From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Date: Wed, 08 Feb 2017 12:53:24 +0000 Subject: Re: [PATCH v4 2/2] backlight arcxcnn devicetree bindings for ArcticSand Message-Id: <20170208125324.w3udiu2jxrwf2rld@dell> List-Id: References: <1485530378-6217-1-git-send-email-olimpiu@arcticsand.com> In-Reply-To: <1485530378-6217-1-git-send-email-olimpiu@arcticsand.com> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: Olimpiu Dejeu , daniel.thompson@linaro.org Cc: robh@kernel.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, devicetree@vger.kernel.org, jingoohan1@gmail.com, bdodge@arcticsand.com, joe@perches.com, medasaro@arcticsand.com Cc'ing Daniel Thompson, the new Maintainer. On Fri, 27 Jan 2017, Olimpiu Dejeu wrote: > backlight: Add devicetree bindings for the Arctic Sand backlight driver > This patch provides devicetree bindings for the Arctic Sand > driver submitted in the previous patch > Acked-by: Rob Herring > Signed-off-by: Olimpiu Dejeu > --- >=20 > v3 =3D> v4: > - Added spaces for increased readability per Lee Jones > v2 =3D> v3: > - Version updated to match other patch in set. No other changes. > v1 =3D> v2: > - Version updated to match other patch in set. No other changes. >=20 > .../bindings/leds/backlight/arcxcnn_bl.txt | 31 ++++++++++++++++= ++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/backlight/arcx= cnn_bl.txt >=20 > diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.= txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt > new file mode 100644 > index 0000000..ecb7731 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt > @@ -0,0 +1,31 @@ > +Binding for ArcticSand arc2c0608 LED driver > + > +Required properties: > +- compatible: should be "arc,arc2c0608" > +- reg: slave address > + > +Optional properties: > +- default-brightness: brightness value on boot, value from: 0-4095 > +- label: The name of the backlight device > + See Documentation/devicetree/bindings/leds/common.txt > +- led-sources: List of enabled channels from 0 to 5. > + See Documentation/devicetree/bindings/leds/common.txt > + > +- arc,led-config-0: setting for register ILED_CONFIG_0 > +- arc,led-config-1: setting for register ILED_CONFIG_1 > +- arc,dim-freq: PWM mode frequence setting (bits [3:0] used) > +- arc,comp-config: setting for register CONFIG_COMP > +- arc,filter-config: setting for register FILTER_CONFIG > +- arc,trim-config: setting for register IMAXTUNE > + > +Example: > + > +arc2c0608@30 { > + compatible =3D "arc,arc2c0608"; > + reg =3D <0x30>; > + default-brightness =3D <500>; > + label =3D "lcd-backlight"; > + linux,default-trigger =3D "backlight"; > + led-sources =3D <0 1 2 5>; > +}; > + --=20 Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org =E2=94=82 Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog