From: Andrew Morton <akpm@linux-foundation.org>
To: Alexander Beregalov <a.beregalov@gmail.com>
Cc: kernel-janitors@vger.kernel.org, syrjala@sci.fi,
linux-fbdev-devel@lists.sourceforge.net,
linux-kernel@vger.kernel.org, adaplas@gmail.com
Subject: Re: [PATCH] atyfb_base.c: fix warning
Date: Thu, 31 Jul 2008 02:15:52 -0700 [thread overview]
Message-ID: <20080731021552.2f5fe6d6.akpm@linux-foundation.org> (raw)
In-Reply-To: <20080730210352.GA29355@orion>
On Thu, 31 Jul 2008 01:03:52 +0400 Alexander Beregalov <a.beregalov@gmail.com> wrote:
> From: Alexander Beregalov <a.beregalov@gmail.com>
>
> atyfb_base.c: fix warning
>
> drivers/video/aty/atyfb_base.c:2663: warning: 'aty_resume_chip' defined
> but not used
>
> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
> Cc: Ville Syrjala <syrjala@sci.fi>
> Cc: Antonino A. Daplas <adaplas@pol.net>
> ---
>
> drivers/video/aty/atyfb_base.c | 4 ++++
> 1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
> index 620ba81..9e5dfb1 100644
> --- a/drivers/video/aty/atyfb_base.c
> +++ b/drivers/video/aty/atyfb_base.c
> @@ -244,7 +244,9 @@ static int atyfb_sync(struct fb_info *info);
> */
>
> static int aty_init(struct fb_info *info);
> +#if defined(CONFIG_PM) && defined(CONFIG_PCI)
> static void aty_resume_chip(struct fb_info *info);
> +#endif
> #ifdef CONFIG_ATARI
> static int store_video_par(char *videopar, unsigned char m64_num);
> #endif
> @@ -2659,6 +2661,7 @@ aty_init_exit:
> return ret;
> }
>
> +#if defined(CONFIG_PM) && defined(CONFIG_PCI)
> static void aty_resume_chip(struct fb_info *info)
> {
> struct atyfb_par *par = info->par;
> @@ -2671,6 +2674,7 @@ static void aty_resume_chip(struct fb_info *info)
> if (par->aux_start)
> aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
> }
> +#endif /* defined(CONFIG_PM) && defined(CONFIG_PCI) */
>
> #ifdef CONFIG_ATARI
> static int __devinit store_video_par(char *video_str, unsigned char m64_num)
OK...
We don't strictly need the first ifdef - it's OK to declare a
non-existent function, and ifdefs are ugly.
But we can reorganise the code a bit more and remove the forward
declaration altogether and remove a whole ifdef block too.
How does this look?
drivers/video/aty/atyfb_base.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)
diff -puN drivers/video/aty/atyfb_base.c~atyfb_basec-fix-warning drivers/video/aty/atyfb_base.c
--- a/drivers/video/aty/atyfb_base.c~atyfb_basec-fix-warning
+++ a/drivers/video/aty/atyfb_base.c
@@ -244,7 +244,7 @@ static int atyfb_sync(struct fb_info *in
*/
static int aty_init(struct fb_info *info);
-static void aty_resume_chip(struct fb_info *info);
+
#ifdef CONFIG_ATARI
static int store_video_par(char *videopar, unsigned char m64_num);
#endif
@@ -2023,6 +2023,20 @@ static int atyfb_pci_suspend(struct pci_
return 0;
}
+static void aty_resume_chip(struct fb_info *info)
+{
+ struct atyfb_par *par = info->par;
+
+ aty_st_le32(MEM_CNTL, par->mem_cntl, par);
+
+ if (par->pll_ops->resume_pll)
+ par->pll_ops->resume_pll(info, &par->pll);
+
+ if (par->aux_start)
+ aty_st_le32(BUS_CNTL,
+ aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
+}
+
static int atyfb_pci_resume(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
@@ -2659,19 +2673,6 @@ aty_init_exit:
return ret;
}
-static void aty_resume_chip(struct fb_info *info)
-{
- struct atyfb_par *par = info->par;
-
- aty_st_le32(MEM_CNTL, par->mem_cntl, par);
-
- if (par->pll_ops->resume_pll)
- par->pll_ops->resume_pll(info, &par->pll);
-
- if (par->aux_start)
- aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
-}
-
#ifdef CONFIG_ATARI
static int __devinit store_video_par(char *video_str, unsigned char m64_num)
{
_
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
next prev parent reply other threads:[~2008-07-31 9:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-30 21:03 [PATCH] atyfb_base.c: fix warning Alexander Beregalov
2008-07-31 1:14 ` M. Asselstine
2008-07-31 9:15 ` Andrew Morton [this message]
2008-07-31 12:47 ` M. Asselstine
-- strict thread matches above, loose matches on Subject: below --
2008-07-31 8:29 krzysztof.h1
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080731021552.2f5fe6d6.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=a.beregalov@gmail.com \
--cc=adaplas@gmail.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=syrjala@sci.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).