linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Andrew Morton <akpm@linux-foundation.org>,
	Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev-devel@lists.sourceforge.net,
	Timur Tabi <timur@freescale.com>
Subject: [PATCH] fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some	warnings
Date: Fri, 6 Jun 2008 18:55:52 +0400	[thread overview]
Message-ID: <20080606145552.GA24276@polina.dev.rtsoft.ru> (raw)

This patch fixes following build error when CONFIG_PM is set.

  CC      drivers/video/fsl-diu-fb.o
drivers/video/fsl-diu-fb.c: In function 'fsl_diu_suspend':
drivers/video/fsl-diu-fb.c:1327: error: 'ofdev' undeclared (first use in this function)
drivers/video/fsl-diu-fb.c:1327: error: (Each undeclared identifier is reported only once
drivers/video/fsl-diu-fb.c:1327: error: for each function it appears in.)
drivers/video/fsl-diu-fb.c: In function 'fsl_diu_resume':
drivers/video/fsl-diu-fb.c:1337: error: 'ofdev' undeclared (first use in this function)

While I'm at it, also fix this warning:

drivers/video/fsl-diu-fb.c: In function 'fsl_diu_alloc':
drivers/video/fsl-diu-fb.c:314: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t'

And these section mismatches:

..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb()
..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb()
..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db
..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db
..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb()
..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb()

Also, some sparse fixes: make two functions static, and use NULL where
appropriate. There are still a lot of sparse warnings, mainly wrt absence
of __iomem annotations, but some will require ugly __force stuff. I'll leave
them for now, since proper fix would be not that trivial as few one-liners
below.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/video/fsl-diu-fb.c |   29 +++++++++++++++--------------
 1 files changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index b50bb03..7a78fd5 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -286,7 +286,7 @@ static struct diu_pool pool;
  *	rheap and make the furture large allocation fail.
  */
 
-void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
+static void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
 {
 	void *virt;
 
@@ -311,12 +311,12 @@ void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
 		memset(virt, 0, size);
 	}
 
-	pr_debug("rh virt=%p phys=%lx\n", virt, *phys);
+	pr_debug("rh virt=%p phys=%llx\n", virt, (unsigned long long)*phys);
 
 	return virt;
 }
 
-void fsl_diu_free(void *p, unsigned long size)
+static void fsl_diu_free(void *p, unsigned long size)
 {
 	pr_debug("p=%p size=%lu\n", p, size);
 
@@ -770,7 +770,7 @@ static int map_video_memory(struct fb_info *info)
 	info->fix.smem_len = info->fix.line_length * info->var.yres_virtual;
 	pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len);
 	info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys);
-	if (info->screen_base == 0) {
+	if (info->screen_base == NULL) {
 		printk(KERN_ERR "Unable to allocate fb memory\n");
 		return -ENOMEM;
 	}
@@ -788,7 +788,7 @@ static int map_video_memory(struct fb_info *info)
 static void unmap_video_memory(struct fb_info *info)
 {
 	fsl_diu_free(info->screen_base, info->fix.smem_len);
-	info->screen_base = 0;
+	info->screen_base = NULL;
 	info->fix.smem_start = 0;
 	info->fix.smem_len = 0;
 }
@@ -1158,7 +1158,7 @@ static int init_fbinfo(struct fb_info *info)
 	return 0;
 }
 
-static int install_fb(struct fb_info *info)
+static int __devinit install_fb(struct fb_info *info)
 {
 	int rc;
 	struct mfb_info *mfbi = info->par;
@@ -1233,7 +1233,7 @@ static int install_fb(struct fb_info *info)
 	return 0;
 }
 
-static void __exit uninstall_fb(struct fb_info *info)
+static void uninstall_fb(struct fb_info *info)
 {
 	struct mfb_info *mfbi = info->par;
 
@@ -1287,7 +1287,7 @@ static int request_irq_local(int irq)
 	/* Read to clear the status */
 	status = in_be32(&hw->int_status);
 
-	ret = request_irq(irq, fsl_diu_isr, 0, "diu", 0);
+	ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL);
 	if (ret)
 		pr_info("Request diu IRQ failed.\n");
 	else {
@@ -1312,7 +1312,7 @@ static void free_irq_local(int irq)
 	/* Disable all LCDC interrupt */
 	out_be32(&hw->int_mask, 0x1f);
 
-	free_irq(irq, 0);
+	free_irq(irq, NULL);
 }
 
 #ifdef CONFIG_PM
@@ -1324,7 +1324,7 @@ static int fsl_diu_suspend(struct of_device *dev, pm_message_t state)
 {
 	struct fsl_diu_data *machine_data;
 
-	machine_data = dev_get_drvdata(&ofdev->dev);
+	machine_data = dev_get_drvdata(&dev->dev);
 	disable_lcdc(machine_data->fsl_diu_info[0]);
 
 	return 0;
@@ -1334,7 +1334,7 @@ static int fsl_diu_resume(struct of_device *dev)
 {
 	struct fsl_diu_data *machine_data;
 
-	machine_data = dev_get_drvdata(&ofdev->dev);
+	machine_data = dev_get_drvdata(&dev->dev);
 	enable_lcdc(machine_data->fsl_diu_info[0]);
 
 	return 0;
@@ -1353,7 +1353,8 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
 	dma_addr_t paddr = 0;
 
 	ssize = size + bytes_align;
-	buf->vaddr = dma_alloc_coherent(0, ssize, &paddr, GFP_DMA | __GFP_ZERO);
+	buf->vaddr = dma_alloc_coherent(NULL, ssize, &paddr, GFP_DMA |
+							     __GFP_ZERO);
 	if (!buf->vaddr)
 		return -ENOMEM;
 
@@ -1371,7 +1372,7 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
 
 static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
 {
-	dma_free_coherent(0, size + bytes_align,
+	dma_free_coherent(NULL, size + bytes_align,
 				buf->vaddr, (buf->paddr - buf->offset));
 	return;
 }
@@ -1411,7 +1412,7 @@ static ssize_t show_monitor(struct device *device,
 	return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
 }
 
-static int fsl_diu_probe(struct of_device *ofdev,
+static int __devinit fsl_diu_probe(struct of_device *ofdev,
 	const struct of_device_id *match)
 {
 	struct device_node *np = ofdev->node;
-- 
1.5.5.1

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php

             reply	other threads:[~2008-06-06 14:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-06 14:55 Anton Vorontsov [this message]
2008-06-06 15:25 ` [PATCH] fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warnings York Sun
2008-06-30 19:40   ` Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080606145552.GA24276@polina.dev.rtsoft.ru \
    --to=avorontsov@ru.mvista.com \
    --cc=adaplas@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-fbdev-devel@lists.sourceforge.net \
    --cc=timur@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).