From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ujfalusi Date: Tue, 22 Nov 2016 13:41:23 +0000 Subject: [PATCH v4 2/2] backlight: pwm_bl: Check the PWM state for initial backlight power state Message-Id: <20161122134123.1209-3-peter.ujfalusi@ti.com> List-Id: References: <20161122134123.1209-1-peter.ujfalusi@ti.com> In-Reply-To: <20161122134123.1209-1-peter.ujfalusi@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: thierry.reding@gmail.com, lee.jones@linaro.org Cc: tomi.valkeinen@ti.com, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, p.zabel@pengutronix.de If the PWM is not enabled the backlight initially should not be enabled either if we have booted with DT and there is a phandle pointing to the backlight node. The patch extends the checks to decide if we should keep the backlight off initially. Signed-off-by: Peter Ujfalusi Acked-by: Philipp Zabel Reviewed-by: Thierry Reding --- drivers/video/backlight/pwm_bl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 5712ddd053dd..d7efcb632f7d 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -215,6 +215,10 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb) if (!regulator_is_enabled(pb->power_supply)) return FB_BLANK_POWERDOWN; + /* The PWM is disabled, keep it like this */ + if (!pwm_is_enabled(pb->pwm)) + return FB_BLANK_POWERDOWN; + return FB_BLANK_UNBLANK; } -- 2.11.0.rc2