From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Date: Wed, 15 Mar 2017 20:24:22 +0000 Subject: Re: [PATCH 2/2 v3] dt-bindings: display: imx: entry for AUS mode Message-Id: <20170315202422.7agjocsvwxdi5ha2@rob-hp-laptop> List-Id: References: <1488193030-13064-1-git-send-email-martin@kaiser.cx> <1488997376-1564-1-git-send-email-martin@kaiser.cx> <1488997376-1564-2-git-send-email-martin@kaiser.cx> In-Reply-To: <1488997376-1564-2-git-send-email-martin-XxZfDwE/svGeZLLa646FqQ@public.gmane.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Martin Kaiser Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Bartlomiej Zolnierkiewicz , Sascha Hauer , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Mark Rutland , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org On Wed, Mar 08, 2017 at 07:22:56PM +0100, Martin Kaiser wrote: > Allow setting the AUS mode for a display from the device tree. > Use an optional boolean property. AUS mode can be set only on imx21 > and compatible chipsets. > > Signed-off-by: Martin Kaiser > --- > v3: > use a boolean DT property instead of the register value > separate patches for DT binding and code changes > > v2: > re-sending DT bindings and code changes as one patch > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt > index 7a5c0e2..cacae0e 100644 > --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt > +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt > @@ -13,6 +13,8 @@ Required nodes: > Additional, the display node has to define properties: > - bits-per-pixel: Bits per pixel > - fsl,pcr: LCDC PCR value > + A display node may optionally define > + - fsl,aus_mode: boolean to enable AUS mode (only for imx21) fsl,aus-mode With that, Acked-by: Rob Herring