From: Ondrej Zary <linux@rainbow-software.org>
To: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Paul Mundt <lethal@linux-sh.org>,
Ondrej Zajicek <santiago@crfreenet.org>,
linux-fbdev@vger.kernel.org,
Kernel development list <linux-kernel@vger.kernel.org>
Subject: [PATCH] s3fb: fix Virge/VX
Date: Mon, 19 Dec 2011 22:39:47 +0000 [thread overview]
Message-ID: <201112192339.52676.linux@rainbow-software.org> (raw)
Add memory size detection for Virge/VX and small delay in mode setting (same
as in X.org driver) to fix blank screen problem.
Also adjust DTPC position to fix garbled screen in some modes (tested that
this adjustment does not break other cards - at least Trio32, Trio64V+,
Trio64V2/DX, Virge, Virge/DX).
Tested on ELSA Winner 2000AVI/3D.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
--- linux-3.1-orig/drivers/video/s3fb.c 2011-10-24 09:10:05.000000000 +0200
+++ linux-3.1/drivers/video/s3fb.c 2011-12-19 23:28:34.000000000 +0100
@@ -727,7 +727,7 @@
if (par->chip = CHIP_988_VIRGE_VX) {
vga_wcrt(par->state.vgabase, 0x50, 0x00);
vga_wcrt(par->state.vgabase, 0x67, 0x50);
-
+ msleep(10); /* screen remains blank sometimes without this */
vga_wcrt(par->state.vgabase, 0x63, (mode <= 2) ? 0x90 : 0x09);
vga_wcrt(par->state.vgabase, 0x66, 0x90);
}
@@ -901,7 +901,8 @@
/* Set Data Transfer Position */
hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8;
- value = clamp((htotal + hsstart + 1) / 2, hsstart + 4, htotal + 1);
+ /* + 2 is needed for Virge/VX, does no harm on other cards */
+ value = clamp((htotal + hsstart + 1) / 2 + 2, hsstart + 4, htotal + 1);
svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value);
memset_io(info->screen_base, 0x00, screen_size);
@@ -1215,6 +1216,31 @@
info->screen_size = 2 << 20;
break;
}
+ } else if (par->chip = CHIP_988_VIRGE_VX) {
+ switch ((regval & 0x60) >> 5) {
+ case 0: /* 2MB */
+ info->screen_size = 2 << 20;
+ break;
+ case 1: /* 4MB */
+ info->screen_size = 4 << 20;
+ break;
+ case 2: /* 6MB */
+ info->screen_size = 6 << 20;
+ break;
+ case 3: /* 8MB */
+ info->screen_size = 8 << 20;
+ break;
+ }
+ /* off-screen memory */
+ regval = vga_rcrt(par->state.vgabase, 0x37);
+ switch ((regval & 0x60) >> 5) {
+ case 1: /* 4MB */
+ info->screen_size -= 4 << 20;
+ break;
+ case 2: /* 2MB */
+ info->screen_size -= 2 << 20;
+ break;
+ }
} else
info->screen_size = s3_memsizes[regval >> 5] << 10;
info->fix.smem_len = info->screen_size;
--
Ondrej Zary
next reply other threads:[~2011-12-19 22:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-19 22:39 Ondrej Zary [this message]
2011-12-21 21:44 ` [PATCH] s3fb: fix Virge/VX Florian Tobias Schandinat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201112192339.52676.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=FlorianSchandinat@gmx.de \
--cc=lethal@linux-sh.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=santiago@crfreenet.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).