[PATCH] video: add PXA3xx accelerator ID [v2]

[PATCH] video: add PXA3xx accelerator ID [v2]

[Daniel Mack]

Ok, here goes a new patch as just discussed.
Does that look good to everyone?

Thanks,
Daniel

From 32b1fa824cd78f9ba6169b90c5d01870de05c86f Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 20 Jul 2009 11:18:43 +0200
Subject: [PATCH] video: add PXA3xx accelerator ID

Add ID 99 for PXA3xx frame buffers and report it in the pxa frame buffer
conditionally, depending on a new flag in struct pxafb_mach_info.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: linux-fbdev-devel@lists.sourceforge.net
Cc: Dennis Oliver Kropp <dok@directfb.org>
Cc: Sven Neumann <s.neumann@raumfeld.com>
---
 arch/arm/mach-pxa/include/mach/pxafb.h |    3 ++-
 drivers/video/pxafb.c                  |    3 +++
 include/linux/fb.h                     |    1 +
 3 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 6932720..f73061c 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -118,7 +118,8 @@ struct pxafb_mach_info {
 	u_int		fixed_modes:1,
 			cmap_inverse:1,
 			cmap_static:1,
-			unused:29;
+			acceleration_enabled:1,
+			unused:28;
 
 	/* The following should be defined in LCCR0
 	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 3951cc5..b65cc2d 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -2083,6 +2083,9 @@ static int __devinit pxafb_probe(struct platform_device *dev)
 		goto failed;
 	}
 
+	if (cpu_is_pxa3xx() && inf->acceleration_enabled)
+		fbi->fb.fix.accel = FB_ACCEL_PXA3XX;
+
 	fbi->backlight_power = inf->pxafb_backlight_power;
 	fbi->lcd_power = inf->pxafb_lcd_power;
 
diff --git a/include/linux/fb.h b/include/linux/fb.h
index f847df9..a34bdf5 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -133,6 +133,7 @@ struct dentry;
 #define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
 #define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
 #define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
+#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
 
 #define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
 #define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
-- 
1.6.3.3

Re: [PATCH] video: add PXA3xx accelerator ID [v2]

[Guennadi Liakhovetski]

On Thu, 10 Sep 2009, Daniel Mack wrote:

> Ok, here goes a new patch as just discussed.
> Does that look good to everyone?
> 
> Thanks,
> Daniel
> 
> >From 32b1fa824cd78f9ba6169b90c5d01870de05c86f Mon Sep 17 00:00:00 2001
> From: Daniel Mack <daniel@caiaq.de>
> Date: Mon, 20 Jul 2009 11:18:43 +0200
> Subject: [PATCH] video: add PXA3xx accelerator ID
> 
> Add ID 99 for PXA3xx frame buffers and report it in the pxa frame buffer
> conditionally, depending on a new flag in struct pxafb_mach_info.
> 
> Signed-off-by: Daniel Mack <daniel@caiaq.de>
> Cc: Eric Miao <eric.miao@marvell.com>
> Cc: linux-fbdev-devel@lists.sourceforge.net
> Cc: Dennis Oliver Kropp <dok@directfb.org>
> Cc: Sven Neumann <s.neumann@raumfeld.com>
> ---
>  arch/arm/mach-pxa/include/mach/pxafb.h |    3 ++-
>  drivers/video/pxafb.c                  |    3 +++
>  include/linux/fb.h                     |    1 +
>  3 files changed, 6 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
> index 6932720..f73061c 100644
> --- a/arch/arm/mach-pxa/include/mach/pxafb.h
> +++ b/arch/arm/mach-pxa/include/mach/pxafb.h
> @@ -118,7 +118,8 @@ struct pxafb_mach_info {
>  	u_int		fixed_modes:1,
>  			cmap_inverse:1,
>  			cmap_static:1,
> -			unused:29;
> +			acceleration_enabled:1,
> +			unused:28;
>  
>  	/* The following should be defined in LCCR0
>  	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
> diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
> index 3951cc5..b65cc2d 100644
> --- a/drivers/video/pxafb.c
> +++ b/drivers/video/pxafb.c
> @@ -2083,6 +2083,9 @@ static int __devinit pxafb_probe(struct platform_device *dev)
>  		goto failed;
>  	}
>  
> +	if (cpu_is_pxa3xx() && inf->acceleration_enabled)
> +		fbi->fb.fix.accel = FB_ACCEL_PXA3XX;
> +

Ok, now remove 'cpu_is_pxa3xx() && ' above and you should be good to go:-) 
What if tomorrow pxa4xx comes (ok, Eric will disagree, but wtill:-))

>  	fbi->backlight_power = inf->pxafb_backlight_power;
>  	fbi->lcd_power = inf->pxafb_lcd_power;
>  
> diff --git a/include/linux/fb.h b/include/linux/fb.h
> index f847df9..a34bdf5 100644
> --- a/include/linux/fb.h
> +++ b/include/linux/fb.h
> @@ -133,6 +133,7 @@ struct dentry;
>  #define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
>  #define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
>  #define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
> +#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
>  
>  #define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
>  #define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
> -- 
> 1.6.3.3
> 

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/

Re: [PATCH] video: add PXA3xx accelerator ID [v2]

[Daniel Mack]

On Thu, Sep 10, 2009 at 03:31:34PM +0200, Guennadi Liakhovetski wrote:
> > +	if (cpu_is_pxa3xx() && inf->acceleration_enabled)
> > +		fbi->fb.fix.accel = FB_ACCEL_PXA3XX;
> > +
> 
> Ok, now remove 'cpu_is_pxa3xx() && ' above and you should be good to go:-) 
> What if tomorrow pxa4xx comes (ok, Eric will disagree, but wtill:-))

Don't know. I left it in there intentionally, but I'm fine to remove it.
Or Eric does it when applying ;) Eric?

Daniel

Re: [PATCH] video: add PXA3xx accelerator ID [v2]

[Daniel Mack]

On Thu, Sep 10, 2009 at 03:33:27PM +0200, Daniel Mack wrote:
> On Thu, Sep 10, 2009 at 03:31:34PM +0200, Guennadi Liakhovetski wrote:
> > > +	if (cpu_is_pxa3xx() && inf->acceleration_enabled)
> > > +		fbi->fb.fix.accel = FB_ACCEL_PXA3XX;
> > > +
> > 
> > Ok, now remove 'cpu_is_pxa3xx() && ' above and you should be good to go:-) 
> > What if tomorrow pxa4xx comes (ok, Eric will disagree, but wtill:-))
> 
> Don't know. I left it in there intentionally, but I'm fine to remove it.
> Or Eric does it when applying ;) Eric?

What I was considering are cases where a kernel binary that works on
both PXA3xx and other PXAs shares the same pxafb_mach_info struct across
different board support code. The accel flag would then be set for wrong
platforms.

But this might be academic, that's why I don't have a strong opinion on
that :)

Daniel


------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july

Re: [PATCH] video: add PXA3xx accelerator ID [v2]

[Eric Miao]

> Ok, now remove 'cpu_is_pxa3xx() && ' above and you should be good to go:-)
> What if tomorrow pxa4xx comes (ok, Eric will disagree, but wtill:-))

It is not likely to be pxa4xx, (chinese people don't like '4', and there are
a lot chinese in Marvell, Shhh..... don't let them know I said this ;-)

Still, I guess having a cpu_is_pxa3xx() should be OK here.

>
>>       fbi->backlight_power = inf->pxafb_backlight_power;
>>       fbi->lcd_power = inf->pxafb_lcd_power;
>>
>> diff --git a/include/linux/fb.h b/include/linux/fb.h
>> index f847df9..a34bdf5 100644
>> --- a/include/linux/fb.h
>> +++ b/include/linux/fb.h
>> @@ -133,6 +133,7 @@ struct dentry;
>>  #define FB_ACCEL_NEOMAGIC_NM2230 96  /* NeoMagic NM2230              */
>>  #define FB_ACCEL_NEOMAGIC_NM2360 97  /* NeoMagic NM2360              */
>>  #define FB_ACCEL_NEOMAGIC_NM2380 98  /* NeoMagic NM2380              */
>> +#define FB_ACCEL_PXA3XX               99     /* PXA3xx                       */
>>
>>  #define FB_ACCEL_SAVAGE4        0x80 /* S3 Savage4                   */
>>  #define FB_ACCEL_SAVAGE3D       0x81 /* S3 Savage3D                  */
>> --
>> 1.6.3.3
>>
>
> Thanks
> Guennadi
> ---
> Guennadi Liakhovetski, Ph.D.
> Freelance Open-Source Software Developer
> http://www.open-technology.de/
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel