From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ujfalusi Date: Fri, 30 Sep 2016 07:02:59 +0000 Subject: [PATCH 2/2] backlight: pwm_bl: Check the pwm state for initial backlight power state Message-Id: <20160930070259.5710-3-peter.ujfalusi@ti.com> List-Id: References: <20160930070259.5710-1-peter.ujfalusi@ti.com> In-Reply-To: <20160930070259.5710-1-peter.ujfalusi@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: thierry.reding@gmail.com, jingoohan1@gmail.com, lee.jones@linaro.org Cc: tomi.valkeinen@ti.com, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, p.zabel@pengutronix.de If the pwm is not enabled the backlight initially should not be enabled either if we have booted with DT and there is a phandle pointing to the backlight node. The patch extends the checks to decide if we should keep the backlight off initially. Signed-off-by: Peter Ujfalusi --- drivers/video/backlight/pwm_bl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 9bc4715bf116..e4326bbf807f 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -223,6 +223,10 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb) if (!regulator_is_enabled(pb->power_supply)) return FB_BLANK_POWERDOWN; + /* The pwm is disabled, keep it like this */ + if (!pwm_is_enabled(pb->pwm)) + return FB_BLANK_POWERDOWN; + return FB_BLANK_UNBLANK; } -- 2.10.0