[PATCH] uvesafb: fix selecting mode with the vbemode option

[Michal Januszewski <spock@gentoo.org>]

If the vbemode option is used, uvesafb calls fb_get_mode() without
first setting the resolution in info->var.  This results in a division
by zero in fb_get_mode(), as evidenced e.g. in [1].  Fix this by ensuring
the info->var structure is populated before fb_get_mode() is called.

[1] http://bugzilla.kernel.org/show_bug.cgi?id=11661#c37

Signed-off-by: Michal Januszewski <spock@gentoo.org>
---
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 5074422..592c302 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -842,14 +842,16 @@ static int __devinit uvesafb_vbe_init_mode(struct fb_info *info)
 	if (vbemode) {
 		for (i = 0; i < par->vbe_modes_cnt; i++) {
 			if (par->vbe_modes[i].mode_id == vbemode) {
+				modeid = i;
+				uvesafb_setup_var(&info->var, info,
+						&par->vbe_modes[modeid]);
 				fb_get_mode(FB_VSYNCTIMINGS | FB_IGNOREMON, 60,
-							&info->var, info);
+						&info->var, info);
 				/*
 				 * With pixclock set to 0, the default BIOS
 				 * timings will be used in set_par().
 				 */
 				info->var.pixclock = 0;
-				modeid = i;
 				goto gotmode;
 			}
 		}
@@ -896,8 +898,11 @@ static int __devinit uvesafb_vbe_init_mode(struct fb_info *info)
 			fb_videomode_to_var(&info->var, mode);
 		} else {
 			modeid = par->vbe_modes[0].mode_id;
+			uvesafb_setup_var(&info->var, info,
+					&par->vbe_modes[modeid]);
 			fb_get_mode(FB_VSYNCTIMINGS | FB_IGNOREMON, 60,
-				    &info->var, info);
+					&info->var, info);
+
 			goto gotmode;
 		}
 	}
@@ -909,9 +914,9 @@ static int __devinit uvesafb_vbe_init_mode(struct fb_info *info)
 	if (modeid == -1)
 		return -EINVAL;
 
-gotmode:
 	uvesafb_setup_var(&info->var, info, &par->vbe_modes[modeid]);
 
+gotmode:
 	/*
 	 * If we are not VBE3.0+ compliant, we're done -- the BIOS will
 	 * ignore our timings anyway.