* Re: Updated mach-types update [not found] ` <20110324175945.GV2811@atomide.com> @ 2011-05-13 11:54 ` Tony Lindgren 2011-05-13 12:19 ` Jarkko Nikula 2011-05-13 14:53 ` Updated mach-types update Tomi Valkeinen 0 siblings, 2 replies; 6+ messages in thread From: Tony Lindgren @ 2011-05-13 11:54 UTC (permalink / raw) To: Russell King - ARM Linux Cc: linux-arm-kernel, linux-omap, Subhasish Ghosh, Srinath, Arun C, linux-fbdev, alsa-devel, Tomi Valkeinen, Jarkko Nikula * Tony Lindgren <tony@atomide.com> [110324 10:57]: > * Russell King - ARM Linux <linux@arm.linux.org.uk> [110320 04:39]: > > On Sun, Mar 20, 2011 at 11:03:22AM +0000, Russell King - ARM Linux wrote: > > > > Note that OMAP references machine_is_omap2evm() yet this has never been > > merged. > > > > arch/arm/plat-omap/include/plat/uncompress.h: > > > > DEBUG_LL_OMAP2(1, omap2evm); > > > > so this entry needs to be removed. > > Hmm looks like we have LCD support and ASoC support for it, but no > board :) > > Anybody working with this board? > > If so, please send patches for the related board-*.c support ASAP. > Otherwise let's plan on deleting the related support. No patches, so let's remove it. Here's the patch to do that, I'm planning to add this to my devel-cleanup branch. Regards, Tony From: Tony Lindgren <tony@atomide.com> Date: Fri, 13 May 2011 04:41:32 -0700 Subject: [PATCH] omap: Remove support for omap2evm The board support has never been merged for it as noticed by Russell King <linux@arm.linux.org.uk>. So let's remove the related dead code. Cc: linux-fbdev@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Tony Lindgren <tony@atomide.com> diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 30b891c..2b576f1 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -129,7 +129,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP1(3, sx1); /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap2evm); DEBUG_LL_OMAP2(1, omap_2430sdp); DEBUG_LL_OMAP2(1, omap_apollon); DEBUG_LL_OMAP2(1, omap_h4); diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index 49226a1..25db556 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -30,7 +30,6 @@ objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o objs-y$(CONFIG_MACH_OMAP_LDP) += lcd_ldp.o -objs-y$(CONFIG_MACH_OMAP2EVM) += lcd_omap2evm.o objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c deleted file mode 100644 index 7e7a65c..0000000 --- a/drivers/video/omap/lcd_omap2evm.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * LCD panel support for the MISTRAL OMAP2EVM board - * - * Author: Arun C <arunedarath@mistralsolutions.com> - * - * Derived from drivers/video/omap/lcd_omap3evm.c - * Derived from drivers/video/omap/lcd-apollon.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/i2c/twl.h> - -#include <plat/mux.h> -#include <asm/mach-types.h> - -#include "omapfb.h" - -#define LCD_PANEL_ENABLE_GPIO 154 -#define LCD_PANEL_LR 128 -#define LCD_PANEL_UD 129 -#define LCD_PANEL_INI 152 -#define LCD_PANEL_QVGA 148 -#define LCD_PANEL_RESB 153 - -#define TWL_LED_LEDEN 0x00 -#define TWL_PWMA_PWMAON 0x00 -#define TWL_PWMA_PWMAOFF 0x01 - -static unsigned int bklight_level; - -static int omap2evm_panel_init(struct lcd_panel *panel, - struct omapfb_device *fbdev) -{ - gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable"); - gpio_request(LCD_PANEL_LR, "LCD lr"); - gpio_request(LCD_PANEL_UD, "LCD ud"); - gpio_request(LCD_PANEL_INI, "LCD ini"); - gpio_request(LCD_PANEL_QVGA, "LCD qvga"); - gpio_request(LCD_PANEL_RESB, "LCD resb"); - - gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(LCD_PANEL_RESB, 1); - gpio_direction_output(LCD_PANEL_INI, 1); - gpio_direction_output(LCD_PANEL_QVGA, 0); - gpio_direction_output(LCD_PANEL_LR, 1); - gpio_direction_output(LCD_PANEL_UD, 1); - - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); - bklight_level = 100; - - return 0; -} - -static void omap2evm_panel_cleanup(struct lcd_panel *panel) -{ - gpio_free(LCD_PANEL_RESB); - gpio_free(LCD_PANEL_QVGA); - gpio_free(LCD_PANEL_INI); - gpio_free(LCD_PANEL_UD); - gpio_free(LCD_PANEL_LR); - gpio_free(LCD_PANEL_ENABLE_GPIO); -} - -static int omap2evm_panel_enable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); - return 0; -} - -static void omap2evm_panel_disable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); -} - -static unsigned long omap2evm_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -static int omap2evm_bklight_setlevel(struct lcd_panel *panel, - unsigned int level) -{ - u8 c; - if ((level >= 0) && (level <= 100)) { - c = (125 * (100 - level)) / 100 + 2; - twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); - bklight_level = level; - } - return 0; -} - -static unsigned int omap2evm_bklight_getlevel(struct lcd_panel *panel) -{ - return bklight_level; -} - -static unsigned int omap2evm_bklight_getmaxlevel(struct lcd_panel *panel) -{ - return 100; -} - -struct lcd_panel omap2evm_panel = { - .name = "omap2evm", - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | - OMAP_LCDC_INV_HSYNC, - - .bpp = 16, - .data_lines = 18, - .x_res = 480, - .y_res = 640, - .hsw = 3, - .hfp = 0, - .hbp = 28, - .vsw = 2, - .vfp = 1, - .vbp = 0, - - .pixel_clock = 20000, - - .init = omap2evm_panel_init, - .cleanup = omap2evm_panel_cleanup, - .enable = omap2evm_panel_enable, - .disable = omap2evm_panel_disable, - .get_caps = omap2evm_panel_get_caps, - .set_bklight_level = omap2evm_bklight_setlevel, - .get_bklight_level = omap2evm_bklight_getlevel, - .get_bklight_max = omap2evm_bklight_getmaxlevel, -}; - -static int omap2evm_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&omap2evm_panel); - return 0; -} - -static int omap2evm_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int omap2evm_panel_suspend(struct platform_device *pdev, - pm_message_t mesg) -{ - return 0; -} - -static int omap2evm_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver omap2evm_panel_driver = { - .probe = omap2evm_panel_probe, - .remove = omap2evm_panel_remove, - .suspend = omap2evm_panel_suspend, - .resume = omap2evm_panel_resume, - .driver = { - .name = "omap2evm_lcd", - .owner = THIS_MODULE, - }, -}; - -static int __init omap2evm_panel_drv_init(void) -{ - return platform_driver_register(&omap2evm_panel_driver); -} - -static void __exit omap2evm_panel_drv_exit(void) -{ - platform_driver_unregister(&omap2evm_panel_driver); -} - -module_init(omap2evm_panel_drv_init); -module_exit(omap2evm_panel_drv_exit); diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index ba9fc65..6c2c87e 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -13,7 +13,6 @@ snd-soc-rx51-objs := rx51.o snd-soc-ams-delta-objs := ams-delta.o snd-soc-osk5912-objs := osk5912.o snd-soc-overo-objs := overo.o -snd-soc-omap2evm-objs := omap2evm.o snd-soc-omap3evm-objs := omap3evm.o snd-soc-am3517evm-objs := am3517evm.o snd-soc-sdp3430-objs := sdp3430.o diff --git a/sound/soc/omap/omap2evm.c b/sound/soc/omap/omap2evm.c deleted file mode 100644 index 29b60d6..0000000 --- a/sound/soc/omap/omap2evm.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * omap2evm.c -- SoC audio machine driver for omap2evm board - * - * Author: Arun KS <arunks@mistralsolutions.com> - * - * Based on sound/soc/omap/overo.c by Steve Sakoman - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> - -#include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> -#include <plat/mcbsp.h> - -#include "omap-mcbsp.h" -#include "omap-pcm.h" - -static int omap2evm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - int ret; - - /* Set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, - SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) { - printk(KERN_ERR "can't set codec DAI configuration\n"); - return ret; - } - - /* Set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, - SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) { - printk(KERN_ERR "can't set cpu DAI configuration\n"); - return ret; - } - - /* Set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, - SND_SOC_CLOCK_IN); - if (ret < 0) { - printk(KERN_ERR "can't set codec system clock\n"); - return ret; - } - - return 0; -} - -static struct snd_soc_ops omap2evm_ops = { - .hw_params = omap2evm_hw_params, -}; - -/* Digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link omap2evm_dai = { - .name = "TWL4030", - .stream_name = "TWL4030", - .cpu_dai_name = "omap-mcbsp-dai.1", - .codec_dai_name = "twl4030-hifi", - .platform_name = "omap-pcm-audio", - .codec_name = "twl4030-codec", - .ops = &omap2evm_ops, -}; - -/* Audio machine driver */ -static struct snd_soc_card snd_soc_omap2evm = { - .name = "omap2evm", - .dai_link = &omap2evm_dai, - .num_links = 1, -}; - -static struct platform_device *omap2evm_snd_device; - -static int __init omap2evm_soc_init(void) -{ - int ret; - - if (!machine_is_omap2evm()) - return -ENODEV; - printk(KERN_INFO "omap2evm SoC init\n"); - - omap2evm_snd_device = platform_device_alloc("soc-audio", -1); - if (!omap2evm_snd_device) { - printk(KERN_ERR "Platform device allocation failed\n"); - return -ENOMEM; - } - - platform_set_drvdata(omap2evm_snd_device, &snd_soc_omap2evm); - - ret = platform_device_add(omap2evm_snd_device); - if (ret) - goto err1; - - return 0; - -err1: - printk(KERN_ERR "Unable to add platform device\n"); - platform_device_put(omap2evm_snd_device); - - return ret; -} -module_init(omap2evm_soc_init); - -static void __exit omap2evm_soc_exit(void) -{ - platform_device_unregister(omap2evm_snd_device); -} -module_exit(omap2evm_soc_exit); - -MODULE_AUTHOR("Arun KS <arunks@mistralsolutions.com>"); -MODULE_DESCRIPTION("ALSA SoC omap2evm"); -MODULE_LICENSE("GPL"); ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: Updated mach-types update 2011-05-13 11:54 ` Updated mach-types update Tony Lindgren @ 2011-05-13 12:19 ` Jarkko Nikula 2011-05-13 14:40 ` [PATCH] omap: Remove support for omap2evm (Re: Updated mach-types Tony Lindgren 2011-05-13 14:53 ` Updated mach-types update Tomi Valkeinen 1 sibling, 1 reply; 6+ messages in thread From: Jarkko Nikula @ 2011-05-13 12:19 UTC (permalink / raw) To: Tony Lindgren Cc: linux-fbdev, Russell King - ARM Linux, Ghosh, Srinath, alsa-devel, Tomi Valkeinen, Arun C, linux-omap, linux-arm-kernel, Subhasish On Fri, 13 May 2011 04:54:07 -0700 Tony Lindgren <tony@atomide.com> wrote: > * Tony Lindgren <tony@atomide.com> [110324 10:57]: > > * Russell King - ARM Linux <linux@arm.linux.org.uk> [110320 04:39]: > > > On Sun, Mar 20, 2011 at 11:03:22AM +0000, Russell King - ARM Linux wrote: > > > > > > Note that OMAP references machine_is_omap2evm() yet this has never been > > > merged. > > > > > > arch/arm/plat-omap/include/plat/uncompress.h: > > > > > > DEBUG_LL_OMAP2(1, omap2evm); > > > > > > so this entry needs to be removed. > > > > Hmm looks like we have LCD support and ASoC support for it, but no > > board :) > > > > Anybody working with this board? > > > > If so, please send patches for the related board-*.c support ASAP. > > Otherwise let's plan on deleting the related support. > > No patches, so let's remove it. Here's the patch to do that, > I'm planning to add this to my devel-cleanup branch. > Remove also from sound/soc/omap/Kconfig as well. You could put my ack for sound/soc/omap part but remember cc also Mark and Liam. Acked-by: Jarkko Nikula <jhnikula@gmail.com> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] omap: Remove support for omap2evm (Re: Updated mach-types 2011-05-13 12:19 ` Jarkko Nikula @ 2011-05-13 14:40 ` Tony Lindgren 2011-05-14 16:30 ` [PATCH] omap: Remove support for omap2evm (Re: Updated Mark Brown 2011-05-16 13:45 ` [PATCH] omap: Remove support for omap2evm (Re: Updated mach-types Liam Girdwood 0 siblings, 2 replies; 6+ messages in thread From: Tony Lindgren @ 2011-05-13 14:40 UTC (permalink / raw) To: Jarkko Nikula Cc: Russell King - ARM Linux, linux-arm-kernel, linux-omap, Subhasish Ghosh, Srinath, Arun C, linux-fbdev, alsa-devel, Tomi Valkeinen, Mark Brown, Liam Girdwood, Paul Mundt * Jarkko Nikula <jhnikula@gmail.com> [110513 05:15]: > On Fri, 13 May 2011 04:54:07 -0700 > Tony Lindgren <tony@atomide.com> wrote: > > > * Tony Lindgren <tony@atomide.com> [110324 10:57]: > > > * Russell King - ARM Linux <linux@arm.linux.org.uk> [110320 04:39]: > > > > On Sun, Mar 20, 2011 at 11:03:22AM +0000, Russell King - ARM Linux wrote: > > > > > > > > Note that OMAP references machine_is_omap2evm() yet this has never been > > > > merged. > > > > > > > > arch/arm/plat-omap/include/plat/uncompress.h: > > > > > > > > DEBUG_LL_OMAP2(1, omap2evm); > > > > > > > > so this entry needs to be removed. > > > > > > Hmm looks like we have LCD support and ASoC support for it, but no > > > board :) > > > > > > Anybody working with this board? > > > > > > If so, please send patches for the related board-*.c support ASAP. > > > Otherwise let's plan on deleting the related support. > > > > No patches, so let's remove it. Here's the patch to do that, > > I'm planning to add this to my devel-cleanup branch. > > > Remove also from sound/soc/omap/Kconfig as well. You could put my > ack for sound/soc/omap part but remember cc also Mark and Liam. Thanks, here's the updated patch. Regards, Tony From: Tony Lindgren <tony@atomide.com> Date: Fri, 13 May 2011 04:41:32 -0700 Subject: [PATCH] omap: Remove support for omap2evm The board support has never been merged for it as noticed by Russell King <linux@arm.linux.org.uk>. So let's remove the related dead code. Cc: linux-fbdev@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 30b891c..2b576f1 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -129,7 +129,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP1(3, sx1); /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap2evm); DEBUG_LL_OMAP2(1, omap_2430sdp); DEBUG_LL_OMAP2(1, omap_apollon); DEBUG_LL_OMAP2(1, omap_h4); diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index 49226a1..25db556 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -30,7 +30,6 @@ objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o objs-y$(CONFIG_MACH_OMAP_LDP) += lcd_ldp.o -objs-y$(CONFIG_MACH_OMAP2EVM) += lcd_omap2evm.o objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c deleted file mode 100644 index 7e7a65c..0000000 --- a/drivers/video/omap/lcd_omap2evm.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * LCD panel support for the MISTRAL OMAP2EVM board - * - * Author: Arun C <arunedarath@mistralsolutions.com> - * - * Derived from drivers/video/omap/lcd_omap3evm.c - * Derived from drivers/video/omap/lcd-apollon.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/i2c/twl.h> - -#include <plat/mux.h> -#include <asm/mach-types.h> - -#include "omapfb.h" - -#define LCD_PANEL_ENABLE_GPIO 154 -#define LCD_PANEL_LR 128 -#define LCD_PANEL_UD 129 -#define LCD_PANEL_INI 152 -#define LCD_PANEL_QVGA 148 -#define LCD_PANEL_RESB 153 - -#define TWL_LED_LEDEN 0x00 -#define TWL_PWMA_PWMAON 0x00 -#define TWL_PWMA_PWMAOFF 0x01 - -static unsigned int bklight_level; - -static int omap2evm_panel_init(struct lcd_panel *panel, - struct omapfb_device *fbdev) -{ - gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable"); - gpio_request(LCD_PANEL_LR, "LCD lr"); - gpio_request(LCD_PANEL_UD, "LCD ud"); - gpio_request(LCD_PANEL_INI, "LCD ini"); - gpio_request(LCD_PANEL_QVGA, "LCD qvga"); - gpio_request(LCD_PANEL_RESB, "LCD resb"); - - gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(LCD_PANEL_RESB, 1); - gpio_direction_output(LCD_PANEL_INI, 1); - gpio_direction_output(LCD_PANEL_QVGA, 0); - gpio_direction_output(LCD_PANEL_LR, 1); - gpio_direction_output(LCD_PANEL_UD, 1); - - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); - bklight_level = 100; - - return 0; -} - -static void omap2evm_panel_cleanup(struct lcd_panel *panel) -{ - gpio_free(LCD_PANEL_RESB); - gpio_free(LCD_PANEL_QVGA); - gpio_free(LCD_PANEL_INI); - gpio_free(LCD_PANEL_UD); - gpio_free(LCD_PANEL_LR); - gpio_free(LCD_PANEL_ENABLE_GPIO); -} - -static int omap2evm_panel_enable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); - return 0; -} - -static void omap2evm_panel_disable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); -} - -static unsigned long omap2evm_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -static int omap2evm_bklight_setlevel(struct lcd_panel *panel, - unsigned int level) -{ - u8 c; - if ((level >= 0) && (level <= 100)) { - c = (125 * (100 - level)) / 100 + 2; - twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); - bklight_level = level; - } - return 0; -} - -static unsigned int omap2evm_bklight_getlevel(struct lcd_panel *panel) -{ - return bklight_level; -} - -static unsigned int omap2evm_bklight_getmaxlevel(struct lcd_panel *panel) -{ - return 100; -} - -struct lcd_panel omap2evm_panel = { - .name = "omap2evm", - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | - OMAP_LCDC_INV_HSYNC, - - .bpp = 16, - .data_lines = 18, - .x_res = 480, - .y_res = 640, - .hsw = 3, - .hfp = 0, - .hbp = 28, - .vsw = 2, - .vfp = 1, - .vbp = 0, - - .pixel_clock = 20000, - - .init = omap2evm_panel_init, - .cleanup = omap2evm_panel_cleanup, - .enable = omap2evm_panel_enable, - .disable = omap2evm_panel_disable, - .get_caps = omap2evm_panel_get_caps, - .set_bklight_level = omap2evm_bklight_setlevel, - .get_bklight_level = omap2evm_bklight_getlevel, - .get_bklight_max = omap2evm_bklight_getmaxlevel, -}; - -static int omap2evm_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&omap2evm_panel); - return 0; -} - -static int omap2evm_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int omap2evm_panel_suspend(struct platform_device *pdev, - pm_message_t mesg) -{ - return 0; -} - -static int omap2evm_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver omap2evm_panel_driver = { - .probe = omap2evm_panel_probe, - .remove = omap2evm_panel_remove, - .suspend = omap2evm_panel_suspend, - .resume = omap2evm_panel_resume, - .driver = { - .name = "omap2evm_lcd", - .owner = THIS_MODULE, - }, -}; - -static int __init omap2evm_panel_drv_init(void) -{ - return platform_driver_register(&omap2evm_panel_driver); -} - -static void __exit omap2evm_panel_drv_exit(void) -{ - platform_driver_unregister(&omap2evm_panel_driver); -} - -module_init(omap2evm_panel_drv_init); -module_exit(omap2evm_panel_drv_exit); diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index b592298..99054cf 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -65,14 +65,6 @@ config SND_OMAP_SOC_OVERO Say Y if you want to add support for SoC audio on the Gumstix Overo or CompuLab CM-T35 -config SND_OMAP_SOC_OMAP2EVM - tristate "SoC Audio support for OMAP2EVM board" - depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP2EVM - select SND_OMAP_SOC_MCBSP - select SND_SOC_TWL4030 - help - Say Y if you want to add support for SoC audio on the omap2evm board. - config SND_OMAP_SOC_OMAP3EVM tristate "SoC Audio support for OMAP3EVM board" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index ba9fc65..6c2c87e 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -13,7 +13,6 @@ snd-soc-rx51-objs := rx51.o snd-soc-ams-delta-objs := ams-delta.o snd-soc-osk5912-objs := osk5912.o snd-soc-overo-objs := overo.o -snd-soc-omap2evm-objs := omap2evm.o snd-soc-omap3evm-objs := omap3evm.o snd-soc-am3517evm-objs := am3517evm.o snd-soc-sdp3430-objs := sdp3430.o diff --git a/sound/soc/omap/omap2evm.c b/sound/soc/omap/omap2evm.c deleted file mode 100644 index 29b60d6..0000000 --- a/sound/soc/omap/omap2evm.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * omap2evm.c -- SoC audio machine driver for omap2evm board - * - * Author: Arun KS <arunks@mistralsolutions.com> - * - * Based on sound/soc/omap/overo.c by Steve Sakoman - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> - -#include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> -#include <plat/mcbsp.h> - -#include "omap-mcbsp.h" -#include "omap-pcm.h" - -static int omap2evm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - int ret; - - /* Set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, - SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) { - printk(KERN_ERR "can't set codec DAI configuration\n"); - return ret; - } - - /* Set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, - SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) { - printk(KERN_ERR "can't set cpu DAI configuration\n"); - return ret; - } - - /* Set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, - SND_SOC_CLOCK_IN); - if (ret < 0) { - printk(KERN_ERR "can't set codec system clock\n"); - return ret; - } - - return 0; -} - -static struct snd_soc_ops omap2evm_ops = { - .hw_params = omap2evm_hw_params, -}; - -/* Digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link omap2evm_dai = { - .name = "TWL4030", - .stream_name = "TWL4030", - .cpu_dai_name = "omap-mcbsp-dai.1", - .codec_dai_name = "twl4030-hifi", - .platform_name = "omap-pcm-audio", - .codec_name = "twl4030-codec", - .ops = &omap2evm_ops, -}; - -/* Audio machine driver */ -static struct snd_soc_card snd_soc_omap2evm = { - .name = "omap2evm", - .dai_link = &omap2evm_dai, - .num_links = 1, -}; - -static struct platform_device *omap2evm_snd_device; - -static int __init omap2evm_soc_init(void) -{ - int ret; - - if (!machine_is_omap2evm()) - return -ENODEV; - printk(KERN_INFO "omap2evm SoC init\n"); - - omap2evm_snd_device = platform_device_alloc("soc-audio", -1); - if (!omap2evm_snd_device) { - printk(KERN_ERR "Platform device allocation failed\n"); - return -ENOMEM; - } - - platform_set_drvdata(omap2evm_snd_device, &snd_soc_omap2evm); - - ret = platform_device_add(omap2evm_snd_device); - if (ret) - goto err1; - - return 0; - -err1: - printk(KERN_ERR "Unable to add platform device\n"); - platform_device_put(omap2evm_snd_device); - - return ret; -} -module_init(omap2evm_soc_init); - -static void __exit omap2evm_soc_exit(void) -{ - platform_device_unregister(omap2evm_snd_device); -} -module_exit(omap2evm_soc_exit); - -MODULE_AUTHOR("Arun KS <arunks@mistralsolutions.com>"); -MODULE_DESCRIPTION("ALSA SoC omap2evm"); -MODULE_LICENSE("GPL"); ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] omap: Remove support for omap2evm (Re: Updated 2011-05-13 14:40 ` [PATCH] omap: Remove support for omap2evm (Re: Updated mach-types Tony Lindgren @ 2011-05-14 16:30 ` Mark Brown 2011-05-16 13:45 ` [PATCH] omap: Remove support for omap2evm (Re: Updated mach-types Liam Girdwood 1 sibling, 0 replies; 6+ messages in thread From: Mark Brown @ 2011-05-14 16:30 UTC (permalink / raw) To: Tony Lindgren Cc: Jarkko Nikula, Russell King - ARM Linux, linux-arm-kernel, linux-omap, Subhasish Ghosh, Srinath, Arun C, linux-fbdev, alsa-devel, Tomi Valkeinen, Liam Girdwood, Paul Mundt On Fri, May 13, 2011 at 07:40:32AM -0700, Tony Lindgren wrote: > Date: Fri, 13 May 2011 04:41:32 -0700 > Subject: [PATCH] omap: Remove support for omap2evm > > The board support has never been merged for it as noticed > by Russell King <linux@arm.linux.org.uk>. So let's remove the > related dead code. Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] omap: Remove support for omap2evm (Re: Updated mach-types 2011-05-13 14:40 ` [PATCH] omap: Remove support for omap2evm (Re: Updated mach-types Tony Lindgren 2011-05-14 16:30 ` [PATCH] omap: Remove support for omap2evm (Re: Updated Mark Brown @ 2011-05-16 13:45 ` Liam Girdwood 1 sibling, 0 replies; 6+ messages in thread From: Liam Girdwood @ 2011-05-16 13:45 UTC (permalink / raw) To: Tony Lindgren Cc: linux-fbdev@vger.kernel.org, Russell King - ARM Linux, Paul Mundt, Subhasish Ghosh, Mark Brown, Srinath, alsa-devel@alsa-project.org, Valkeinen, Tomi, Arun C, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org On 13/05/11 15:40, Tony Lindgren wrote: > * Jarkko Nikula <jhnikula@gmail.com> [110513 05:15]: >> On Fri, 13 May 2011 04:54:07 -0700 >> Tony Lindgren <tony@atomide.com> wrote: >> >>> * Tony Lindgren <tony@atomide.com> [110324 10:57]: >>>> * Russell King - ARM Linux <linux@arm.linux.org.uk> [110320 04:39]: >>>>> On Sun, Mar 20, 2011 at 11:03:22AM +0000, Russell King - ARM Linux wrote: >>>>> >>>>> Note that OMAP references machine_is_omap2evm() yet this has never been >>>>> merged. >>>>> >>>>> arch/arm/plat-omap/include/plat/uncompress.h: >>>>> >>>>> DEBUG_LL_OMAP2(1, omap2evm); >>>>> >>>>> so this entry needs to be removed. >>>> >>>> Hmm looks like we have LCD support and ASoC support for it, but no >>>> board :) >>>> >>>> Anybody working with this board? >>>> >>>> If so, please send patches for the related board-*.c support ASAP. >>>> Otherwise let's plan on deleting the related support. >>> >>> No patches, so let's remove it. Here's the patch to do that, >>> I'm planning to add this to my devel-cleanup branch. >>> >> Remove also from sound/soc/omap/Kconfig as well. You could put my >> ack for sound/soc/omap part but remember cc also Mark and Liam. > > Thanks, here's the updated patch. > > Regards, > > Tony > > > From: Tony Lindgren <tony@atomide.com> > Date: Fri, 13 May 2011 04:41:32 -0700 > Subject: [PATCH] omap: Remove support for omap2evm > > The board support has never been merged for it as noticed > by Russell King <linux@arm.linux.org.uk>. So let's remove the > related dead code. > > Cc: linux-fbdev@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> > Cc: Liam Girdwood <lrg@ti.com> > Cc: Paul Mundt <lethal@linux-sh.org> > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> > Acked-by: Jarkko Nikula <jhnikula@gmail.com> > Signed-off-by: Tony Lindgren <tony@atomide.com> > Acked-by: Liam Girdwood <lrg@ti.com> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Updated mach-types update 2011-05-13 11:54 ` Updated mach-types update Tony Lindgren 2011-05-13 12:19 ` Jarkko Nikula @ 2011-05-13 14:53 ` Tomi Valkeinen 1 sibling, 0 replies; 6+ messages in thread From: Tomi Valkeinen @ 2011-05-13 14:53 UTC (permalink / raw) To: Tony Lindgren Cc: Russell King - ARM Linux, linux-arm-kernel, linux-omap, Subhasish Ghosh, Srinath, Arun C, linux-fbdev, alsa-devel, Jarkko Nikula On Fri, 2011-05-13 at 04:54 -0700, Tony Lindgren wrote: > * Tony Lindgren <tony@atomide.com> [110324 10:57]: > > * Russell King - ARM Linux <linux@arm.linux.org.uk> [110320 04:39]: > > > On Sun, Mar 20, 2011 at 11:03:22AM +0000, Russell King - ARM Linux wrote: > > > > > > Note that OMAP references machine_is_omap2evm() yet this has never been > > > merged. > > > > > > arch/arm/plat-omap/include/plat/uncompress.h: > > > > > > DEBUG_LL_OMAP2(1, omap2evm); > > > > > > so this entry needs to be removed. > > > > Hmm looks like we have LCD support and ASoC support for it, but no > > board :) > > > > Anybody working with this board? > > > > If so, please send patches for the related board-*.c support ASAP. > > Otherwise let's plan on deleting the related support. > > No patches, so let's remove it. Here's the patch to do that, > I'm planning to add this to my devel-cleanup branch. For removing the lcd driver: Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tomi ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-05-16 13:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20110320110322.GC16646@n2100.arm.linux.org.uk>
[not found] ` <20110320114137.GD16646@n2100.arm.linux.org.uk>
[not found] ` <20110324175945.GV2811@atomide.com>
2011-05-13 11:54 ` Updated mach-types update Tony Lindgren
2011-05-13 12:19 ` Jarkko Nikula
2011-05-13 14:40 ` [PATCH] omap: Remove support for omap2evm (Re: Updated mach-types Tony Lindgren
2011-05-14 16:30 ` [PATCH] omap: Remove support for omap2evm (Re: Updated Mark Brown
2011-05-16 13:45 ` [PATCH] omap: Remove support for omap2evm (Re: Updated mach-types Liam Girdwood
2011-05-13 14:53 ` Updated mach-types update Tomi Valkeinen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).