From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Cercueil Date: Sun, 22 Jan 2017 14:49:38 +0000 Subject: [PATCH v2 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Message-Id: <20170122144947.16158-6-paul@crapouillou.net> List-Id: References: <27071da2f01d48141e8ac3dfaa13255d@mail.crapouillou.net> <20170122144947.16158-1-paul@crapouillou.net> In-Reply-To: <20170122144947.16158-1-paul@crapouillou.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Linus Walleij , Rob Herring , Mark Rutland , Ralf Baechle , Ulf Hansson Cc: Boris Brezillon , Thierry Reding , Bartlomiej Zolnierkiewicz , Maarten ter Huurne , Lars-Peter Clausen , Paul Burton , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, james.hogan@imgtec.com, Paul Cercueil There is a pinctrl driver for each of the Ingenic SoCs supported by the upstream Linux kernel. In order to switch away from the old GPIO platform code, we now enable the pinctrl drivers by default for the Ingenic SoCs. Signed-off-by: Paul Cercueil --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) v2: No changes diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b3c5bde43d34..fc720e37661e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -359,6 +359,7 @@ config MACH_INGENIC select SYS_SUPPORTS_ZBOOT_UART16550 select DMA_NONCOHERENT select IRQ_MIPS_CPU + select PINCTRL select GPIOLIB select COMMON_CLK select GENERIC_IRQ_CHIP -- 2.11.0