOR_BG, 0x0);
+ MMIO_OUT32(VIA_REG_CURSOR_FG, 0x0);
+}
+
+void show_hw_cursor(struct fb_info *info, int Status) {
+ u32 temp;
+ u32 iga_path = ((struct viafb_par *)(info->par))->iga_path;
+
+ temp = MMIO_IN32(VIA_REG_CURSOR_MODE);
+ switch (Status) {
+ case HW_Cursor_ON:
+ temp |= 0x1;
+ break;
+ case HW_Cursor_OFF:
+ temp &= 0xFFFFFFFE;
+ break;
+ }
+ switch (iga_path) {
+ case IGA2:
+ temp |= 0x80000000;
+ break;
+ case IGA1:
+ default:
+ temp &= 0x7FFFFFFF;
+ }
+ MMIO_OUT32(VIA_REG_CURSOR_MODE, temp); }
+
+int wait_engine_idle(void)
+{
+ int loop = 0;
+
+ while (!(MMIO_IN32(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY)
+ && (loop++ < MAXLOOP)) ;
+
+ while ((MMIO_IN32(VIA_REG_STATUS) &
+ (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY))
&&
+ (loop++ < MAXLOOP)) ;
+
+ return loop >= MAXLOOP;
+}
diff -Nur a/drivers/video/via/accel.h b/drivers/video/via/accel.h
--- a/drivers/video/via/accel.h 1969-12-31 19:00:00.000000000 -0500
+++ b/drivers/video/via/accel.h 2008-04-29 02:51:14.000000000 -0400
@@ -0,0 +1,190 @@
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2, or (at your
+ option)
+ * any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __ACCEL_H__
+#define __ACCEL_H__
+
+#ifndef FB_ACCEL_VIA_UNICHROME
+#define FB_ACCEL_VIA_UNICHROME 50
+#endif
+
+/* MMIO Base Address Definition */
+#define MMIO_VGABASE 0x8000
+#define MMIO_CR_READ MMIO_VGABASE + 0x3D4
+#define MMIO_CR_WRITE MMIO_VGABASE + 0x3D5
+#define MMIO_SR_READ MMIO_VGABASE + 0x3C4
+#define MMIO_SR_WRITE MMIO_VGABASE + 0x3C5
+
+#ifndef VIA_MMIO
+#define VIA_MMIO 1
+#endif
+
+#if VIA_MMIO
+#define MMIO_OUT8(reg, val) writeb(val, parinfo.io_virt + reg) #define
+MMIO_OUT16(reg, val) writew(val, parinfo.io_virt + reg) #define
+MMIO_OUT32(reg, val) writel(val, parinfo.io_virt + reg)
+#define MMIO_IN8(reg) readb(parinfo.io_virt + reg)
+#define MMIO_IN16(reg) readw(parinfo.io_virt + reg)
+#define MMIO_IN32(reg) readl(parinfo.io_virt + reg)
+
+#else
+#define MMIO_OUT8(reg, val) outb(val, reg) #define MMIO_OUT16(reg,
+val) outw(val, reg) #define MMIO_OUT32(reg, val) outl(val, reg)
+#define MMIO_IN8(reg) inb(reg)
+#define MMIO_IN16(reg) inw(reg)
+#define MMIO_IN32(reg) inl(reg)
+#endif
+
+/* HW Cursor Status Define */
+#define HW_Cursor_ON 0
+#define HW_Cursor_OFF 1
+
+#define CURSOR_SIZE (8 * 1024)
+#define VQ_SIZE (256 * 1024)
+
+#define VIA_MMIO_BLTBASE 0x200000
+#define VIA_MMIO_BLTSIZE 0x200000
+
+/* Defines for 2D registers */
+#define VIA_REG_GECMD 0x000
+#define VIA_REG_GEMODE 0x004
+#define VIA_REG_SRCPOS 0x008
+#define VIA_REG_DSTPOS 0x00C
+/* width and height */
+#define VIA_REG_DIMENSION 0x010
+#define VIA_REG_PATADDR 0x014
+#define VIA_REG_FGCOLOR 0x018
+#define VIA_REG_BGCOLOR 0x01C
+/* top and left of clipping */
+#define VIA_REG_CLIPTL 0x020
+/* bottom and right of clipping */
+#define VIA_REG_CLIPBR 0x024
+#define VIA_REG_OFFSET 0x028
+/* color key control */
+#define VIA_REG_KEYCONTROL 0x02C
+#define VIA_REG_SRCBASE 0x030
+#define VIA_REG_DSTBASE 0x034
+/* pitch of src and dst */
+#define VIA_REG_PITCH 0x038
+#define VIA_REG_MONOPAT0 0x03C
+#define VIA_REG_MONOPAT1 0x040
+/* from 0x100 to 0x1ff */
+#define VIA_REG_COLORPAT 0x100
+
+/* VIA_REG_PITCH(0x38): Pitch Setting */
+#define VIA_PITCH_ENABLE 0x80000000
+
+/* defines for VIA HW cursor registers */
+#define VIA_REG_CURSOR_MODE 0x2D0
+#define VIA_REG_CURSOR_POS 0x2D4
+#define VIA_REG_CURSOR_ORG 0x2D8
+#define VIA_REG_CURSOR_BG 0x2DC
+#define VIA_REG_CURSOR_FG 0x2E0
+
+/* VIA_REG_GEMODE(0x04): GE mode */
+#define VIA_GEM_8bpp 0x00000000
+#define VIA_GEM_16bpp 0x00000100
+#define VIA_GEM_32bpp 0x00000300
+
+/* VIA_REG_GECMD(0x00): 2D Engine Command */
+#define VIA_GEC_NOOP 0x00000000
+#define VIA_GEC_BLT 0x00000001
+#define VIA_GEC_LINE 0x00000005
+
+/* Rotate Command */
+#define VIA_GEC_ROT 0x00000008
+
+#define VIA_GEC_SRC_XY 0x00000000
+#define VIA_GEC_SRC_LINEAR 0x00000010
+#define VIA_GEC_DST_XY 0x00000000
+#define VIA_GEC_DST_LINRAT 0x00000020
+
+#define VIA_GEC_SRC_FB 0x00000000
+#define VIA_GEC_SRC_SYS 0x00000040
+#define VIA_GEC_DST_FB 0x00000000
+#define VIA_GEC_DST_SYS 0x00000080
+
+/* source is mono */
+#define VIA_GEC_SRC_MONO 0x00000100
+/* pattern is mono */
+#define VIA_GEC_PAT_MONO 0x00000200
+/* mono src is opaque */
+#define VIA_GEC_MSRC_OPAQUE 0x00000000
+/* mono src is transparent */
+#define VIA_GEC_MSRC_TRANS 0x00000400
+/* pattern is in frame buffer */
+#define VIA_GEC_PAT_FB 0x00000000
+/* pattern is from reg setting */
+#define VIA_GEC_PAT_REG 0x00000800
+
+#define VIA_GEC_CLIP_DISABLE 0x00000000
+#define VIA_GEC_CLIP_ENABLE 0x00001000
+
+#define VIA_GEC_FIXCOLOR_PAT 0x00002000
+
+#define VIA_GEC_INCX 0x00000000
+#define VIA_GEC_DECY 0x00004000
+#define VIA_GEC_INCY 0x00000000
+#define VIA_GEC_DECX 0x00008000
+/* mono pattern is opaque */
+#define VIA_GEC_MPAT_OPAQUE 0x00000000
+/* mono pattern is transparent */
+#define VIA_GEC_MPAT_TRANS 0x00010000
+
+#define VIA_GEC_MONO_UNPACK 0x00000000
+#define VIA_GEC_MONO_PACK 0x00020000
+#define VIA_GEC_MONO_DWORD 0x00000000
+#define VIA_GEC_MONO_WORD 0x00040000
+#define VIA_GEC_MONO_BYTE 0x00080000
+
+#define VIA_GEC_LASTPIXEL_ON 0x00000000
+#define VIA_GEC_LASTPIXEL_OFF 0x00100000
+#define VIA_GEC_X_MAJOR 0x00000000
+#define VIA_GEC_Y_MAJOR 0x00200000
+#define VIA_GEC_QUICK_START 0x00800000
+
+/* defines for VIA 3D registers */
+#define VIA_REG_STATUS 0x400
+#define VIA_REG_TRANSET 0x43C
+#define VIA_REG_TRANSPACE 0x440
+
+/* VIA_REG_STATUS(0x400): Engine Status */
+
+/* Command Regulator is busy */
+#define VIA_CMD_RGTR_BUSY 0x00000080
+/* 2D Engine is busy */
+#define VIA_2D_ENG_BUSY 0x00000002
+/* 3D Engine is busy */
+#define VIA_3D_ENG_BUSY 0x00000001
+/* Virtual Queue is busy */
+#define VIA_VR_QUEUE_BUSY 0x00020000
+
+#define MAXLOOP 0xFFFFFF
+
+void init_accel(void);
+void init_2d_engine(void);
+void set_2d_color_depth(int);
+void hw_cursor_init(void);
+void show_hw_cursor(struct fb_info *info, int Status); int
+wait_engine_idle(void);
+
+#endif /* __ACCEL_H__ */
diff -Nur a/drivers/video/via/chip.h b/drivers/video/via/chip.h
--- a/drivers/video/via/chip.h 1969-12-31 19:00:00.000000000 -0500
+++ b/drivers/video/via/chip.h 2008-04-29 02:51:15.000000000 -0400
@@ -0,0 +1,189 @@
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2, or (at your
+ option)
+ * any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __CHIP_H__
+#define __CHIP_H__
+
+#include "global.h"
+
+/***************************************/
+/* Definition Graphic Chip Information */
+/***************************************/
+
+#define PCI_VIA_VENDOR_ID 0x1106
+
+/* Define VIA Graphic Chip Name */
+#define UNICHROME_CLE266 1
+#define UNICHROME_CLE266_DID 0x3122
+#define CLE266_REVISION_AX 0x0A
+#define CLE266_REVISION_CX 0x0C
+
+#define UNICHROME_K400 2
+#define UNICHROME_K400_DID 0x7205
+
+#define UNICHROME_K800 3
+#define UNICHROME_K800_DID 0x3108
+
+#define UNICHROME_PM800 4
+#define UNICHROME_PM800_DID 0x3118
+
+#define UNICHROME_CN700 5
+#define UNICHROME_CN700_DID 0x3344
+
+#define UNICHROME_CX700 6
+#define UNICHROME_CX700_DID 0x3157
+#define CX700_REVISION_700 0x0
+#define CX700_REVISION_700M 0x1
+#define CX700_REVISION_700M2 0x2
+
+#define UNICHROME_CN750 7
+#define UNICHROME_CN750_DID 0x3225
+
+#define UNICHROME_K8M890 8
+#define UNICHROME_K8M890_DID 0x3230
+
+#define UNICHROME_P4M890 9
+#define UNICHROME_P4M890_DID 0x3343
+
+#define UNICHROME_P4M900 10
+#define UNICHROME_P4M900_DID 0x3371
+
+#define UNICHROME_VX800 11
+#define UNICHROME_VX800_DID 0x1122
+/**************************************************/
+/* Definition TMDS Trasmitter Information */
+/**************************************************/
+
+/* Definition TMDS Trasmitter Index */
+#define NON_TMDS_TRANSMITTER 0x00
+#define VT1632_TMDS 0x01
+#define INTEGRATED_TMDS 0x42
+
+/* Definition TMDS Trasmitter I2C Slave Address */
+#define VT1632_TMDS_I2C_ADDR 0x10
+
+/**************************************************/
+/* Definition LVDS Trasmitter Information */
+/**************************************************/
+
+/* Definition LVDS Trasmitter Index */
+#define NON_LVDS_TRANSMITTER 0x00
+#define VT1631_LVDS 0x01
+#define VT1636_LVDS 0x0E
+#define INTEGRATED_LVDS 0x41
+
+/* Definition Digital Transmitter Mode */
+#define TX_DATA_12_BITS 0x01
+#define TX_DATA_24_BITS 0x02
+#define TX_DATA_DDR_MODE 0x04
+#define TX_DATA_SDR_MODE 0x08
+
+/* Definition LVDS Trasmitter I2C Slave Address */
+#define VT1631_LVDS_I2C_ADDR 0x70
+#define VT3271_LVDS_I2C_ADDR 0x80
+#define VT1636_LVDS_I2C_ADDR 0x80
+
+struct tmds_chip_information {
+ int tmds_chip_name;
+ int tmds_chip_slave_addr;
+ int dvi_panel_id;
+ int data_mode;
+ int output_interface;
+ int i2c_port;
+ int device_type;
+};
+
+struct lvds_chip_information {
+ int lvds_chip_name;
+ int lvds_chip_slave_addr;
+ int data_mode;
+ int output_interface;
+ int i2c_port;
+};
+
+struct chip_information {
+ int gfx_chip_name;
+ int gfx_chip_revision;
+ int chip_on_slot;
+ struct tmds_chip_information tmds_chip_info;
+ struct lvds_chip_information lvds_chip_info;
+ struct lvds_chip_information lvds_chip_info2; };
+
+struct crt_setting_information {
+ int iga_path;
+ int h_active;
+ int v_active;
+ int bpp;
+ int refresh_rate;
+};
+
+struct tmds_setting_information {
+ int iga_path;
+ int h_active;
+ int v_active;
+ int bpp;
+ int refresh_rate;
+ int get_dvi_size_method;
+ int max_pixel_clock;
+ int dvi_panel_size;
+ int dvi_panel_hres;
+ int dvi_panel_vres;
+ int native_size;
+};
+
+struct lvds_setting_information {
+ int iga_path;
+ int h_active;
+ int v_active;
+ int bpp;
+ int refresh_rate;
+ int get_lcd_size_method;
+ int lcd_panel_id;
+ int lcd_panel_size;
+ int lcd_panel_hres;
+ int lcd_panel_vres;
+ int display_method;
+ int device_lcd_dualedge;
+ int LCDDithering;
+ int lcd_mode;
+ u32 vclk; /*panel mode clock value */
+};
+
+struct GFX_DPA_SETTING {
+ int ClkRangeIndex;
+ u8 DVP0; /* CR96[3:0] */
+ u8 DVP0DataDri_S1; /* SR2A[5] */
+ u8 DVP0DataDri_S; /* SR1B[1] */
+ u8 DVP0ClockDri_S1; /* SR2A[4] */
+ u8 DVP0ClockDri_S; /* SR1E[2] */
+ u8 DVP1; /* CR9B[3:0] */
+ u8 DVP1Driving; /* SR65[3:0], Data and Clock driving */
+ u8 DFPHigh; /* CR97[3:0] */
+ u8 DFPLow; /* CR99[3:0] */
+
+};
+
+struct VT1636_DPA_SETTING {
+ int PanelSizeID;
+ u8 CLK_SEL_ST1;
+ u8 CLK_SEL_ST2;
+};
+#endif /* __CHIP_H__ */
diff -Nur a/drivers/video/via/debug.h b/drivers/video/via/debug.h
--- a/drivers/video/via/debug.h 1969-12-31 19:00:00.000000000 -0500
+++ b/drivers/video/via/debug.h 2008-05-04 06:42:33.000000000 -0400
@@ -0,0 +1,41 @@
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2, or (at your
+ option)
+ * any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __DEBUG_H__
+#define __DEBUG_H__
+
+#ifndef VIAFB_DEBUG
+#define VIAFB_DEBUG 0
+#endif
+
+#if VIAFB_DEBUG
+#define DEBUG_MSG(f, a...) printk(f, ## a)
+#else
+#define DEBUG_MSG(f, a...)
+#endif
+
+#define VIAFB_WARN 0
+#if VIAFB_WARN
+#define WARN_MSG(f, a...) printk(f, ## a)
+#else
+#define WARN_MSG(f, a...)
+#endif
+
+#endif /* __DEBUG_H__ */
diff -Nur a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
--- a/drivers/video/via/dvi.c 1969-12-31 19:00:00.000000000 -0500
+++ b/drivers/video/via/dvi.c 2008-05-04 07:28:49.000000000 -0400
@@ -0,0 +1,721 @@
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2, or (at your
+ option)
+ * any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include "global.h"
+
+int check_tmds_chip(int device_id_subaddr, int device_id) {
+ if (tmds_register_read(device_id_subaddr) == device_id)
+ return (OK);
+ else
+ return (FAIL);
+}
+
+void init_dvi_size(void)
+{
+ DEBUG_MSG(KERN_INFO "init_dvi_size()\n");
+ DEBUG_MSG(KERN_INFO "tmds_setting_info.get_dvi_size_method
%d\n",
+ tmds_setting_info.get_dvi_size_method);
+
+ switch (tmds_setting_info.get_dvi_size_method) {
+ case GET_DVI_SIZE_BY_SYSTEM_BIOS:
+ break;
+ case GET_DVI_SZIE_BY_HW_STRAPPING:
+ break;
+ case GET_DVI_SIZE_BY_VGA_BIOS:
+ default:
+ dvi_get_panel_info();
+ break;
+ }
+ return;
+}
+
+int tmds_trasmitter_identify(void)
+{
+ unsigned char sr2a = 0, sr1e = 0, sr3e = 0;
+
+ /* Turn on ouputting pad */
+ switch (chip_info.gfx_chip_name) {
+ case UNICHROME_K8M890:
+ /*=* DFP Low Pad on *=*/
+ sr2a = read_reg(VIASR, SR2A);
+ write_reg_mask(SR2A, VIASR, 0x03, BIT0 + BIT1);
+ break;
+
+ case UNICHROME_P4M900:
+ case UNICHROME_P4M890:
+ /* DFP Low Pad on */
+ sr2a = read_reg(VIASR, SR2A);
+ write_reg_mask(SR2A, VIASR, 0x03, BIT0 + BIT1);
+ /* DVP0 Pad on */
+ sr1e = read_reg(VIASR, SR1E);
+ write_reg_mask(SR1E, VIASR, 0xC0, BIT6 + BIT7);
+ break;
+
+ default:
+ /* DVP0/DVP1 Pad on */
+ sr1e = read_reg(VIASR, SR1E);
+ write_reg_mask(SR1E, VIASR, 0xF0, BIT4 + BIT5 + BIT6 +
BIT7);
+ /* SR3E[1]Multi-function selection:
+ 0 = Emulate I2C and DDC bus by GPIO2/3/4. */
+ sr3e = read_reg(VIASR, SR3E);
+ write_reg_mask(SR3E, VIASR, 0x0, BIT5);
+ break;
+ }
+
+ /* Check for VT1632: */
+ chip_info.tmds_chip_info.tmds_chip_name = VT1632_TMDS;
+ chip_info.tmds_chip_info.tmds_chip_slave_addr =
VT1632_TMDS_I2C_ADDR;
+ chip_info.tmds_chip_info.i2c_port = I2CPORTINDEX;
+ if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID) !=
FAIL) {
+ /*Currently only support 12bits,dual edge,add 24bits mode later
*/
+ tmds_register_write(0x08, 0x3b);
+
+ DEBUG_MSG(KERN_INFO "\n VT1632 TMDS ! \n");
+ DEBUG_MSG(KERN_INFO "\n %2d",
+ chip_info.tmds_chip_info.tmds_chip_name);
+ DEBUG_MSG(KERN_INFO "\n %2d",
+ chip_info.tmds_chip_info.i2c_port);
+ return (OK);
+ } else {
+ chip_info.tmds_chip_info.i2c_port = GPIOPORTINDEX;
+ if (check_tmds_chip(VT1632_DEVICE_ID_REG,
VT1632_DEVICE_ID)
+ != FAIL) {
+ tmds_register_write(0x08, 0x3b);
+ DEBUG_MSG(KERN_INFO "\n VT1632 TMDS ! \n");
+ DEBUG_MSG(KERN_INFO "\n %2d",
+
chip_info.tmds_chip_info.tmds_chip_name);
+ DEBUG_MSG(KERN_INFO "\n %2d",
+ chip_info.tmds_chip_info.i2c_port);
+ return (OK);
+ }
+ }
+
+ chip_info.tmds_chip_info.tmds_chip_name = INTEGRATED_TMDS;
+
+ if ((chip_info.gfx_chip_name == UNICHROME_CX700) &&
+ ((display_hardware_layout == HW_LAYOUT_DVI_ONLY) ||
+ (display_hardware_layout == HW_LAYOUT_LCD_DVI))) {
+ DEBUG_MSG(KERN_INFO "\n Integrated TMDS ! \n");
+ return (OK);
+ }
+
+ switch (chip_info.gfx_chip_name) {
+ case UNICHROME_K8M890:
+ write_reg(SR2A, VIASR, sr2a);
+ break;
+
+ case UNICHROME_P4M900:
+ case UNICHROME_P4M890:
+ write_reg(SR2A, VIASR, sr2a);
+ write_reg(SR1E, VIASR, sr1e);
+ break;
+
+ default:
+ write_reg(SR1E, VIASR, sr1e);
+ write_reg(SR3E, VIASR, sr3e);
+ break;
+ }
+
+ chip_info.tmds_chip_info.tmds_chip_name = NON_TMDS_TRANSMITTER;
+ chip_info.tmds_chip_info.tmds_chip_slave_addr =
VT1632_TMDS_I2C_ADDR;
+ return (FAIL);
+}
+
+void tmds_register_write(int index, u8 data) {
+ u8 tmp;
+
+ tmp = chip_info.chip_on_slot;
+ switch (chip_info.tmds_chip_info.i2c_port) {
+ case I2CPORTINDEX:
+ chip_info.chip_on_slot = PORT_ON_AMR;
+ break;
+
+ case GPIOPORTINDEX:
+ default:
+ chip_info.chip_on_slot = PORT_ON_AGP;
+ break;
+ }
+
+ i2cWriteByte(chip_info.tmds_chip_info.tmds_chip_slave_addr,
index,
+ data);
+
+ chip_info.chip_on_slot = tmp;
+
+}
+
+int tmds_register_read(int index)
+{
+ u8 data;
+ int status;
+ u8 tmp;
+
+ tmp = chip_info.chip_on_slot;
+ switch (chip_info.tmds_chip_info.i2c_port) {
+ case I2CPORTINDEX:
+ chip_info.chip_on_slot = PORT_ON_AMR;
+ break;
+
+ case GPIOPORTINDEX:
+ default:
+ chip_info.chip_on_slot = PORT_ON_AGP;
+ break;
+ }
+
+ status =
+ i2cReadByte((u8)
chip_info.tmds_chip_info.tmds_chip_slave_addr,
+ (u8) index, &data);
+ chip_info.chip_on_slot = tmp;
+ return (data);
+}
+
+int tmds_register_read_bytes(int index, u8 *buff, int buff_len) {
+ int status;
+ u8 tmp;
+
+ tmp = chip_info.chip_on_slot;
+ switch (chip_info.tmds_chip_info.i2c_port) {
+ case I2CPORTINDEX:
+ chip_info.chip_on_slot = PORT_ON_AMR;
+ break;
+
+ case GPIOPORTINDEX:
+ default:
+ chip_info.chip_on_slot = PORT_ON_AGP;
+ break;
+ }
+
+ status =
+ i2cReadBytes((u8) chip_info.tmds_chip_info.
+ tmds_chip_slave_addr, (u8) index, buff,
buff_len);
+ chip_info.chip_on_slot = tmp;
+ return (status);
+}
+
+int check_reduce_blanking_mode(int mode_index, int refresh_rate) {
+ if (refresh_rate != 60)
+ return (FALSE);
+
+ switch (mode_index) {
+ /* Following modes have reduce blanking mode. */
+ case VIA_RES_1360X768:
+ case VIA_RES_1400X1050:
+ case VIA_RES_1440X900:
+ case VIA_RES_1600X900:
+ case VIA_RES_1680X1050:
+ case VIA_RES_1920X1080:
+ case VIA_RES_1920X1200:
+ break;
+
+ default:
+ DEBUG_MSG(KERN_INFO
+ "This dvi mode %d have no reduce blanking
mode!\n",
+ mode_index);
+ return (FALSE);
+ }
+
+ return (TRUE);
+}
+
+/* DVI Set Mode */
+void dvi_set_mode(int video_index, int mode_bpp, int set_iga) {
+ struct VideoModeTable *videoMode = NULL;
+ struct crt_mode_table *pDviTiming;
+ unsigned long desirePixelClock, maxPixelClock;
+ int status = 0;
+ videoMode = get_modetbl_pointer(video_index);
+ pDviTiming = videoMode->crtc;
+ desirePixelClock = pDviTiming->clk / 1000000;
+ maxPixelClock = (unsigned
long)tmds_setting_info.max_pixel_clock;
+
+ DEBUG_MSG(KERN_INFO "\nDVI_set_mode!!\n");
+
+ if ((maxPixelClock != 0) && (desirePixelClock > maxPixelClock))
{
+ /*Check if reduce-blanking mode is exist */
+ status =
+ check_reduce_blanking_mode(video_index,
+
pDviTiming->refresh_rate);
+ if (status) {
+ video_index += 100; /*Use reduce-blanking
mode */
+ videoMode = get_modetbl_pointer(video_index);
+ pDviTiming = videoMode->crtc;
+ DEBUG_MSG(KERN_INFO
+ "DVI use reduce blanking mode %d!!\n",
+ video_index);
+ }
+ }
+ fill_crtc_timing(pDviTiming, video_index, mode_bpp / 8,
set_iga);
+ set_output_path(DEVICE_DVI, set_iga,
+ chip_info.tmds_chip_info.output_interface);
+}
+
+/* Sense DVI Connector */
+int dvi_sense(void)
+{
+ u8 RegSR1E = 0, RegSR3E = 0, RegCR6B = 0, RegCR91 = 0, RegCR93 =
+ 0, RegCR9B = 0, data;
+ int ret = FALSE;
+
+ DEBUG_MSG(KERN_INFO "dvi_sense!!\n");
+
+ if (chip_info.gfx_chip_name == UNICHROME_CLE266) {
+ /* DI1 Pad on */
+ RegSR1E = read_reg(VIASR, SR1E);
+ write_reg(SR1E, VIASR, RegSR1E | 0x30);
+
+ /* CR6B[0]VCK Input Selection: 1 = External clock. */
+ RegCR6B = read_reg(VIACR, CR6B);
+ write_reg(CR6B, VIACR, RegCR6B | 0x08);
+
+ /* CR91[4] VDD On [3] Data On [2] VEE On [1] Back Light
Off
+ [0] Software Control Power Sequence */
+ RegCR91 = read_reg(VIACR, CR91);
+ write_reg(CR91, VIACR, 0x1D);
+
+ /* CR93[7] DI1 Data Source Selection: 1 = DSP2.
+ CR93[5] DI1 Clock Source: 1 = internal.
+ CR93[4] DI1 Clock Polarity.
+ CR93[3:1] DI1 Clock Adjust. CR93[0] DI1 enable */
+ RegCR93 = read_reg(VIACR, CR93);
+ write_reg(CR93, VIACR, 0x01);
+ } else {
+ /* DVP0/DVP1 Pad on */
+ RegSR1E = read_reg(VIASR, SR1E);
+ write_reg(SR1E, VIASR, RegSR1E | 0xF0);
+
+ /* SR3E[1]Multi-function selection:
+ 0 = Emulate I2C and DDC bus by GPIO2/3/4. */
+ RegSR3E = read_reg(VIASR, SR3E);
+ write_reg(SR3E, VIASR, RegSR3E & (~0x20));
+
+ /* CR91[4] VDD On [3] Data On [2] VEE On [1] Back Light
Off
+ [0] Software Control Power Sequence */
+ RegCR91 = read_reg(VIACR, CR91);
+ write_reg(CR91, VIACR, 0x1D);
+
+ /*CR9B[4] DVP1 Data Source Selection: 1 = From secondary
+ display.CR9B[2:0] DVP1 Clock Adjust */
+ RegCR9B = read_reg(VIACR, CR9B);
+ write_reg(CR9B, VIACR, 0x01);
+ }
+
+ data = (u8) tmds_register_read(0x09);
+ if (data & 0x04)
+ ret = TRUE;
+
+ if (ret == FALSE) {
+ if (dvi_query_EDID())
+ ret = TRUE;
+ }
+
+ /* Restore status */
+ if (chip_info.gfx_chip_name == UNICHROME_CLE266) {
+ write_reg(SR1E, VIASR, RegSR1E);
+ write_reg(CR6B, VIACR, RegCR6B);
+ write_reg(CR91, VIACR, RegCR91);
+ write_reg(CR93, VIACR, RegCR93);
+ } else {
+ write_reg(SR1E, VIASR, RegSR1E);
+ write_reg(SR3E, VIASR, RegSR3E);
+ write_reg(CR91, VIACR, RegCR91);
+ write_reg(CR9B, VIACR, RegCR9B);
+ }
+
+ return ret;
+}
+
+/* Query Flat Panel's EDID Table Version Through DVI Connector */ int
+dvi_query_EDID(void) {
+ u8 data0, data1;
+ int restore;
+
+ DEBUG_MSG(KERN_INFO "dvi_query_EDID!!\n");
+
+ restore = chip_info.tmds_chip_info.tmds_chip_slave_addr;
+ chip_info.tmds_chip_info.tmds_chip_slave_addr = 0xA0;
+
+ data0 = (u8) tmds_register_read(0x00);
+ data1 = (u8) tmds_register_read(0x01);
+ if ((data0 == 0) && (data1 == 0xFF)) {
+ chip_info.tmds_chip_info.tmds_chip_slave_addr = restore;
+ return (EDID_VERSION_1); /* Found EDID1 Table */
+ }
+
+ data0 = (u8) tmds_register_read(0x00);
+ chip_info.tmds_chip_info.tmds_chip_slave_addr = restore;
+ if (data0 == 0x20)
+ return (EDID_VERSION_2); /* Found EDID2 Table */
+ else
+ return (FALSE);
+}
+
+/*
+ *
+ * int dvi_get_panel_size_from_DDCv1(void)
+ *
+ * - Get Panel Size Using EDID1 Table
+ *
+ * Return Type: int
+ *
+ */
+int dvi_get_panel_size_from_DDCv1(void)
+{
+ int i, max_h = 0, max_v = 0, tmp, restore;
+ unsigned char rData;
+ unsigned char EDID_DATA[18];
+
+ DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv1 \n");
+
+ restore = chip_info.tmds_chip_info.tmds_chip_slave_addr;
+ chip_info.tmds_chip_info.tmds_chip_slave_addr = 0xA0;
+
+ for (i = 0x23; i < 0x6D; i++) {
+ switch (i) {
+ case 0x23:
+ rData = tmds_register_read(0x23);
+ if (rData & 0x3C)
+ max_h = 640;
+ if (rData & 0xC0)
+ max_h = 720;
+ if (rData & 0x03)
+ max_h = 800;
+ break;
+ case 0x24:
+ rData = tmds_register_read(0x24);
+ if (rData & 0xC0)
+ max_h = 800;
+ if (rData & 0x1E)
+ max_h = 1024;
+ if (rData & 0x01)
+ max_h = 1280;
+ break;
+ case 0x26:
+ case 0x28:
+ case 0x2A:
+ case 0x2C:
+ case 0x2E:
+ case 0x30:
+ case 0x32:
+ case 0x34:
+ rData = tmds_register_read(i);
+ if (rData == 1)
+ break;
+ /* data = (data + 31) * 8 */
+ tmp = (rData + 31) << 3;
+ if (tmp > max_h)
+ max_h = tmp;
+ break;
+
+ case 0x36:
+ case 0x48:
+ case 0x5A:
+ case 0x6C:
+ tmds_register_read_bytes(i, EDID_DATA, 10);
+ if (!(EDID_DATA[0] || EDID_DATA[1])) {
+ /* The first two byte must be zero. */
+ if (EDID_DATA[3] == 0xFD) {
+ /* To get max pixel clock. */
+
tmds_setting_info.max_pixel_clock =
+ EDID_DATA[9] * 10;
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+ }
+
+ switch (max_h) {
+ case 640:
+ tmds_setting_info.dvi_panel_size = VIA_RES_640X480;
+ break;
+ case 800:
+ tmds_setting_info.dvi_panel_size = VIA_RES_800X600;
+ break;
+ case 1024:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1024X768;
+ break;
+ case 1280:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1280X1024;
+ break;
+ case 1400:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1400X1050;
+ break;
+ case 1440:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1440X1050;
+ break;
+ case 1600:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1600X1200;
+ break;
+ case 1920:
+ if (max_v == 1200)
+ tmds_setting_info.dvi_panel_size =
VIA_RES_1920X1200;
+ else
+ tmds_setting_info.dvi_panel_size =
VIA_RES_1920X1080;
+ break;
+ default:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1024X768;
+ DEBUG_MSG(KERN_INFO "Unknow panel size max resolution =
%d !\
+ set default panel size.\n",
max_h);
+ break;
+ }
+
+ DEBUG_MSG(KERN_INFO "DVI max pixelclock = %d\n",
+ tmds_setting_info.max_pixel_clock);
+ chip_info.tmds_chip_info.tmds_chip_slave_addr = restore;
+ return tmds_setting_info.dvi_panel_size; }
+
+/*
+ *
+ * int dvi_get_panel_size_from_DDCv2(void)
+ *
+ * - Get Panel Size Using EDID2 Table
+ *
+ * Return Type: int
+ *
+ */
+int dvi_get_panel_size_from_DDCv2(void)
+{
+ int HSize = 0, restore;
+ unsigned char R_Buffer[2];
+
+ DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv2 \n");
+
+ restore = chip_info.tmds_chip_info.tmds_chip_slave_addr;
+ chip_info.tmds_chip_info.tmds_chip_slave_addr = 0xA2;
+
+ /* Horizontal: 0x76, 0x77 */
+ tmds_register_read_bytes(0x76, R_Buffer, 2);
+ HSize = R_Buffer[0];
+ HSize += R_Buffer[1] << 8;
+
+ switch (HSize) {
+ case 640:
+ tmds_setting_info.dvi_panel_size = VIA_RES_640X480;
+ break;
+ case 800:
+ tmds_setting_info.dvi_panel_size = VIA_RES_800X600;
+ break;
+ case 1024:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1024X768;
+ break;
+ case 1280:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1280X1024;
+ break;
+ case 1400:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1400X1050;
+ break;
+ case 1440:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1440X1050;
+ break;
+ case 1600:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1600X1200;
+ break;
+ default:
+ tmds_setting_info.dvi_panel_size = VIA_RES_1024X768;
+ DEBUG_MSG(KERN_INFO "Unknow panel size max resolution =
%d!\
+ set default panel size.\n",
HSize);
+ break;
+ }
+
+ chip_info.tmds_chip_info.tmds_chip_slave_addr = restore;
+ return tmds_setting_info.dvi_panel_size; }
+
+/*
+ *
+ * unsigned char dvi_get_panel_info(void)
+ *
+ * - Get Panel Size
+ *
+ * Return Type: unsigned char
+ */
+unsigned char dvi_get_panel_info(void)
+{
+ DEBUG_MSG(KERN_INFO "dvi_get_panel_info! \n");
+
+ dvi_sense();
+ switch (dvi_query_EDID()) {
+ case 1:
+ dvi_get_panel_size_from_DDCv1();
+ break;
+ case 2:
+ dvi_get_panel_size_from_DDCv2();
+ break;
+ default:
+ break;
+ }
+
+ DEBUG_MSG(KERN_INFO "dvi panel size is %2d \n",
+ tmds_setting_info.dvi_panel_size);
+ return (unsigned char)(tmds_setting_info.dvi_panel_size);
+}
+
+/* If Disable DVI, turn off pad */
+void dvi_disable(void)
+{
+ if (chip_info.tmds_chip_info.output_interface == INTERFACE_DVP0)
+ write_reg(SR1E, VIASR, read_reg(VIASR, SR1E) & (~0xC0));
+
+ if (chip_info.tmds_chip_info.output_interface == INTERFACE_DVP1)
+ write_reg(SR1E, VIASR, read_reg(VIASR, SR1E) & (~0x30));
+
+ if (chip_info.tmds_chip_info.output_interface ==
INTERFACE_DFP_HIGH)
+ write_reg(SR2A, VIASR, read_reg(VIASR, SR2A) & (~0x0C));
+
+ if (chip_info.tmds_chip_info.output_interface ==
INTERFACE_DFP_LOW)
+ write_reg(SR2A, VIASR, read_reg(VIASR, SR2A) & (~0x03));
+
+ if (chip_info.tmds_chip_info.output_interface == INTERFACE_TMDS)
+ /* Turn off TMDS power. */
+ write_reg(CRD2, VIACR, read_reg(VIACR, CRD2) | 0x08); }
+
+/* If Enable DVI, turn off pad */
+void dvi_enable(void)
+{
+ if (chip_info.tmds_chip_info.output_interface == INTERFACE_DVP0)
{
+ write_reg(SR1E, VIASR, read_reg(VIASR, SR1E) | 0xC0);
+ if (chip_info.gfx_chip_name == UNICHROME_CLE266)
+ tmds_register_write(0x88, 0x3b);
+ else
+ /*clear CR91[5] to direct on display period
+ in the secondary diplay path */
+ write_reg(CR91, VIACR, read_reg(VIACR, CR91) &
0xDF);
+ }
+
+ if (chip_info.tmds_chip_info.output_interface == INTERFACE_DVP1)
{
+ write_reg(SR1E, VIASR, read_reg(VIASR, SR1E) | 0x30);
+
+ /*fix dvi cann't be enabled with MB VT5718C4 - Al Zhang
*/
+ if (chip_info.gfx_chip_name == UNICHROME_CLE266) {
+ tmds_register_write(0x88, 0x3b);
+ } else {
+ /*clear CR91[5] to direct on display period
+ in the secondary diplay path */
+ write_reg(CR91, VIACR, read_reg(VIACR, CR91) &
0xDF);
+ }
+
+ /*fix DVI cannot enable on EPIA-M board */
+ if (platform_epia_dvi == 1) {
+ write_reg_mask(CR91, VIACR, 0x1f, 0x1f);
+ write_reg_mask(CR88, VIACR, 0x00, BIT6 + BIT0);
+ if (via_bus_width == 24) {
+ if (device_lcd_dualedge == 1)
+ i2cWriteByte(chip_info.
+ tmds_chip_info.
+
tmds_chip_slave_addr,
+ 0x08, 0x3F);
+ else
+ i2cWriteByte(chip_info.
+ tmds_chip_info.
+
tmds_chip_slave_addr,
+ 0x08, 0x37);
+ }
+ }
+ }
+
+ if (chip_info.tmds_chip_info.output_interface ==
INTERFACE_DFP_HIGH) {
+ write_reg(SR2A, VIASR, read_reg(VIASR, SR2A) | 0x0C);
+ write_reg(CR91, VIACR, read_reg(VIACR, CR91) & 0xDF);
+ }
+
+ if (chip_info.tmds_chip_info.output_interface ==
INTERFACE_DFP_LOW) {
+ write_reg(SR2A, VIASR, read_reg(VIASR, SR2A) | 0x03);
+ write_reg(CR91, VIACR, read_reg(VIACR, CR91) & 0xDF);
+ }
+ if (chip_info.tmds_chip_info.output_interface == INTERFACE_TMDS)
{
+ /* Turn on Display period in the panel path. */
+ write_reg_mask(CR91, VIACR, 0, BIT7);
+
+ /* Turn on TMDS power. */
+ write_reg_mask(CRD2, VIACR, 0, BIT3);
+ }
+}
+
+int check_hdmi_connected_device(void)
+{
+ int bEdidExist = FALSE;
+ u8 byTemp = 0, byTemp1 = 0, byTemp2 = 0;
+ u8 byVendorDataBlock;
+ int restore, result = DEV_CONNECT_DVI;
+
+ restore = chip_info.tmds_chip_info.tmds_chip_slave_addr;
+ chip_info.tmds_chip_info.tmds_chip_slave_addr = 0xA0;
+ byTemp = (u8) tmds_register_read(0x00);
+
+ if (byTemp == 0x00) {
+ byTemp = (u8) tmds_register_read(0x01);
+ if (byTemp == 0xFF)
+ bEdidExist = TRUE;
+ }
+
+ if (bEdidExist) {
+ byTemp = (u8) tmds_register_read(0x80);
+ byTemp1 = (u8) tmds_register_read(0x81);
+
+ if (byTemp == 0x02 && byTemp1 == 0x03) {
+ byTemp = (u8) tmds_register_read(0x82);
+
+ if (!(byTemp == 0 || byTemp == 4)) {
+ byVendorDataBlock = 0x82 + 2;
+
+ byTemp1 = (u8)
+
tmds_register_read(byVendorDataBlock);
+ while ((byTemp1 & 0xE0) != 0x60
+ && byVendorDataBlock < (byTemp +
0x82)) {
+ byTemp1 &= 0x1F;
+
+ byVendorDataBlock += (byTemp1 +
1);
+
+ byTemp1 = (u8)
+ tmds_register_read
+ (byVendorDataBlock);
+ }
+ if ((byTemp1 & 0xE0) == 0x60) {
+ byTemp = (u8)
+ tmds_register_read
+ (byVendorDataBlock + 1);
+ byTemp1 = (u8)
+ tmds_register_read
+ (byVendorDataBlock + 2);
+ byTemp2 = (u8)
+ tmds_register_read
+ (byVendorDataBlock + 3);
+
+ if (byTemp == 0x03
+ && byTemp1 == 0x0C
+ && byTemp2 == 0x00)
+ result =
DEV_CONNECT_HDMI;
+ }
+ }
+ }
+ }
+
+ chip_info.tmds_chip_info.tmds_chip_slave_addr = restore;
+ return result;
+}
^ permalink raw reply [flat|nested] 4+ messages in thread