From: Marek Vasut <marek.vasut@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management
Date: Fri, 11 Mar 2011 21:34:10 +0000 [thread overview]
Message-ID: <201103112234.10904.marek.vasut@gmail.com> (raw)
In-Reply-To: <1299835250-11095-1-git-send-email-anarsoul@gmail.com>
On Friday 11 March 2011 10:20:47 Vasily Khoruzhick wrote:
> PXAFB overlay memory management is something messy:
> - it allocates memory dynamically on open/release, and it results
> in memory allocation failure after ~1h of uptime (system does not have
> 115k of physically contiguous memory)
> - in release callback it tries to free memory even if it was not
> allocated.
>
> Also driver touches FDADR1 on main plane reconfiguration, and it can cause
> problems if overlay1 is enabled.
>
> This patch attempts to fix those issues.
>
> Patch is based on Russell King's work.
>
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> ---
> drivers/video/pxafb.c | 121
> ++++++++++++++++++++++++++++++++----------------- drivers/video/pxafb.h |
> 3 +-
> 2 files changed, 81 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
> index 825b665..0764759 100644
> --- a/drivers/video/pxafb.c
> +++ b/drivers/video/pxafb.c
> @@ -627,7 +627,12 @@ static void overlay1fb_enable(struct pxafb_layer *ofb)
>
> static void overlay1fb_disable(struct pxafb_layer *ofb)
> {
> - uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
> + uint32_t lccr5;
> +
> + if (!(lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN))
> + return;
> +
> + lccr5 = lcd_readl(ofb->fbi, LCCR5);
>
> lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] & ~OVLxC1_OEN);
>
> @@ -685,7 +690,12 @@ static void overlay2fb_enable(struct pxafb_layer *ofb)
>
> static void overlay2fb_disable(struct pxafb_layer *ofb)
> {
> - uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
> + uint32_t lccr5;
> +
> + if (!(lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN))
> + return;
> +
> + lccr5 = lcd_readl(ofb->fbi, LCCR5);
>
> lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] & ~OVLxC1_OEN);
>
> @@ -720,12 +730,10 @@ static int overlayfb_open(struct fb_info *info, int
> user) if (user = 0)
> return -ENODEV;
>
> - /* allow only one user at a time */
> - if (atomic_inc_and_test(&ofb->usage))
> - return -EBUSY;
> + if (ofb->usage++ = 0)
TBH I don't like this notation, it feels hard to read. Can you split that ofb-
>usage++ into two parts ?
Cheers
> + /* unblank the base framebuffer */
> + fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
>
> - /* unblank the base framebuffer */
> - fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
> return 0;
> }
>
> @@ -733,12 +741,15 @@ static int overlayfb_release(struct fb_info *info,
> int user) {
> struct pxafb_layer *ofb = (struct pxafb_layer*) info;
>
> - atomic_dec(&ofb->usage);
> - ofb->ops->disable(ofb);
> + if (ofb->usage = 1) {
> + ofb->ops->disable(ofb);
> + ofb->fb.var.height = -1;
> + ofb->fb.var.width = -1;
> + ofb->fb.var.xres = ofb->fb.var.xres_virtual = 0;
> + ofb->fb.var.yres = ofb->fb.var.yres_virtual = 0;
>
> - free_pages_exact(ofb->video_mem, ofb->video_mem_size);
> - ofb->video_mem = NULL;
> - ofb->video_mem_size = 0;
> + ofb->usage--;
> + }
> return 0;
> }
>
> @@ -794,7 +805,7 @@ static int overlayfb_check_var(struct fb_var_screeninfo
> *var, return 0;
> }
>
> -static int overlayfb_map_video_memory(struct pxafb_layer *ofb)
> +static int overlayfb_check_video_memory(struct pxafb_layer *ofb)
> {
> struct fb_var_screeninfo *var = &ofb->fb.var;
> int pfor = NONSTD_TO_PFOR(var->nonstd);
> @@ -812,27 +823,11 @@ static int overlayfb_map_video_memory(struct
> pxafb_layer *ofb)
>
> size = PAGE_ALIGN(ofb->fb.fix.line_length * var->yres_virtual);
>
> - /* don't re-allocate if the original video memory is enough */
> if (ofb->video_mem) {
> if (ofb->video_mem_size >= size)
> return 0;
> -
> - free_pages_exact(ofb->video_mem, ofb->video_mem_size);
> }
> -
> - ofb->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
> - if (ofb->video_mem = NULL)
> - return -ENOMEM;
> -
> - ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
> - ofb->video_mem_size = size;
> -
> - mutex_lock(&ofb->fb.mm_lock);
> - ofb->fb.fix.smem_start = ofb->video_mem_phys;
> - ofb->fb.fix.smem_len = ofb->fb.fix.line_length * var->yres_virtual;
> - mutex_unlock(&ofb->fb.mm_lock);
> - ofb->fb.screen_base = ofb->video_mem;
> - return 0;
> + return -EINVAL;
> }
>
> static int overlayfb_set_par(struct fb_info *info)
> @@ -841,7 +836,7 @@ static int overlayfb_set_par(struct fb_info *info)
> struct fb_var_screeninfo *var = &info->var;
> int xpos, ypos, pfor, bpp, ret;
>
> - ret = overlayfb_map_video_memory(ofb);
> + ret = overlayfb_check_video_memory(ofb);
> if (ret)
> return ret;
>
> @@ -891,7 +886,7 @@ static void __devinit init_pxafb_overlay(struct
> pxafb_info *fbi,
>
> ofb->id = id;
> ofb->ops = &ofb_ops[id];
> - atomic_set(&ofb->usage, 0);
> + ofb->usage = 0;
> ofb->fbi = fbi;
> init_completion(&ofb->branch_done);
> }
> @@ -904,20 +899,54 @@ static inline int pxafb_overlay_supported(void)
> return 0;
> }
>
> -static int __devinit pxafb_overlay_init(struct pxafb_info *fbi)
> +static int __devinit pxafb_overlay_map_video_memory(struct pxafb_info
> *pxafb, + struct pxafb_layer *ofb)
> +{
> + /* We assume that user will use at most video_mem_size for overlay fb,
> + * anyway, it's useless to use 16bpp main plane and 24bpp overlay
> + */
> + ofb->video_mem = alloc_pages_exact(PAGE_ALIGN(pxafb->video_mem_size),
> + GFP_KERNEL | __GFP_ZERO);
> + if (ofb->video_mem = NULL)
> + return -ENOMEM;
> +
> + ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
> + ofb->video_mem_size = PAGE_ALIGN(pxafb->video_mem_size);
> +
> + mutex_lock(&ofb->fb.mm_lock);
> + ofb->fb.fix.smem_start = ofb->video_mem_phys;
> + ofb->fb.fix.smem_len = pxafb->video_mem_size;
> + mutex_unlock(&ofb->fb.mm_lock);
> +
> + ofb->fb.screen_base = ofb->video_mem;
> +
> + return 0;
> +}
> +
> +static void __devinit pxafb_overlay_init(struct pxafb_info *fbi)
> {
> int i, ret;
>
> if (!pxafb_overlay_supported())
> - return 0;
> + return;
>
> for (i = 0; i < 2; i++) {
> - init_pxafb_overlay(fbi, &fbi->overlay[i], i);
> - ret = register_framebuffer(&fbi->overlay[i].fb);
> + struct pxafb_layer *ofb = &fbi->overlay[i];
> + init_pxafb_overlay(fbi, ofb, i);
> + ret = register_framebuffer(&ofb->fb);
> if (ret) {
> dev_err(fbi->dev, "failed to register overlay %d\n", i);
> - return ret;
> + continue;
> + }
> + ret = pxafb_overlay_map_video_memory(fbi, ofb);
> + if (ret) {
> + dev_err(fbi->dev,
> + "failed to map video memory for overlay %d\n",
> + i);
> + unregister_framebuffer(&ofb->fb);
> + continue;
> }
> + ofb->registered = 1;
> }
>
> /* mask all IU/BS/EOF/SOF interrupts */
> @@ -926,7 +955,6 @@ static int __devinit pxafb_overlay_init(struct
> pxafb_info *fbi) /* place overlay(s) on top of base */
> fbi->lccr0 |= LCCR0_OUC;
> pr_info("PXA Overlay driver loaded successfully!\n");
> - return 0;
> }
>
> static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
> @@ -936,8 +964,15 @@ static void __devexit pxafb_overlay_exit(struct
> pxafb_info *fbi) if (!pxafb_overlay_supported())
> return;
>
> - for (i = 0; i < 2; i++)
> - unregister_framebuffer(&fbi->overlay[i].fb);
> + for (i = 0; i < 2; i++) {
> + struct pxafb_layer *ofb = &fbi->overlay[i];
> + if (ofb->registered) {
> + if (ofb->video_mem)
> + free_pages_exact(ofb->video_mem,
> + ofb->video_mem_size);
> + unregister_framebuffer(&ofb->fb);
> + }
> + }
> }
> #else
> static inline void pxafb_overlay_init(struct pxafb_info *fbi) {}
> @@ -1368,7 +1403,8 @@ static int pxafb_activate_var(struct
> fb_var_screeninfo *var, (lcd_readl(fbi, LCCR3) != fbi->reg_lccr3) ||
> (lcd_readl(fbi, LCCR4) != fbi->reg_lccr4) ||
> (lcd_readl(fbi, FDADR0) != fbi->fdadr[0]) ||
> - (lcd_readl(fbi, FDADR1) != fbi->fdadr[1]))
> + ((fbi->lccr0 & LCCR0_SDS) &&
> + (lcd_readl(fbi, FDADR1) != fbi->fdadr[1])))
> pxafb_schedule_work(fbi, C_REENABLE);
>
> return 0;
> @@ -1420,7 +1456,8 @@ static void pxafb_enable_controller(struct pxafb_info
> *fbi) lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
>
> lcd_writel(fbi, FDADR0, fbi->fdadr[0]);
> - lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
> + if (fbi->lccr0 & LCCR0_SDS)
> + lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
> lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB);
> }
>
> diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h
> index 2353521..26ba9fa 100644
> --- a/drivers/video/pxafb.h
> +++ b/drivers/video/pxafb.h
> @@ -92,7 +92,8 @@ struct pxafb_layer_ops {
> struct pxafb_layer {
> struct fb_info fb;
> int id;
> - atomic_t usage;
> + int registered;
> + uint32_t usage;
> uint32_t control[2];
>
> struct pxafb_layer_ops *ops;
next prev parent reply other threads:[~2011-03-11 21:34 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-02 20:46 [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work Vasily Khoruzhick
2011-02-13 13:31 ` Russell King - ARM Linux
2011-02-15 7:35 ` Eric Miao
2011-02-15 8:41 ` Vasily Khoruzhick
2011-02-15 11:51 ` Eric Miao
2011-02-15 11:58 ` Vasily Khoruzhick
2011-02-15 13:36 ` Eric Miao
2011-02-15 13:51 ` Vasily Khoruzhick
2011-02-15 15:12 ` Eric Miao
2011-02-15 15:18 ` Vasily Khoruzhick
2011-02-17 7:43 ` [PATCH 1/2] ARM: PXA: PXAFB: Fix double-free issue Vasily Khoruzhick
2011-02-17 7:43 ` [PATCH 2/2] ARM: PXA: PXAFB: fix plane Z-ordering problem Vasily Khoruzhick
2011-02-17 11:03 ` [PATCH 1/2] ARM: PXA: PXAFB: Fix double-free issue Russell King - ARM Linux
2011-02-17 11:06 ` Vasily Khoruzhick
2011-02-20 15:02 ` [PATCH v2 1/3] " Vasily Khoruzhick
2011-02-20 15:02 ` [PATCH v2 2/3] ARM: PXA: PXAFB: Fix plane Z-ordering problem Vasily Khoruzhick
2011-02-20 15:02 ` [PATCH v2 3/3] ARM: PXA: PXAFB: Fix typo in ypos assignment Vasily Khoruzhick
2011-02-20 18:47 ` Marek Vasut
2011-02-20 18:46 ` [PATCH v2 1/3] ARM: PXA: PXAFB: Fix double-free issue Marek Vasut
2011-02-26 16:39 ` Vasily Khoruzhick
2011-03-05 22:30 ` Vasily Khoruzhick
2011-03-11 9:20 ` [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management Vasily Khoruzhick
2011-03-11 9:20 ` [PATCH 2/4] ARM: PXA: PXAFB: Fix plane Z-ordering problem Vasily Khoruzhick
2011-03-16 13:16 ` Eric Miao
2011-03-11 9:20 ` [PATCH 3/4] ARM: PXA: PXAFB: Fix typo in ypos assignment Vasily Khoruzhick
2011-03-11 21:35 ` Marek Vasut
2011-03-16 13:15 ` Eric Miao
2011-03-11 9:20 ` [PATCH 4/4] ARM: PXA: PXAFB: don't disable controller on cpufreq transition if overlay is in use Vasily Khoruzhick
2011-03-16 13:16 ` [PATCH 4/4] ARM: PXA: PXAFB: don't disable controller on cpufreq Eric Miao
2011-03-11 21:34 ` Marek Vasut [this message]
2011-03-11 21:46 ` [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management Vasily Khoruzhick
2011-03-16 11:17 ` Eric Miao
2011-02-17 18:17 ` [PATCH 1/2] ARM: PXA: PXAFB: Fix double-free issue Marek Vasut
2011-02-17 18:56 ` Russell King - ARM Linux
2011-02-18 2:24 ` Eric Miao
2011-02-15 9:48 ` [PATCH] ARM: PXA: Make PXA27x/PXA3xx overlay actually work Russell King - ARM Linux
2011-02-15 11:43 ` Eric Miao
2011-02-18 10:07 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201103112234.10904.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).