* [PATCHv3][ 3/5] video: mx3fb: Add device tree suport.
2013-10-23 12:43 [PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Denis Carikli
@ 2013-10-23 12:43 ` Denis Carikli
[not found] ` <20131025195040.0CCC3C404DA@trevor.secretlab.ca>
2013-10-26 6:40 ` Kumar Gala
2013-10-23 12:43 ` [PATCHv3][ 4/5] video: mx3fb: Introduce regulator support Denis Carikli
` (2 subsequent siblings)
3 siblings, 2 replies; 8+ messages in thread
From: Denis Carikli @ 2013-10-23 12:43 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v2->v3:
- The device tree bindings were reworked in order to make it look more like the
IPUv3 bindings.
- The interface_pix_fmt property now looks like the IPUv3 one.
---
.../devicetree/bindings/video/fsl,mx3-fb.txt | 35 ++++++
drivers/video/Kconfig | 2 +
drivers/video/mx3fb.c | 125 +++++++++++++++++---
3 files changed, 147 insertions(+), 15 deletions(-)
create mode 100644 Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
new file mode 100644
index 0000000..0b31374
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
@@ -0,0 +1,35 @@
+Freescale MX3 fb
+========
+
+Required properties:
+- compatible: Should be "fsl,mx3fb". compatible chips include the imx31 and the
+ imx35.
+- reg: should be register base and length as documented in the datasheet.
+- clocks: Handle to the ipu_gate clock.
+
+Example:
+
+lcdc: mx3fb@53fc00b4 {
+ compatible = "fsl,mx3-fb";
+ reg = <0x53fc00b4 0x0b>;
+ clocks = <&clks 55>;
+};
+
+Display support
+=======+Required properties:
+- model : The user-visible name of the display.
+
+Optional properties:
+- interface_pix_fmt: How this display is connected to the
+ crtc. Currently supported types: "rgb24", "rgb565", "rgb666"
+
+It can also have an optional timing subnode as described in
+ Documentation/devicetree/bindings/video/display-timing.txt.
+
+Example:
+
+display@di0 {
+ interface-pix-fmt = "rgb666";
+ model = "CMO-QVGA";
+};
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 14317b7..2a638df 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2359,6 +2359,8 @@ config FB_MX3
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VIDEOMODE_HELPERS
+ select FB_MODE_HELPERS
default y
help
This is a framebuffer device for the i.MX31 LCD Controller. So
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 804f874..de5a6c8 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -31,6 +31,8 @@
#include <linux/platform_data/dma-imx.h>
#include <linux/platform_data/video-mx3fb.h>
+#include <video/of_display_timing.h>
+
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -757,11 +759,13 @@ static int __set_par(struct fb_info *fbi, bool lock)
sig_cfg.Hsync_pol = true;
if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
sig_cfg.Vsync_pol = true;
- if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+ if ((fbi->var.sync & FB_SYNC_CLK_INVERT) ||
+ (fbi->var.sync & FB_SYNC_PIXDAT_HIGH_ACT))
sig_cfg.clk_pol = true;
if (fbi->var.sync & FB_SYNC_DATA_INVERT)
sig_cfg.data_pol = true;
- if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+ if ((fbi->var.sync & FB_SYNC_OE_ACT_HIGH) ||
+ (fbi->var.sync & FB_SYNC_DE_HIGH_ACT))
sig_cfg.enable_pol = true;
if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
sig_cfg.clkidle_en = true;
@@ -1351,21 +1355,75 @@ static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
return fbi;
}
+static int match_dt_disp_data(const char *property)
+{
+ if (!strcmp("rgb666", property))
+ return IPU_DISP_DATA_MAPPING_RGB666;
+ else if (!strcmp("rgb565", property))
+ return IPU_DISP_DATA_MAPPING_RGB565;
+ else if (!strcmp("rgb24", property))
+ return IPU_DISP_DATA_MAPPING_RGB888;
+ else
+ return -EINVAL;
+}
+
static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
{
struct device *dev = mx3fb->dev;
struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
- const char *name = mx3fb_pdata->name;
+ struct device_node *np = dev->of_node;
+ const char *name;
+ const char *ipu_disp_format;
unsigned int irq;
struct fb_info *fbi;
struct mx3fb_info *mx3fbi;
const struct fb_videomode *mode;
int ret, num_modes;
+ struct fb_videomode of_mode;
+ struct device_node *display_np, *root_np;
+
+ if (np) {
+ root_np = of_find_node_by_path("/");
+ if (!root_np) {
+ dev_err(dev, "Can't get the \"/\" node.\n");
+ return -EINVAL;
+ }
+
+ display_np = of_find_node_by_name(root_np, "display");
+ if (!display_np) {
+ dev_err(dev, "Can't get the display device node.\n");
+ return -EINVAL;
+ }
+
+ of_property_read_string(display_np, "interface-pix-fmt",
+ &ipu_disp_format);
+ if (!ipu_disp_format) {
+ mx3fb->disp_data_fmt = IPU_DISP_DATA_MAPPING_RGB666;
+ dev_warn(dev,
+ "ipu display data mapping was not defined, using the default rgb666.\n");
+ } else {
+ mx3fb->disp_data_fmt + match_dt_disp_data(ipu_disp_format);
+ }
+
+ if (mx3fb->disp_data_fmt = -EINVAL) {
+ dev_err(dev, "Illegal display data format \"%s\"\n",
+ ipu_disp_format);
+ return -EINVAL;
+ }
- if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
- dev_err(dev, "Illegal display data format %d\n",
+ of_property_read_string(display_np, "model", &name);
+ if (ret) {
+ dev_err(dev, "Missing display model name\n");
+ return -EINVAL;
+ }
+ } else {
+ name = mx3fb_pdata->name;
+ if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
+ dev_err(dev, "Illegal display data format %d\n",
mx3fb_pdata->disp_data_fmt);
- return -EINVAL;
+ return -EINVAL;
+ }
}
ichan->client = mx3fb;
@@ -1386,12 +1444,24 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
goto emode;
}
- if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
- mode = mx3fb_pdata->mode;
- num_modes = mx3fb_pdata->num_modes;
+ if (np) {
+ ret = of_get_fb_videomode(display_np, &of_mode,
+ OF_USE_NATIVE_MODE);
+ if (!ret) {
+ mode = &of_mode;
+ num_modes = 1;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
} else {
- mode = mx3fb_modedb;
- num_modes = ARRAY_SIZE(mx3fb_modedb);
+ if (mx3fb_pdata->mode || !mx3fb_pdata->num_modes) {
+ mode = mx3fb_pdata->mode;
+ num_modes = mx3fb_pdata->num_modes;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
}
if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
@@ -1421,7 +1491,8 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
mx3fbi->mx3fb = mx3fb;
mx3fbi->blank = FB_BLANK_NORMAL;
- mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
+ if (!np)
+ mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
init_completion(&mx3fbi->flip_cmpl);
disable_irq(ichan->eof_irq);
@@ -1449,13 +1520,26 @@ emode:
return ret;
}
+static int imx_dma_is_dt_ipu(struct dma_chan *chan)
+{
+ /* Example: 53fc0000.ipu */
+ if (chan && chan->device && chan->device->dev) {
+ char *name = dev_name(chan->device->dev);
+ name = strchr(name, '.');
+ if (name)
+ return !strcmp(name, ".ipu");
+ }
+
+ return 0;
+}
+
static bool chan_filter(struct dma_chan *chan, void *arg)
{
struct dma_chan_request *rq = arg;
struct device *dev;
struct mx3fb_platform_data *mx3fb_pdata;
- if (!imx_dma_is_ipu(chan))
+ if (!imx_dma_is_ipu(chan) && !imx_dma_is_dt_ipu(chan))
return false;
if (!rq)
@@ -1464,8 +1548,12 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
dev = rq->mx3fb->dev;
mx3fb_pdata = dev_get_platdata(dev);
- return rq->id = chan->chan_id &&
- mx3fb_pdata->dma_dev = chan->device->dev;
+ /* When using the devicetree, mx3fb_pdata is NULL */
+ if (imx_dma_is_dt_ipu(chan))
+ return rq->id = chan->chan_id;
+ else
+ return rq->id = chan->chan_id &&
+ mx3fb_pdata->dma_dev = chan->device->dev;
}
static void release_fbi(struct fb_info *fbi)
@@ -1565,9 +1653,16 @@ static int mx3fb_remove(struct platform_device *dev)
return 0;
}
+static struct of_device_id mx3fb_of_dev_id[] = {
+ { .compatible = "fsl,mx3-fb", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mx3fb_of_dev_id);
+
static struct platform_driver mx3fb_driver = {
.driver = {
.name = MX3FB_NAME,
+ .of_match_table = mx3fb_of_dev_id,
.owner = THIS_MODULE,
},
.probe = mx3fb_probe,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 8+ messages in thread[parent not found: <20131025195040.0CCC3C404DA@trevor.secretlab.ca>]
* Re: [PATCHv3][ 3/5] video: mx3fb: Add device tree suport.
[not found] ` <20131025195040.0CCC3C404DA@trevor.secretlab.ca>
@ 2013-10-26 0:18 ` Sascha Hauer
2013-10-26 6:43 ` Kumar Gala
0 siblings, 1 reply; 8+ messages in thread
From: Sascha Hauer @ 2013-10-26 0:18 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Oct 25, 2013 at 08:50:40PM +0100, Grant Likely wrote:
> On Wed, 23 Oct 2013 14:43:47 +0200, Denis Carikli <denis@eukrea.com> wrote:
> > Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > Cc: linux-fbdev@vger.kernel.org
> > Cc: Rob Herring <rob.herring@calxeda.com>
> > Cc: Pawel Moll <pawel.moll@arm.com>
> > Cc: Mark Rutland <mark.rutland@arm.com>
> > Cc: Stephen Warren <swarren@wwwdotorg.org>
> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> > Cc: devicetree@vger.kernel.org
> > Cc: Sascha Hauer <kernel@pengutronix.de>
> > Cc: linux-arm-kernel@lists.infradead.org
> > Cc: Eric Bénard <eric@eukrea.com>
> > Signed-off-by: Denis Carikli <denis@eukrea.com>
> > ---
> > ChangeLog v2->v3:
> > - The device tree bindings were reworked in order to make it look more like the
> > IPUv3 bindings.
> > - The interface_pix_fmt property now looks like the IPUv3 one.
> > ---
> > .../devicetree/bindings/video/fsl,mx3-fb.txt | 35 ++++++
> > drivers/video/Kconfig | 2 +
> > drivers/video/mx3fb.c | 125 +++++++++++++++++---
> > 3 files changed, 147 insertions(+), 15 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
> >
> > diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
> > new file mode 100644
> > index 0000000..0b31374
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
> > @@ -0,0 +1,35 @@
> > +Freescale MX3 fb
> > +========
> > +
> > +Required properties:
> > +- compatible: Should be "fsl,mx3fb". compatible chips include the imx31 and the
> > + imx35.
> > +- reg: should be register base and length as documented in the datasheet.
> > +- clocks: Handle to the ipu_gate clock.
> > +
> > +Example:
> > +
> > +lcdc: mx3fb@53fc00b4 {
> > + compatible = "fsl,mx3-fb";
> > + reg = <0x53fc00b4 0x0b>;
> > + clocks = <&clks 55>;
> > +};
>
> This (and some of the other bindings) are trivial, and they are all
> associated with a single SoC. I think it would be better to collect all
> the mx3 bindings into a single file rather than distributing them all
> over the bindings tree.
>
> I started thinking about this after some of the DT conversations in
> Edinburgh this week. Unless there is a high likelyhood of components
> being used separately, I think it is far more useful to collect all the
> bindings for an SoC into a single file. It will certainly reduce a lot
> of the boilerplate that we've been collecting in bindings documentation
> files.
>
> A long time ago I took that approach for the mpc5200 documentation[1].
> Take a look at that organization and let me know what you think.
I don't think this is a good idea. When a new SoC comes out we don't
know which components will be reused on the next SoC. This will cause a
lot of bikeshedding when it actually is reused and then has to be moved.
Also I would find it quite inconsistent if I had to lookup some devices
in a SoC file and most bindings in subsystem specific files. So when
searching for a binding I would first have to know if the hardware is
unique to the SoC or not.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCHv3][ 3/5] video: mx3fb: Add device tree suport.
2013-10-26 0:18 ` Sascha Hauer
@ 2013-10-26 6:43 ` Kumar Gala
0 siblings, 0 replies; 8+ messages in thread
From: Kumar Gala @ 2013-10-26 6:43 UTC (permalink / raw)
To: linux-arm-kernel
On Oct 25, 2013, at 7:18 PM, Sascha Hauer wrote:
> On Fri, Oct 25, 2013 at 08:50:40PM +0100, Grant Likely wrote:
>> On Wed, 23 Oct 2013 14:43:47 +0200, Denis Carikli <denis@eukrea.com> wrote:
>>> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
>>> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
>>> Cc: linux-fbdev@vger.kernel.org
>>> Cc: Rob Herring <rob.herring@calxeda.com>
>>> Cc: Pawel Moll <pawel.moll@arm.com>
>>> Cc: Mark Rutland <mark.rutland@arm.com>
>>> Cc: Stephen Warren <swarren@wwwdotorg.org>
>>> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
>>> Cc: devicetree@vger.kernel.org
>>> Cc: Sascha Hauer <kernel@pengutronix.de>
>>> Cc: linux-arm-kernel@lists.infradead.org
>>> Cc: Eric Bénard <eric@eukrea.com>
>>> Signed-off-by: Denis Carikli <denis@eukrea.com>
>>> ---
>>> ChangeLog v2->v3:
>>> - The device tree bindings were reworked in order to make it look more like the
>>> IPUv3 bindings.
>>> - The interface_pix_fmt property now looks like the IPUv3 one.
>>> ---
>>> .../devicetree/bindings/video/fsl,mx3-fb.txt | 35 ++++++
>>> drivers/video/Kconfig | 2 +
>>> drivers/video/mx3fb.c | 125 +++++++++++++++++---
>>> 3 files changed, 147 insertions(+), 15 deletions(-)
>>> create mode 100644 Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
>>> new file mode 100644
>>> index 0000000..0b31374
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
>>> @@ -0,0 +1,35 @@
>>> +Freescale MX3 fb
>>> +========
>>> +
>>> +Required properties:
>>> +- compatible: Should be "fsl,mx3fb". compatible chips include the imx31 and the
>>> + imx35.
>>> +- reg: should be register base and length as documented in the datasheet.
>>> +- clocks: Handle to the ipu_gate clock.
>>> +
>>> +Example:
>>> +
>>> +lcdc: mx3fb@53fc00b4 {
>>> + compatible = "fsl,mx3-fb";
>>> + reg = <0x53fc00b4 0x0b>;
>>> + clocks = <&clks 55>;
>>> +};
>>
>> This (and some of the other bindings) are trivial, and they are all
>> associated with a single SoC. I think it would be better to collect all
>> the mx3 bindings into a single file rather than distributing them all
>> over the bindings tree.
>>
>> I started thinking about this after some of the DT conversations in
>> Edinburgh this week. Unless there is a high likelyhood of components
>> being used separately, I think it is far more useful to collect all the
>> bindings for an SoC into a single file. It will certainly reduce a lot
>> of the boilerplate that we've been collecting in bindings documentation
>> files.
>>
>> A long time ago I took that approach for the mpc5200 documentation[1].
>> Take a look at that organization and let me know what you think.
>
> I don't think this is a good idea. When a new SoC comes out we don't
> know which components will be reused on the next SoC. This will cause a
> lot of bikeshedding when it actually is reused and then has to be moved.
>
> Also I would find it quite inconsistent if I had to lookup some devices
> in a SoC file and most bindings in subsystem specific files. So when
> searching for a binding I would first have to know if the hardware is
> unique to the SoC or not.
I agree that as new SoC come out its better to have these things split out. Also for IP that is sold by vendors like Synopsys/Designware that get used on a lot of SoCs its makes it easier to ensure consistency by having the binding split out for the IP and not the SoC.
Also, by having bindings for similar devices for different SoCs kept together it becomes easier for us to see patterns across SoCs as we might come up with a more generic binding in the future. Far more difficult if things are SoC oriented.
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCHv3][ 3/5] video: mx3fb: Add device tree suport.
2013-10-23 12:43 ` [PATCHv3][ 3/5] video: mx3fb: Add device tree suport Denis Carikli
[not found] ` <20131025195040.0CCC3C404DA@trevor.secretlab.ca>
@ 2013-10-26 6:40 ` Kumar Gala
1 sibling, 0 replies; 8+ messages in thread
From: Kumar Gala @ 2013-10-26 6:40 UTC (permalink / raw)
To: linux-arm-kernel
On Oct 23, 2013, at 7:43 AM, Denis Carikli wrote:
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: linux-fbdev@vger.kernel.org
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> ---
> ChangeLog v2->v3:
> - The device tree bindings were reworked in order to make it look more like the
> IPUv3 bindings.
> - The interface_pix_fmt property now looks like the IPUv3 one.
> ---
> .../devicetree/bindings/video/fsl,mx3-fb.txt | 35 ++++++
> drivers/video/Kconfig | 2 +
> drivers/video/mx3fb.c | 125 +++++++++++++++++---
> 3 files changed, 147 insertions(+), 15 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
>
> diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
> new file mode 100644
> index 0000000..0b31374
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
> @@ -0,0 +1,35 @@
> +Freescale MX3 fb
Can you spell out framebuffer here instead of fb
> +========
> +
> +Required properties:
> +- compatible: Should be "fsl,mx3fb". compatible chips include the imx31 and the
> + imx35.
> +- reg: should be register base and length as documented in the datasheet.
> +- clocks: Handle to the ipu_gate clock.
> +
> +Example:
> +
> +lcdc: mx3fb@53fc00b4 {
> + compatible = "fsl,mx3-fb";
> + reg = <0x53fc00b4 0x0b>;
> + clocks = <&clks 55>;
> +};
> +
> +Display support
> +=======> +Required properties:
> +- model : The user-visible name of the display.
> +
> +Optional properties:
> +- interface_pix_fmt: How this display is connected to the
> + crtc. Currently supported types: "rgb24", "rgb565", "rgb666"
Why is there no compatible for the display?
> +
> +It can also have an optional timing subnode as described in
> + Documentation/devicetree/bindings/video/display-timing.txt.
> +
> +Example:
> +
> +display@di0 {
> + interface-pix-fmt = "rgb666";
> + model = "CMO-QVGA";
> +};
how do you relate the display to the framebuffer?
- k
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 14317b7..2a638df 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -2359,6 +2359,8 @@ config FB_MX3
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> + select VIDEOMODE_HELPERS
> + select FB_MODE_HELPERS
> default y
> help
> This is a framebuffer device for the i.MX31 LCD Controller. So
> diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
> index 804f874..de5a6c8 100644
> --- a/drivers/video/mx3fb.c
> +++ b/drivers/video/mx3fb.c
> @@ -31,6 +31,8 @@
> #include <linux/platform_data/dma-imx.h>
> #include <linux/platform_data/video-mx3fb.h>
>
> +#include <video/of_display_timing.h>
> +
> #include <asm/io.h>
> #include <asm/uaccess.h>
>
> @@ -757,11 +759,13 @@ static int __set_par(struct fb_info *fbi, bool lock)
> sig_cfg.Hsync_pol = true;
> if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
> sig_cfg.Vsync_pol = true;
> - if (fbi->var.sync & FB_SYNC_CLK_INVERT)
> + if ((fbi->var.sync & FB_SYNC_CLK_INVERT) ||
> + (fbi->var.sync & FB_SYNC_PIXDAT_HIGH_ACT))
> sig_cfg.clk_pol = true;
> if (fbi->var.sync & FB_SYNC_DATA_INVERT)
> sig_cfg.data_pol = true;
> - if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
> + if ((fbi->var.sync & FB_SYNC_OE_ACT_HIGH) ||
> + (fbi->var.sync & FB_SYNC_DE_HIGH_ACT))
> sig_cfg.enable_pol = true;
> if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
> sig_cfg.clkidle_en = true;
> @@ -1351,21 +1355,75 @@ static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
> return fbi;
> }
>
> +static int match_dt_disp_data(const char *property)
> +{
> + if (!strcmp("rgb666", property))
> + return IPU_DISP_DATA_MAPPING_RGB666;
> + else if (!strcmp("rgb565", property))
> + return IPU_DISP_DATA_MAPPING_RGB565;
> + else if (!strcmp("rgb24", property))
> + return IPU_DISP_DATA_MAPPING_RGB888;
> + else
> + return -EINVAL;
> +}
> +
> static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
> {
> struct device *dev = mx3fb->dev;
> struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
> - const char *name = mx3fb_pdata->name;
> + struct device_node *np = dev->of_node;
> + const char *name;
> + const char *ipu_disp_format;
> unsigned int irq;
> struct fb_info *fbi;
> struct mx3fb_info *mx3fbi;
> const struct fb_videomode *mode;
> int ret, num_modes;
> + struct fb_videomode of_mode;
> + struct device_node *display_np, *root_np;
> +
> + if (np) {
> + root_np = of_find_node_by_path("/");
> + if (!root_np) {
> + dev_err(dev, "Can't get the \"/\" node.\n");
> + return -EINVAL;
> + }
> +
> + display_np = of_find_node_by_name(root_np, "display");
> + if (!display_np) {
> + dev_err(dev, "Can't get the display device node.\n");
> + return -EINVAL;
> + }
> +
> + of_property_read_string(display_np, "interface-pix-fmt",
> + &ipu_disp_format);
> + if (!ipu_disp_format) {
> + mx3fb->disp_data_fmt = IPU_DISP_DATA_MAPPING_RGB666;
> + dev_warn(dev,
> + "ipu display data mapping was not defined, using the default rgb666.\n");
> + } else {
> + mx3fb->disp_data_fmt > + match_dt_disp_data(ipu_disp_format);
> + }
> +
> + if (mx3fb->disp_data_fmt = -EINVAL) {
> + dev_err(dev, "Illegal display data format \"%s\"\n",
> + ipu_disp_format);
> + return -EINVAL;
> + }
>
> - if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
> - dev_err(dev, "Illegal display data format %d\n",
> + of_property_read_string(display_np, "model", &name);
> + if (ret) {
> + dev_err(dev, "Missing display model name\n");
> + return -EINVAL;
> + }
> + } else {
> + name = mx3fb_pdata->name;
> + if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
> + dev_err(dev, "Illegal display data format %d\n",
> mx3fb_pdata->disp_data_fmt);
> - return -EINVAL;
> + return -EINVAL;
> + }
> }
>
> ichan->client = mx3fb;
> @@ -1386,12 +1444,24 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
> goto emode;
> }
>
> - if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
> - mode = mx3fb_pdata->mode;
> - num_modes = mx3fb_pdata->num_modes;
> + if (np) {
> + ret = of_get_fb_videomode(display_np, &of_mode,
> + OF_USE_NATIVE_MODE);
> + if (!ret) {
> + mode = &of_mode;
> + num_modes = 1;
> + } else {
> + mode = mx3fb_modedb;
> + num_modes = ARRAY_SIZE(mx3fb_modedb);
> + }
> } else {
> - mode = mx3fb_modedb;
> - num_modes = ARRAY_SIZE(mx3fb_modedb);
> + if (mx3fb_pdata->mode || !mx3fb_pdata->num_modes) {
> + mode = mx3fb_pdata->mode;
> + num_modes = mx3fb_pdata->num_modes;
> + } else {
> + mode = mx3fb_modedb;
> + num_modes = ARRAY_SIZE(mx3fb_modedb);
> + }
> }
>
> if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
> @@ -1421,7 +1491,8 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
> mx3fbi->mx3fb = mx3fb;
> mx3fbi->blank = FB_BLANK_NORMAL;
>
> - mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
> + if (!np)
> + mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
>
> init_completion(&mx3fbi->flip_cmpl);
> disable_irq(ichan->eof_irq);
> @@ -1449,13 +1520,26 @@ emode:
> return ret;
> }
>
> +static int imx_dma_is_dt_ipu(struct dma_chan *chan)
> +{
> + /* Example: 53fc0000.ipu */
> + if (chan && chan->device && chan->device->dev) {
> + char *name = dev_name(chan->device->dev);
> + name = strchr(name, '.');
> + if (name)
> + return !strcmp(name, ".ipu");
> + }
> +
> + return 0;
> +}
> +
> static bool chan_filter(struct dma_chan *chan, void *arg)
> {
> struct dma_chan_request *rq = arg;
> struct device *dev;
> struct mx3fb_platform_data *mx3fb_pdata;
>
> - if (!imx_dma_is_ipu(chan))
> + if (!imx_dma_is_ipu(chan) && !imx_dma_is_dt_ipu(chan))
> return false;
>
> if (!rq)
> @@ -1464,8 +1548,12 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
> dev = rq->mx3fb->dev;
> mx3fb_pdata = dev_get_platdata(dev);
>
> - return rq->id = chan->chan_id &&
> - mx3fb_pdata->dma_dev = chan->device->dev;
> + /* When using the devicetree, mx3fb_pdata is NULL */
> + if (imx_dma_is_dt_ipu(chan))
> + return rq->id = chan->chan_id;
> + else
> + return rq->id = chan->chan_id &&
> + mx3fb_pdata->dma_dev = chan->device->dev;
> }
>
> static void release_fbi(struct fb_info *fbi)
> @@ -1565,9 +1653,16 @@ static int mx3fb_remove(struct platform_device *dev)
> return 0;
> }
>
> +static struct of_device_id mx3fb_of_dev_id[] = {
> + { .compatible = "fsl,mx3-fb", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mx3fb_of_dev_id);
> +
> static struct platform_driver mx3fb_driver = {
> .driver = {
> .name = MX3FB_NAME,
> + .of_match_table = mx3fb_of_dev_id,
> .owner = THIS_MODULE,
> },
> .probe = mx3fb_probe,
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCHv3][ 4/5] video: mx3fb: Introduce regulator support.
2013-10-23 12:43 [PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Denis Carikli
2013-10-23 12:43 ` [PATCHv3][ 3/5] video: mx3fb: Add device tree suport Denis Carikli
@ 2013-10-23 12:43 ` Denis Carikli
2013-10-23 12:43 ` [PATCHv3][ 5/5] ARM: dts: mbimxsd35 Add video and displays support Denis Carikli
2013-10-29 10:35 ` [PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Tomi Valkeinen
3 siblings, 0 replies; 8+ messages in thread
From: Denis Carikli @ 2013-10-23 12:43 UTC (permalink / raw)
To: linux-arm-kernel
This commit is based on the following commit by Fabio Estevam:
4344429 video: mxsfb: Introduce regulator support
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v2->v3:
- The prints are now replaced with non line wrapped prints.
- The regulator retrival has been adapted to the new DT bindings which looks
more like the IPUv3 ones.
- The regulator_is_enabled checks were kept, because regulator_disable do not
do such check.
---
drivers/video/mx3fb.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 66 insertions(+), 1 deletion(-)
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index de5a6c8..1f2ce6d 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -27,6 +27,7 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/dma/ipu-dma.h>
+#include <linux/regulator/consumer.h>
#include <linux/platform_data/dma-imx.h>
#include <linux/platform_data/video-mx3fb.h>
@@ -269,6 +270,7 @@ struct mx3fb_info {
struct dma_async_tx_descriptor *txd;
dma_cookie_t cookie;
struct scatterlist sg[2];
+ struct regulator *reg_lcd;
struct fb_var_screeninfo cur_var; /* current var info */
};
@@ -1005,6 +1007,7 @@ static void __blank(int blank, struct fb_info *fbi)
struct mx3fb_info *mx3_fbi = fbi->par;
struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
int was_blank = mx3_fbi->blank;
+ int ret;
mx3_fbi->blank = blank;
@@ -1023,6 +1026,15 @@ static void __blank(int blank, struct fb_info *fbi)
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_NORMAL:
sdc_set_brightness(mx3fb, 0);
+ if (mx3_fbi->reg_lcd) {
+ if (regulator_is_enabled(mx3_fbi->reg_lcd)) {
+ ret = regulator_disable(mx3_fbi->reg_lcd);
+ if (ret)
+ dev_warn(fbi->device,
+ "lcd regulator disable failed with error: %d\n",
+ ret);
+ }
+ }
memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
/* Give LCD time to update - enough for 50 and 60 Hz */
msleep(25);
@@ -1030,6 +1042,15 @@ static void __blank(int blank, struct fb_info *fbi)
break;
case FB_BLANK_UNBLANK:
sdc_enable_channel(mx3_fbi);
+ if (mx3_fbi->reg_lcd) {
+ if (!regulator_is_enabled(mx3_fbi->reg_lcd)) {
+ ret = regulator_enable(mx3_fbi->reg_lcd);
+ if (ret)
+ dev_warn(fbi->device,
+ "lcd regulator enable failed with error: %d\n",
+ ret);
+ }
+ }
sdc_set_brightness(mx3fb, mx3fb->backlight_level);
break;
}
@@ -1206,6 +1227,7 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
{
struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+ int ret;
console_lock();
fb_set_suspend(mx3fb->fbi, 1);
@@ -1214,7 +1236,15 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
if (mx3_fbi->blank = FB_BLANK_UNBLANK) {
sdc_disable_channel(mx3_fbi);
sdc_set_brightness(mx3fb, 0);
-
+ if (mx3_fbi->reg_lcd) {
+ if (regulator_is_enabled(mx3_fbi->reg_lcd)) {
+ ret = regulator_disable(mx3_fbi->reg_lcd);
+ if (ret)
+ dev_warn(&pdev->dev,
+ "lcd regulator disable failed with error: %d\n",
+ ret);
+ }
+ }
}
return 0;
}
@@ -1226,10 +1256,20 @@ static int mx3fb_resume(struct platform_device *pdev)
{
struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+ int ret;
if (mx3_fbi->blank = FB_BLANK_UNBLANK) {
sdc_enable_channel(mx3_fbi);
sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+ if (mx3_fbi->reg_lcd) {
+ if (!regulator_is_enabled(mx3_fbi->reg_lcd)) {
+ ret = regulator_enable(mx3_fbi->reg_lcd);
+ if (ret)
+ dev_warn(&pdev->dev,
+ "lcd regulator enable failed with error: %d\n",
+ ret);
+ }
+ }
}
console_lock();
@@ -1373,6 +1413,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
struct device_node *np = dev->of_node;
const char *name;
+ const char *regulator_name;
const char *ipu_disp_format;
unsigned int irq;
struct fb_info *fbi;
@@ -1395,6 +1436,9 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
return -EINVAL;
}
+ of_property_read_string(display_np, "regulator-name",
+ ®ulator_name);
+
of_property_read_string(display_np, "interface-pix-fmt",
&ipu_disp_format);
if (!ipu_disp_format) {
@@ -1509,6 +1553,24 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
if (ret < 0)
goto erfb;
+ /* In dt mode,
+ * using devm_regulator_get would require that the proprety referencing
+ * the regulator phandle has to be inside the mx3fb node.
+ */
+ if (np) {
+ if (regulator_name)
+ mx3fbi->reg_lcd = regulator_get(NULL, regulator_name);
+ } else {
+ mx3fbi->reg_lcd = devm_regulator_get(dev, "lcd");
+ }
+
+ if (IS_ERR(mx3fbi->reg_lcd)) {
+ dev_warn(mx3fb->dev, "Operating without regulator \"lcd\"\n");
+ mx3fbi->reg_lcd = NULL;
+ } else {
+ dev_info(mx3fb->dev, "Using \"lcd\" Regulator\n");
+ }
+
return 0;
erfb:
@@ -1575,6 +1637,7 @@ static int mx3fb_probe(struct platform_device *pdev)
dma_cap_mask_t mask;
struct dma_chan *chan;
struct dma_chan_request rq;
+ struct mx3fb_info *mx3_fbi;
/*
* Display Interface (DI) and Synchronous Display Controller (SDC)
@@ -1630,6 +1693,8 @@ ersdc0:
dmaengine_put();
iounmap(mx3fb->reg_base);
eremap:
+ mx3_fbi = mx3fb->fbi->par;
+ regulator_put(mx3_fbi->reg_lcd);
kfree(mx3fb);
dev_err(dev, "mx3fb: failed to register fb\n");
return ret;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCHv3][ 5/5] ARM: dts: mbimxsd35 Add video and displays support.
2013-10-23 12:43 [PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Denis Carikli
2013-10-23 12:43 ` [PATCHv3][ 3/5] video: mx3fb: Add device tree suport Denis Carikli
2013-10-23 12:43 ` [PATCHv3][ 4/5] video: mx3fb: Introduce regulator support Denis Carikli
@ 2013-10-23 12:43 ` Denis Carikli
2013-10-29 10:35 ` [PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Tomi Valkeinen
3 siblings, 0 replies; 8+ messages in thread
From: Denis Carikli @ 2013-10-23 12:43 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v2->v3:
- The dts were adapted to the new DT bindings which looks more like the IPUv3
ones.
---
.../imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts | 61 ++++++++++++++++++++
.../imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts | 51 ++++++++++++++++
.../imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts | 51 ++++++++++++++++
3 files changed, 163 insertions(+)
create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
new file mode 100644
index 0000000..6d186ca
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD35 with the CMO-QVGA Display";
+ compatible = "eukrea,mbimxsd35-baseboard-cmo-qvga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+ display@di0 {
+ regulator-name = "lcd";
+ interface-pix-fmt = "rgb666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdc_1>;
+ model = "CMO-QVGA";
+ display-timings {
+ qvga_timings: 320x240 {
+ clock-frequency = <6500000>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <68>;
+ hfront-porch = <20>;
+ vback-porch = <15>;
+ vfront-porch = <4>;
+ hsync-len = <30>;
+ vsync-len = <3>;
+ };
+ };
+ };
+
+ reg_lcd_3v3: lcd-en {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+ regulator-name = "lcd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 4 0>;
+ enable-active-high;
+ };
+};
+
+&lcdc {
+ lcd-supply = <®_lcd_3v3>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
new file mode 100644
index 0000000..ccf5f48
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD35 with the DVI-SVGA Display";
+ compatible = "eukrea,mbimxsd35-baseboard-dvi-svga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+ display@di0 {
+ interface-pix-fmt = "rgb666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdc_1>;
+ model = "DVI-SVGA";
+ display-timings {
+ svga_timings: 800x600 {
+ clock-frequency = <40000000>;
+ hactive = <800>;
+ vactive = <600>;
+ hback-porch = <75>;
+ hfront-porch = <75>;
+ vback-porch = <7>;
+ vfront-porch = <75>;
+ hsync-len = <7>;
+ vsync-len = <7>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts
new file mode 100644
index 0000000..6e31684
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD35 with the DVI-VGA Display";
+ compatible = "eukrea,mbimxsd35-baseboard-dvi-vga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+ display@di0 {
+ interface-pix-fmt = "rgb666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdc_1>;
+ model = "DVI-VGA";
+ display-timings {
+ vga_timings: 640x480 {
+ clock-frequency = <31250000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <100>;
+ hfront-porch = <100>;
+ vback-porch = <7>;
+ vfront-porch = <100>;
+ hsync-len = <7>;
+ vsync-len = <7>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_*
2013-10-23 12:43 [PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Denis Carikli
` (2 preceding siblings ...)
2013-10-23 12:43 ` [PATCHv3][ 5/5] ARM: dts: mbimxsd35 Add video and displays support Denis Carikli
@ 2013-10-29 10:35 ` Tomi Valkeinen
3 siblings, 0 replies; 8+ messages in thread
From: Tomi Valkeinen @ 2013-10-29 10:35 UTC (permalink / raw)
To: linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 2393 bytes --]
On 23/10/13 15:43, Denis Carikli wrote:
> Without that fix, drivers using the fb_videomode_from_videomode
> function will not be able to get certain information because
> some DISPLAY_FLAGS_* have no corresponding FB_SYNC_*.
>
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: linux-fbdev@vger.kernel.org
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> ChangeLog v2->v3:
> - Added Jean-Christophe PLAGNIOL-VILLARD's ACK.
> ---
> drivers/video/fbmon.c | 4 ++++
> include/uapi/linux/fb.h | 2 ++
> 2 files changed, 6 insertions(+)
>
> diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
> index 6103fa6..29a9ed0 100644
> --- a/drivers/video/fbmon.c
> +++ b/drivers/video/fbmon.c
> @@ -1402,6 +1402,10 @@ int fb_videomode_from_videomode(const struct videomode *vm,
> fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH)
> fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> + if (vm->flags & DISPLAY_FLAGS_DE_HIGH)
> + fbmode->sync |= FB_SYNC_DE_HIGH_ACT;
> + if (vm->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
> + fbmode->sync |= FB_SYNC_PIXDAT_HIGH_ACT;
> if (vm->flags & DISPLAY_FLAGS_INTERLACED)
> fbmode->vmode |= FB_VMODE_INTERLACED;
> if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
> diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h
> index fb795c3..30487df 100644
> --- a/include/uapi/linux/fb.h
> +++ b/include/uapi/linux/fb.h
> @@ -215,6 +215,8 @@ struct fb_bitfield {
> /* vtotal = 144d/288n/576i => PAL */
> /* vtotal = 121d/242n/484i => NTSC */
> #define FB_SYNC_ON_GREEN 32 /* sync on green */
> +#define FB_SYNC_DE_HIGH_ACT 64 /* data enable high active */
> +#define FB_SYNC_PIXDAT_HIGH_ACT 64 /* data enable high active */
This can't be right. You map both flags to value 64. And the comment is
the same for both.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread