From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
To: jkimble@one.net
Cc: linux-fbdev-devel@lists.sourceforge.net
Subject: Re: Seg fault on any FB write (Epson S1D13A04onColdfire running 2.6.25)
Date: Tue, 11 Nov 2008 20:14:06 +0100 [thread overview]
Message-ID: <20081111201406.7c1babfb.kristoffer.ericson@gmail.com> (raw)
In-Reply-To: <47826.137.237.242.138.1226426531.squirrel@webmail.nuvox.net>
[-- Attachment #1.1: Type: text/plain, Size: 2835 bytes --]
On Tue, 11 Nov 2008 13:02:11 -0500 (EST)
jkimble@one.net wrote:
>
> Sorry, I was hacking around just to get something to work. If you look at
> the two side by side you'll see that I've not changed that much. The
> changes are mostly just plugging in my specific info for the panel I'm
> using.
>
> I've not worked with patches much so I'll have to figure out how to do that.
Perhaps you should include the old patch to 2.6.10 since
we know that worked and take it from there? In theory
all you should need are the basic mappings and
perhaps and reg init structure.
>
>
> > On Tue, 11 Nov 2008 16:04:03 +0100
> > Hinko Kocevar <hinko.kocevar@cetrtapot.si> wrote:
> >
> >> jkimble@one.net wrote:
> >> >> James Kimble wrote:
> >> >
> >> > /proc/iomem shows:
> >> >
> >> > 74000000-74009000 : s1d13a04fb.0
> >> > 74000000-74009000 : s1d13xxxfb regs
> >> > 74040000-74068000 : s1d13a04fb.0
> >> > 74040000-74068000 : s1d13xxxfb mem
> >>
> >> I'm not sure if this is correct - two drivers mapped the same region
> >> twice !?
> >> Maybe the experts will shed some light on this..
> >>
> >> > f000070c-f000070c : spi-int-mask
> >> > f0000740-f000075f : spi-int-level
> >> > f0000a50-f0000a50 : spi-par
> >> > f0008a00-f0008ab8 : spi-module
> >> > f0008f00-f0008f20 : MCF548X-i2c
> >> > f000a000-f000a7ff : mcf548x-flexcan.0
> >> > f000a000-f000a7ff : mcf548x-flexcan
> >> > f000a800-f000afff : mcf548x-flexcan.1
> >> > f000a800-f000afff : mcf548x-flexcan
> >> > f0020000-f0033000 : fsl-sec1
> >> > fc000000-ffffffff : physmap-flash.0
> >> >
> >>
> >> I haven't took a long look at your driver, but here is our driver for
> >> S13706FB that
> >> we use on our embedded platform. Hope it helps.
> >
> > Any chance of getting a patch against s1d13xxxfb?
> >
> >>
> >> Regards,
> >> Hinko
> >> --
> >> Hinko KoÄevar, OSS developer
> >> ÄETRTA POT, d.o.o.
> >> Planina 3, 4000 Kranj, SI EU
> >> tel ++386 (0) 4 280 66 03
> >> e-mail hinko.kocevar@cetrtapot.si
> >> http www.cetrtapot.si
> >>
> >>
> >> -------------------------------------------------------------------------
> >> This SF.Net email is sponsored by the Moblin Your Move Developer's
> >> challenge
> >> Build the coolest Linux based applications with Moblin SDK & win great
> >> prizes
> >> Grand prize is a trip for two to an Open Source event anywhere in the
> >> world
> >> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> >> _______________________________________________
> >> Linux-fbdev-devel mailing list
> >> Linux-fbdev-devel@lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
> >
> >
> > --
> > Kristoffer Ericson <kristoffer.ericson@gmail.com>
> >
>
>
--
Kristoffer Ericson <kristoffer.ericson@gmail.com>
[-- Attachment #1.2: Type: application/pgp-signature, Size: 197 bytes --]
[-- Attachment #2: Type: text/plain, Size: 363 bytes --]
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
[-- Attachment #3: Type: text/plain, Size: 182 bytes --]
_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
next prev parent reply other threads:[~2008-11-11 18:14 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-11 1:54 Seg fault on any FB write (Epson S1D13A04 on Coldfire running 2.6.25) James Kimble
2008-11-11 9:57 ` Hinko Kocevar
2008-11-11 14:50 ` Seg fault on any FB write (Epson S1D13A04on " jkimble
2008-11-11 15:04 ` Hinko Kocevar
2008-11-11 16:10 ` Seg fault on any FB write (Epson S1D13A04onColdfire " jkimble
2008-11-12 8:25 ` Hinko Kocevar
2008-11-12 15:52 ` jkimble
2008-11-13 4:47 ` James Kimble
2008-11-13 8:50 ` Hinko Kocevar
2008-11-13 11:55 ` Kristoffer Ericson
2008-11-11 18:52 ` Seg fault on any FB write (Epson S1D13A04on Coldfire " Kristoffer Ericson
2008-11-11 18:02 ` Seg fault on any FB write (Epson S1D13A04onColdfire " jkimble
2008-11-11 19:14 ` Kristoffer Ericson [this message]
2008-11-11 18:20 ` jkimble
2008-11-11 19:29 ` Kristoffer Ericson
2008-11-12 8:34 ` Seg fault on any FB write (Epson S1D13A04on Coldfire " Hinko Kocevar
2008-11-11 15:06 ` jkimble
2008-11-11 18:50 ` Seg fault on any FB write (Epson S1D13A04 on " Kristoffer Ericson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081111201406.7c1babfb.kristoffer.ericson@gmail.com \
--to=kristoffer.ericson@gmail.com \
--cc=jkimble@one.net \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).