Re: ASoC: wm9712: Microphone doesn't work, "Capture Volume" inverted

[Christoph Fritz <chf.fritz@googlemail.com>]

On Fri, May 04, 2012 at 03:28:45PM +0200, Christoph Fritz wrote:
> On Fri, Apr 27, 2012 at 02:46:39PM +0100, Mark Brown wrote:
> > On Fri, Apr 27, 2012 at 10:00:02AM +0200, Christoph Fritz wrote:
> > > On Thu, 2012-04-26 at 22:37 +0100, Mark Brown wrote:
> > 
> > > >   The write will be suppresed if the register contents don't
> > > > change which looks like what you're seeing here - 
> > 
> > > Can you imagine why the registers don't change?
> > 
> > I can't immediately think of any reason, no - I'd step through or
> > annotate the code and have a look.
> 
> I'm still on.
> 
> And while testing WM9712 its touchpad interface, connecting a 800x600
> display (instead of the default 640x480 one) results in a gone sound and
> input-device - pretty queer:
> 
> WM9711/WM9712 SoC Audio Codec 0.4
> asoc: platform pcm constructor failed
> asoc: can't create pcm HiFi
> asoc: failed to instantiate card PhyCORE-ac97-audio: -12
> 
> I have to admit that I used this time a 3.2 kernel. I'll test with
> current later these days.

Same behaviour with 3.4.0-rc6:

Framebuffer driver mx3fb configured for a 800x600 display:

  soc-audio soc-audio: ASoC machine PhyCORE-ac97-audio should use snd_soc_register_card()
  asoc: platform pcm constructor failed
  asoc: can't create pcm HiFi :-12
  asoc: failed to instantiate card PhyCORE-ac97-audio: -12


mx3fb configured for a 640x480 display:
  soc-audio soc-audio: ASoC machine PhyCORE-ac97-audio should use
  snd_soc_register_card()
  asoc: wm9712-hifi <-> imx-ssi.0 mapping ok

 
Thanks,
 -- Christoph