From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Mundt Date: Wed, 13 Jul 2011 08:27:22 +0000 Subject: Re: [PATCH] [v2] drivers/video: use strings to specify the Freescale DIU monitor port Message-Id: <20110713082722.GJ13701@linux-sh.org> List-Id: References: <1310243894-2660-1-git-send-email-timur@freescale.com> In-Reply-To: <1310243894-2660-1-git-send-email-timur@freescale.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Timur Tabi Cc: linuxppc-dev@ozlabs.org, linux-fbdev@vger.kernel.org, agust@denx.de On Sat, Jul 09, 2011 at 03:38:14PM -0500, Timur Tabi wrote: > Instead of using ill-defined numbers (0, 1, and 2) for the monitor port, allow > the user to specify the port by name ("dvi", "lvds", or "dlvds"). This works > on the kernel command line, the module command-line, and the sysfs "monitor" > device. > > Note that changing the monitor port does not currently work on the P1022DS, > because the code that talks to the PIXIS FPGA is broken. > > Signed-off-by: Timur Tabi > Acked-by: Anatolij Gustschin > --- > arch/powerpc/platforms/512x/mpc512x_shared.c | 22 +++----- > arch/powerpc/platforms/85xx/p1022_ds.c | 47 ++++++++--------- > arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 55 +++++++++---------- > arch/powerpc/sysdev/fsl_soc.h | 25 ++++++--- > drivers/video/fsl-diu-fb.c | 74 +++++++++++++++++++------- > 5 files changed, 128 insertions(+), 95 deletions(-) > Applied, thanks.