From: Thierry Reding <thierry.reding@gmail.com>
To: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
linux-pwm@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Jingoo Han <jingoohan1@gmail.com>,
Lee Jones <lee.jones@linaro.org>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Revert "backlight: pwm: Handle EPROBE_DEFER while requesting the PWM"
Date: Mon, 05 Oct 2015 12:58:03 +0000 [thread overview]
Message-ID: <20151005125803.GA30025@ulmo> (raw)
In-Reply-To: <20151005131912.4da38169@bbrezillon>
[-- Attachment #1: Type: text/plain, Size: 4225 bytes --]
On Mon, Oct 05, 2015 at 01:19:12PM +0200, Boris Brezillon wrote:
> Hi Thierry,
>
> On Mon, 5 Oct 2015 11:35:43 +0200
> Thierry Reding <thierry.reding@gmail.com> wrote:
>
> > On Thu, Oct 01, 2015 at 10:00:22AM +0200, Nicolas Ferre wrote:
> > > Le 30/09/2015 21:29, Robert Jarzmik a écrit :
> > > > Robert Jarzmik <robert.jarzmik@free.fr> writes:
> > > >
> > > >> This reverts commit 68feaca0b13e453aa14ee064c1736202b48b342f.
> > > >> This commit breaks legacy platforms, for which :
> > > >> (a) no pwm table is added (legacy platforms)
> > > >> (b) in this case, in pwm_get(), pmw_lookup_list is empty, and therefore
> > > >> chosen == NULL, and therefore pwm_get() returns NULL, and pwm_get()
> > > >> returns -EPROBE_DEFER
> > > >> (c) as a consequence, this code is unreachable in pwm_bl.c :
> > > >> if (IS_ERR(pb->pwm)) {
> > > >> ret = PTR_ERR(pb->pwm);
> > > >> dev_info(&pdev->dev, "%s:%d(): %d\n", __func__, __LINE__, ret);
> > > >> if (ret == -EPROBE_DEFER)
> > > >> goto err_alloc;
> > > >>
> > > >> dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
> > > >> pb->legacy = true;
> > > >> pb->pwm = pwm_request(data->pwm_id, "pwm-backlight");
> > > >>
> > > >> As this code is unreachable, all legacy platforms relying on pwm_id are
> > > >> broken, amongst which pxa have been tested as broken.
> > > >>
> > > >> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> > > > Thierry, would you have a look please ?
> > > > As I said before, all legacy platform relying on pwm_id are broken. I'd like to
> > > > be sure this lands in the next -rc series.
> > >
> > > Well, as I answered on the linux-pwm mailing-list (I was not in copy) here:
> > > http://article.gmane.org/gmane.linux.pwm/2744
> > > I wonder if it's not easier to fix the platforms and add the pwm tables...
> > >
> > > Otherwise, Boris proposed this fix:
> > > 8<-----------------------------------------------------------
> > > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> > > index eff379b..00483d4 100644
> > > --- a/drivers/video/backlight/pwm_bl.c
> > > +++ b/drivers/video/backlight/pwm_bl.c
> > > @@ -273,15 +273,15 @@ static int pwm_backlight_probe(struct platform_device *pdev)
> > > pb->pwm = devm_pwm_get(&pdev->dev, NULL);
> > > if (IS_ERR(pb->pwm)) {
> > > ret = PTR_ERR(pb->pwm);
> > > - if (ret == -EPROBE_DEFER)
> > > - goto err_alloc;
> > >
> > > dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
> > > pb->legacy = true;
> > > pb->pwm = pwm_request(data->pwm_id, "pwm-backlight");
> > > if (IS_ERR(pb->pwm)) {
> > > dev_err(&pdev->dev, "unable to request legacy PWM\n");
> > > - ret = PTR_ERR(pb->pwm);
> > > + if (ret != -EPROBE_DEFER)
> > > + ret = PTR_ERR(pb->pwm);
> > > +
> > > goto err_alloc;
> > > }
> > > }
> > >
> > > which is not tested and may add an extra non-valid error log.
> >
> > This is a little risky in my opinion. Not only does it print two error
> > messages for non-legacy platforms (that would be another regression if
> > you want to be nit-picking), but it is subtly buggy. If you have a
> > system with multiple PWM providers, you could end up failing the first
> > pwm_get() with -EPROBE_DEFER but then continue to the legacy case, and
> > this could succeed because data->pwm_id == 0, and that other provider
> > could be exporting the PWM with this ID. If I remember correctly this
> > was one of the reasons why the offending commit was merged in the first
> > place.
>
> Just for the record, when I proposed this fix to Nicolas, I clearly
> stated that this was not the way to go, and that fixing the offending
> platforms to use PWM lookup table was the only sane solution, though I
> didn't thought about the invalid PWM id case leading to buggy behavior.
As chance would have it, this bubbled to the top of my inbox today:
http://patchwork.ozlabs.org/patch/483993/
I think that conflicts with Nicolas' -EPROBE_DEFER patch, but I think
reverting Nicolas' patch and then applying the above on top might fix
this nicely for everybody.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2015-10-05 12:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-26 19:24 [PATCH] Revert "backlight: pwm: Handle EPROBE_DEFER while requesting the PWM" Robert Jarzmik
2015-09-30 19:29 ` Robert Jarzmik
2015-10-01 8:00 ` Nicolas Ferre
2015-10-01 9:06 ` Robert Jarzmik
2015-10-01 17:39 ` Robert Jarzmik
2015-10-05 9:35 ` Thierry Reding
2015-10-05 11:19 ` Boris Brezillon
2015-10-05 12:58 ` Thierry Reding [this message]
2015-10-05 13:30 ` Boris Brezillon
2015-10-05 14:07 ` Thierry Reding
2015-10-05 15:25 ` Boris Brezillon
2015-10-12 12:39 ` Vladimir Zapolskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151005125803.GA30025@ulmo \
--to=thierry.reding@gmail.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=jingoohan1@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=robert.jarzmik@free.fr \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).