From: Harald Welte <HaraldWelte@viatech.com>
To: linux-fbdev-devel@lists.sourceforge.net
Cc: JosephChan@via.com.tw, ScottFang@viatech.com.cn
Subject: [PATCH 1/2] viafb: make viafb a first-class citizen using pci_driver
Date: Tue, 19 May 2009 16:34:18 +0800 [thread overview]
Message-ID: <20090519083418.GH19746@prithivi.gnumonks.org> (raw)
This patch modifies the viafb driver to use the normal 'struct pci_driver'
method for registering a PCI driver with the Linux kernel.
---
drivers/video/via/hw.c | 116 +++--------------------------------------
drivers/video/via/hw.h | 7 +--
drivers/video/via/viafbdev.c | 65 ++++++++++++++++++++---
3 files changed, 68 insertions(+), 120 deletions(-)
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index b111b6c..6306c88 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -21,22 +21,6 @@
#include "global.h"
-static const struct pci_device_id_info pciidlist[] = {
- {PCI_VIA_VENDOR_ID, UNICHROME_CLE266_DID, UNICHROME_CLE266},
- {PCI_VIA_VENDOR_ID, UNICHROME_PM800_DID, UNICHROME_PM800},
- {PCI_VIA_VENDOR_ID, UNICHROME_K400_DID, UNICHROME_K400},
- {PCI_VIA_VENDOR_ID, UNICHROME_K800_DID, UNICHROME_K800},
- {PCI_VIA_VENDOR_ID, UNICHROME_CN700_DID, UNICHROME_CN700},
- {PCI_VIA_VENDOR_ID, UNICHROME_P4M890_DID, UNICHROME_P4M890},
- {PCI_VIA_VENDOR_ID, UNICHROME_K8M890_DID, UNICHROME_K8M890},
- {PCI_VIA_VENDOR_ID, UNICHROME_CX700_DID, UNICHROME_CX700},
- {PCI_VIA_VENDOR_ID, UNICHROME_P4M900_DID, UNICHROME_P4M900},
- {PCI_VIA_VENDOR_ID, UNICHROME_CN750_DID, UNICHROME_CN750},
- {PCI_VIA_VENDOR_ID, UNICHROME_VX800_DID, UNICHROME_VX800},
- {PCI_VIA_VENDOR_ID, UNICHROME_VX855_DID, UNICHROME_VX855},
- {0, 0, 0}
-};
-
struct offset offset_reg = {
/* IGA1 Offset Register */
{IGA1_OFFSET_REG_NUM, {{CR13, 0, 7}, {CR35, 5, 7} } },
@@ -549,7 +533,8 @@ static void set_dvi_output_path(int set_iga, int output_interface);
static void set_lcd_output_path(int set_iga, int output_interface);
static int search_mode_setting(int ModeInfoIndex);
static void load_fix_bit_crtc_reg(void);
-static void init_gfx_chip_info(void);
+static void init_gfx_chip_info(struct pci_dev *pdev,
+ const struct pci_device_id *pdi);
static void init_tmds_chip_info(void);
static void init_lvds_chip_info(void);
static void device_screen_off(void);
@@ -559,7 +544,6 @@ static void device_off(void);
static void device_on(void);
static void enable_second_display_channel(void);
static void disable_second_display_channel(void);
-static int get_fb_size_from_pci(void);
void viafb_write_reg(u8 index, u16 io_port, u8 data)
{
@@ -1996,9 +1980,10 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
}
-void viafb_init_chip_info(void)
+void viafb_init_chip_info(struct pci_dev *pdev,
+ const struct pci_device_id *pdi)
{
- init_gfx_chip_info();
+ init_gfx_chip_info(pdev, pdi);
init_tmds_chip_info();
init_lvds_chip_info();
@@ -2071,24 +2056,12 @@ void viafb_update_device_setting(int hres, int vres,
}
}
-static void init_gfx_chip_info(void)
+static void init_gfx_chip_info(struct pci_dev *pdev,
+ const struct pci_device_id *pdi)
{
- struct pci_dev *pdev = NULL;
- u32 i;
u8 tmp;
- /* Indentify GFX Chip Name */
- for (i = 0; pciidlist[i].vendor != 0; i++) {
- pdev = pci_get_device(pciidlist[i].vendor,
- pciidlist[i].device, 0);
- if (pdev)
- break;
- }
-
- if (!pciidlist[i].vendor)
- return ;
-
- viaparinfo->chip_info->gfx_chip_name = pciidlist[i].chip_index;
+ viaparinfo->chip_info->gfx_chip_name = pdi->driver_data;
/* Check revision of CLE266 Chip */
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) {
@@ -2119,8 +2092,6 @@ static void init_gfx_chip_info(void)
CX700_REVISION_700;
}
}
-
- pci_dev_put(pdev);
}
static void init_tmds_chip_info(void)
@@ -2612,38 +2583,6 @@ void viafb_crt_enable(void)
viafb_write_reg_mask(CR36, VIACR, 0x0, BIT5 + BIT4);
}
-void viafb_get_mmio_info(unsigned long *mmio_base,
- unsigned long *mmio_len)
-{
- struct pci_dev *pdev = NULL;
- u32 vendor, device;
- u32 i;
-
- for (i = 0; pciidlist[i].vendor != 0; i++)
- if (viaparinfo->chip_info->gfx_chip_name ==
- pciidlist[i].chip_index)
- break;
-
- if (!pciidlist[i].vendor)
- return ;
-
- vendor = pciidlist[i].vendor;
- device = pciidlist[i].device;
-
- pdev = pci_get_device(vendor, device, NULL);
-
- if (!pdev) {
- *mmio_base = 0;
- *mmio_len = 0;
- return ;
- }
-
- *mmio_base = pci_resource_start(pdev, 1);
- *mmio_len = pci_resource_len(pdev, 1);
-
- pci_dev_put(pdev);
-}
-
static void enable_second_display_channel(void)
{
/* to enable second display channel. */
@@ -2660,44 +2599,7 @@ static void disable_second_display_channel(void)
viafb_write_reg_mask(CR6A, VIACR, BIT6, BIT6);
}
-void viafb_get_fb_info(unsigned int *fb_base, unsigned int *fb_len)
-{
- struct pci_dev *pdev = NULL;
- u32 vendor, device;
- u32 i;
-
- for (i = 0; pciidlist[i].vendor != 0; i++)
- if (viaparinfo->chip_info->gfx_chip_name ==
- pciidlist[i].chip_index)
- break;
-
- if (!pciidlist[i].vendor)
- return ;
-
- vendor = pciidlist[i].vendor;
- device = pciidlist[i].device;
-
- pdev = pci_get_device(vendor, device, NULL);
-
- if (!pdev) {
- *fb_base = viafb_read_reg(VIASR, SR30) << 24;
- *fb_len = viafb_get_memsize();
- DEBUG_MSG(KERN_INFO "Get FB info from SR30!\n");
- DEBUG_MSG(KERN_INFO "fb_base = %08x\n", *fb_base);
- DEBUG_MSG(KERN_INFO "fb_len = %08x\n", *fb_len);
- return ;
- }
-
- *fb_base = (unsigned int)pci_resource_start(pdev, 0);
- *fb_len = get_fb_size_from_pci();
- DEBUG_MSG(KERN_INFO "Get FB info from PCI system!\n");
- DEBUG_MSG(KERN_INFO "fb_base = %08x\n", *fb_base);
- DEBUG_MSG(KERN_INFO "fb_len = %08x\n", *fb_len);
-
- pci_dev_put(pdev);
-}
-
-static int get_fb_size_from_pci(void)
+int viafb_get_fb_size_from_pci(void)
{
unsigned long configid, deviceid, FBSize = 0;
int VideoMemSize;
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index 22786a5..1cd0648 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -931,17 +931,16 @@ void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
int viafb_setmode(int vmode_index, int hor_res, int ver_res,
int video_bpp, int vmode_index1, int hor_res1,
int ver_res1, int video_bpp1);
-void viafb_init_chip_info(void);
+void viafb_init_chip_info(struct pci_dev *pdev,
+ const struct pci_device_id *pdi);
void viafb_init_dac(int set_iga);
int viafb_get_pixclock(int hres, int vres, int vmode_refresh);
int viafb_get_refresh(int hres, int vres, u32 float_refresh);
void viafb_update_device_setting(int hres, int vres, int bpp,
int vmode_refresh, int flag);
-void viafb_get_mmio_info(unsigned long *mmio_base,
- unsigned long *mmio_len);
+int viafb_get_fb_size_from_pci(void);
void viafb_set_iga_path(void);
void viafb_set_start_addr(void);
-void viafb_get_fb_info(unsigned int *fb_base, unsigned int *fb_len);
#endif /* __HW_H__ */
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 055d67d..32c26cc 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -2104,7 +2104,8 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry)
remove_proc_entry("viafb", NULL);
}
-static int __devinit via_pci_probe(void)
+static int __devinit via_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
unsigned long default_xres, default_yres;
char *tmpc, *tmpm;
@@ -2128,7 +2128,8 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
* variables
*/
viafbinfo = framebuffer_alloc(viafb_par_length + 2 * lvds_length +
- tmds_length + crt_length + chip_length, NULL);
+ tmds_length + crt_length + chip_length,
+ &pdev->dev);
if (!viafbinfo) {
printk(KERN_ERR"Could not allocate memory for viafb_info.\n");
return -ENOMEM;
@@ -2161,8 +2162,9 @@ static int __devinit via_pci_probe(void)
if (rc)
goto out_fb_release;
- viafb_init_chip_info();
- viafb_get_fb_info(&viaparinfo->fbmem, &viaparinfo->memsize);
+ viafb_init_chip_info(pdev, ent);
+ viaparinfo->fbmem = pci_resource_start(pdev, 0);
+ viaparinfo->memsize = viafb_get_fb_size_from_pci();
viaparinfo->fbmem_free = viaparinfo->memsize;
viaparinfo->fbmem_used = 0;
viaparinfo->fbmem_virt = ioremap_nocache(viaparinfo->fbmem,
@@ -2170,14 +2172,20 @@ static int __devinit via_pci_probe(void)
viafbinfo->screen_base = (char *)viaparinfo->fbmem_virt;
if (!viaparinfo->fbmem_virt) {
- printk(KERN_INFO "ioremap failed\n");
+ printk(KERN_ERR "ioremap of fbmem failed\n");
rc = -EIO;
goto out_delete_i2c;
}
- viafb_get_mmio_info(&viaparinfo->mmio_base, &viaparinfo->mmio_len);
+ viaparinfo->mmio_base = pci_resource_start(pdev, 1);
+ viaparinfo->mmio_len = pci_resource_len(pdev, 1);
viaparinfo->io_virt = ioremap_nocache(viaparinfo->mmio_base,
viaparinfo->mmio_len);
+ if (!viaparinfo->io_virt) {
+ printk(KERN_ERR "ioremap of MMIO failed\n");
+ rc = -EIO;
+ goto out_unmap_fbmem;
+ }
viafbinfo->node = 0;
viafbinfo->fbops = &viafb_ops;
@@ -2285,7 +2293,8 @@ static int __devinit via_pci_probe(void)
printk(KERN_ERR
"allocate the second framebuffer struct error\n");
framebuffer_release(viafbinfo);
- goto out_delete_i2c;
+ rc = -ENOMEM;
+ goto out_unmap_mmio;
}
viaparinfo1 = viafbinfo1->par;
memcpy(viaparinfo1, viaparinfo, viafb_par_length);
@@ -2386,6 +2395,10 @@ out_dealloc_cmap:
out_fb1_release:
if (viafbinfo1)
framebuffer_release(viafbinfo1);
+out_unmap_mmio:
+ iounmap(viaparinfo->io_virt);
+out_unmap_fbmem:
+ iounmap((void *)viaparinfo->fbmem_virt);
out_delete_i2c:
viafb_delete_i2c_buss(viaparinfo);
out_fb_release:
@@ -2393,7 +2406,7 @@ out_fb_release:
return rc;
}
-static void __devexit via_pci_remove(void)
+static void __devexit via_pci_remove(struct pci_dev *pdev)
{
DEBUG_MSG(KERN_INFO "via_pci_remove!\n");
fb_dealloc_cmap(&viafbinfo->cmap);
@@ -2487,6 +2500,40 @@ static int __init viafb_setup(char *options)
}
#endif
+static struct pci_device_id viafb_pci_table[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CLE266_DID),
+ .driver_data = UNICHROME_CLE266 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID),
+ .driver_data = UNICHROME_PM800 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K400_DID),
+ .driver_data = UNICHROME_K400 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K800_DID),
+ .driver_data = UNICHROME_K800 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID),
+ .driver_data = UNICHROME_CN700 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID),
+ .driver_data = UNICHROME_K8M890 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CX700_DID),
+ .driver_data = UNICHROME_CX700 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID),
+ .driver_data = UNICHROME_P4M900 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN750_DID),
+ .driver_data = UNICHROME_CN750 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX800_DID),
+ .driver_data = UNICHROME_VX800 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX855_DID),
+ .driver_data = UNICHROME_VX855 },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, viafb_pci_table);
+
+static struct pci_driver viafb_driver = {
+ .name = "viafb",
+ .id_table = viafb_pci_table,
+ .probe = via_pci_probe,
+ .remove = __devexit_p(via_pci_remove),
+};
+
static int __init viafb_init(void)
{
#ifndef MODULE
@@ -2498,13 +2545,13 @@ static int __init viafb_init(void)
printk(KERN_INFO
"VIA Graphics Intergration Chipset framebuffer %d.%d initializing\n",
VERSION_MAJOR, VERSION_MINOR);
- return via_pci_probe();
+ return pci_register_driver(&viafb_driver);
}
static void __exit viafb_exit(void)
{
DEBUG_MSG(KERN_INFO "viafb_exit!\n");
- via_pci_remove();
+ pci_unregister_driver(&viafb_driver);
}
static struct fb_ops viafb_ops = {
--
1.6.2.4
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables
unlimited royalty-free distribution of the report engine
for externally facing server and web deployment.
http://p.sf.net/sfu/businessobjects
next reply other threads:[~2009-05-19 8:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-19 8:34 Harald Welte [this message]
2009-05-19 21:16 ` [PATCH 1/2] viafb: make viafb a first-class citizen using pci_driver Krzysztof Helt
2009-05-20 1:45 ` Harald Welte
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090519083418.GH19746@prithivi.gnumonks.org \
--to=haraldwelte@viatech.com \
--cc=JosephChan@via.com.tw \
--cc=ScottFang@viatech.com.cn \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).