From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Date: Thu, 18 Jul 2013 07:02:20 +0000 Subject: Re: [PATCH 04/15] ARM: OMAP: USB: Add phy binding information Message-Id: <20130718070219.GM7656@atomide.com> List-Id: References: <1374129984-765-1-git-send-email-kishon@ti.com> <1374129984-765-5-git-send-email-kishon@ti.com> In-Reply-To: <1374129984-765-5-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org * Kishon Vijay Abraham I [130717 23:53]: > In order for controllers to get PHY in case of non dt boot, the phy > binding information (phy device name) should be added in the platform > data of the controller. > > Signed-off-by: Kishon Vijay Abraham I > Reviewed-by: Sylwester Nawrocki > Acked-by: Felipe Balbi > --- > arch/arm/mach-omap2/usb-musb.c | 3 +++ > include/linux/usb/musb.h | 3 +++ > 2 files changed, 6 insertions(+) > > diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c > index 8c4de27..6aa7cbf 100644 > --- a/arch/arm/mach-omap2/usb-musb.c > +++ b/arch/arm/mach-omap2/usb-musb.c > @@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) > musb_plat.mode = board_data->mode; > musb_plat.extvbus = board_data->extvbus; > > + if (cpu_is_omap34xx()) > + musb_plat.phy_label = "twl4030"; > + > if (soc_is_am35xx()) { > oh_name = "am35x_otg_hs"; > name = "musb-am35x"; I don't think there's a USB PHY on non-twl4030 chips, so this should be OK: Acked-by: Tony Lindgren > diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h > index 053c268..596f8c8 100644 > --- a/include/linux/usb/musb.h > +++ b/include/linux/usb/musb.h > @@ -104,6 +104,9 @@ struct musb_hdrc_platform_data { > /* for clk_get() */ > const char *clock; > > + /* phy label */ > + const char *phy_label; > + > /* (HOST or OTG) switch VBUS on/off */ > int (*set_vbus)(struct device *dev, int is_on); > > -- > 1.7.10.4 >