From mboxrd@z Thu Jan 1 00:00:00 1970 From: Magnus Damm Subject: [PATCH] sh_mobile_lcdc: use FB_SYS helpers instead of FB_CFB Date: Wed, 17 Dec 2008 17:29:49 +0900 Message-ID: <20081217082949.30120.83664.sendpatchset@rx1.opensource.se> Return-path: Sender: linux-sh-owner@vger.kernel.org List-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-fbdev-devel@lists.sourceforge.net Cc: Magnus Damm , lethal@linux-sh.org, linux-sh@vger.kernel.org From: Magnus Damm Since the sh_mobile_lcdc hardware has the framebuffer(s) in system RAM, use FB_SYS instead of FB_CFB. Also hook in read and write helpers. Signed-off-by: Magnus Damm --- drivers/video/Kconfig | 8 ++++---- drivers/video/sh_mobile_lcdcfb.c | 8 +++++--- 2 files changed, 9 insertions(+), 7 deletions(-) --- 0001/drivers/video/Kconfig +++ work/drivers/video/Kconfig 2008-12-17 14:02:59.000000000 +0900 @@ -1889,10 +1889,10 @@ config FB_W100 config FB_SH_MOBILE_LCDC tristate "SuperH Mobile LCDC framebuffer support" depends on FB && SUPERH - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - default m + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS ---help--- Frame buffer driver for the on-chip SH-Mobile LCD controller. --- 0001/drivers/video/sh_mobile_lcdcfb.c +++ work/drivers/video/sh_mobile_lcdcfb.c 2008-12-17 14:04:56.000000000 +0900 @@ -499,9 +499,11 @@ static struct fb_fix_screeninfo sh_mobil static struct fb_ops sh_mobile_lcdc_ops = { .fb_setcolreg = sh_mobile_lcdc_setcolreg, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, + .fb_read = fb_sys_read, + .fb_write = fb_sys_write, + .fb_fillrect = sys_fillrect, + .fb_copyarea = sys_copyarea, + .fb_imageblit = sys_imageblit, }; static int sh_mobile_lcdc_set_bpp(struct fb_var_screeninfo *var, int bpp)