Re: [PATCH] mx3fb: Fix parameter to sdc_init_panel

[Alexander Stein <alexander.stein@systec-electronic.com>]

On Thursday 10 February 2011, 14:01:17 Alexander Stein wrote:
> On Thursday 10 February 2011, 13:48:23 Guennadi Liakhovetski wrote:
> > > I don't know which display you used, but I guess your right_margin (and
> > > lower_margin) needs to be adjusted.
> > 
> > Ok, agree. But then you need to adjust all current users and have them
> > tested... Otherwise, of course, you can just adjust your platform panel
> > data to work with the current calculations, even though in principle your
> > patch seems to be doing the right thing (tm), according to the manual.
> > But if applied as is without fixing all the users, it can very well
> > break them...
> 
> Ok, I've just seen there are some model defines in mx3fb.c which would also
> be affected.
> I'll try to find all mx3fb users and fix their videomodes and repost a new
> patch.

Uh, this seems next to impossible for me to handle it my own. I checked some 
users of the mx3fb but I cant say which ones will be affected and which ones 
not (e.g. without any hsync/vsync, on data enable).
I've not idea how to fix it then.

Alexander