From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Michael Schmitz <schmitz@opal.biophys.uni-duesseldorf.de>,
linux-fbdev-devel@lists.sourceforge.net
Cc: linux-m68k@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [patch 2/6] fbdev: atafb - Fix 16 bpp console
Date: Sun, 21 Dec 2008 16:01:01 +0100 [thread overview]
Message-ID: <20081221150122.191178920@mail.of.borg> (raw)
In-Reply-To: 20081221150059.844577615@mail.of.borg
[-- Attachment #1: atafb-16bpp.diff --]
[-- Type: text/plain, Size: 4259 bytes --]
- 16 bpp must use the cfb_*() ops
- 16 bpp needs to set up info->pseudo_palette[] (was fbcon_cfb16_cmap[] in
2.4.x)
- Kill commented out 2.4.x fbcon remnants
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
drivers/video/atafb.c | 74 ++++++++++++++++++++------------------------------
1 file changed, 30 insertions(+), 44 deletions(-)
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -149,6 +149,7 @@ static struct atafb_par {
short mono;
short ste_mode;
short bpp;
+ u32 pseudo_palette[16];
} falcon;
#endif
/* Nothing needed for external mode */
@@ -885,10 +886,6 @@ static int vdl_prescale[4][3] = {
/* Default hsync timing [mon_type] in picoseconds */
static long h_syncs[4] = { 3000000, 4875000, 4000000, 4875000 };
-#ifdef FBCON_HAS_CFB16
-static u16 fbcon_cfb16_cmap[16];
-#endif
-
static inline int hxx_prescale(struct falcon_hw *hw)
{
return hw->ste_mode ? 16
@@ -1736,10 +1733,10 @@ static int falcon_setcolreg(unsigned int
(((red & 0xe000) >> 13) | ((red & 0x1000) >> 12) << 8) |
(((green & 0xe000) >> 13) | ((green & 0x1000) >> 12) << 4) |
((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12);
-#ifdef FBCON_HAS_CFB16
- fbcon_cfb16_cmap[regno] = ((red & 0xf800) |
- ((green & 0xfc00) >> 5) |
- ((blue & 0xf800) >> 11));
+#ifdef ATAFB_FALCON
+ ((u32 *)info->pseudo_palette)[regno] = ((red & 0xf800) |
+ ((green & 0xfc00) >> 5) |
+ ((blue & 0xf800) >> 11));
#endif
}
return 0;
@@ -2447,42 +2444,6 @@ static void atafb_set_disp(struct fb_inf
atafb_get_fix(&info->fix, info);
info->screen_base = (void *)info->fix.smem_start;
-
- switch (info->fix.type) {
- case FB_TYPE_INTERLEAVED_PLANES:
- switch (info->var.bits_per_pixel) {
- case 2:
- // display->dispsw = &fbcon_iplan2p2;
- break;
- case 4:
- // display->dispsw = &fbcon_iplan2p4;
- break;
- case 8:
- // display->dispsw = &fbcon_iplan2p8;
- break;
- }
- break;
- case FB_TYPE_PACKED_PIXELS:
- switch (info->var.bits_per_pixel) {
-#ifdef FBCON_HAS_MFB
- case 1:
- // display->dispsw = &fbcon_mfb;
- break;
-#endif
-#ifdef FBCON_HAS_CFB8
- case 8:
- // display->dispsw = &fbcon_cfb8;
- break;
-#endif
-#ifdef FBCON_HAS_CFB16
- case 16:
- // display->dispsw = &fbcon_cfb16;
- // display->dispsw_data = fbcon_cfb16_cmap;
- break;
-#endif
- }
- break;
- }
}
static int atafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
@@ -2553,6 +2514,13 @@ static void atafb_fillrect(struct fb_inf
if (!rect->width || !rect->height)
return;
+#ifdef ATAFB_FALCON
+ if (info->var.bits_per_pixel == 16) {
+ cfb_fillrect(info, rect);
+ return;
+ }
+#endif
+
/*
* We could use hardware clipping but on many cards you get around
* hardware clipping by writing to framebuffer directly.
@@ -2587,6 +2555,13 @@ static void atafb_copyarea(struct fb_inf
u32 dx, dy, sx, sy, width, height;
int rev_copy = 0;
+#ifdef ATAFB_FALCON
+ if (info->var.bits_per_pixel == 16) {
+ cfb_copyarea(info, area);
+ return;
+ }
+#endif
+
/* clip the destination */
x2 = area->dx + area->width;
y2 = area->dy + area->height;
@@ -2636,6 +2611,13 @@ static void atafb_imageblit(struct fb_in
const char *src;
u32 dx, dy, width, height, pitch;
+#ifdef ATAFB_FALCON
+ if (info->var.bits_per_pixel == 16) {
+ cfb_imageblit(info, image);
+ return;
+ }
+#endif
+
/*
* We could use hardware clipping but on many cards you get around
* hardware clipping by writing to framebuffer directly like we are
@@ -3229,6 +3211,10 @@ int __init atafb_init(void)
// tries to read from HW which may not be initialized yet
// so set sane var first, then call atafb_set_par
atafb_get_var(&fb_info.var, &fb_info);
+
+#ifdef ATAFB_FALCON
+ fb_info.pseudo_palette = current_par.hw.falcon.pseudo_palette;
+#endif
fb_info.flags = FBINFO_FLAG_DEFAULT;
if (!fb_find_mode(&fb_info.var, &fb_info, mode_option, atafb_modedb,
--
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2008-12-21 15:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-21 15:00 [patch 0/6] [patch 0/6] Atari frame buffer fixes Geert Uytterhoeven
2008-12-21 15:01 ` [patch 1/6] fbdev: atafb - Fix line length handling Geert Uytterhoeven
2008-12-21 15:01 ` Geert Uytterhoeven [this message]
2008-12-21 15:01 ` [patch 3/6] fbdev: c2p - Cleanups Geert Uytterhoeven
2008-12-22 23:22 ` Andrew Morton
2008-12-23 8:13 ` Geert Uytterhoeven
2008-12-21 15:01 ` [patch 4/6] fbdev: c2p - Extract common c2p core to c2p_core.h Geert Uytterhoeven
2008-12-21 15:01 ` [patch 5/6] fbdev: c2p/atafb - Add support for Atari interleaved bitplanes Geert Uytterhoeven
2008-12-21 15:01 ` [patch 6/6] fbdev: c2p - Rename c2p to c2p_planar and correct indentation Geert Uytterhoeven
2008-12-22 23:23 ` Andrew Morton
2008-12-23 8:02 ` Geert Uytterhoeven
2008-12-22 23:24 ` [patch 0/6] [patch 0/6] Atari frame buffer fixes Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081221150122.191178920@mail.of.borg \
--to=geert@linux-m68k.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=schmitz@opal.biophys.uni-duesseldorf.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).