* [PATCH] video: fbdev: remove dead igafb driver
[not found] <CGME20171018125650epcas1p40c181757104f1cb73b1a41596a63b465@epcas1p4.samsung.com>
@ 2017-10-18 12:56 ` Bartlomiej Zolnierkiewicz
2017-10-18 13:14 ` John Paul Adrian Glaubitz
0 siblings, 1 reply; 5+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2017-10-18 12:56 UTC (permalink / raw)
To: linux-fbdev
Cc: sparclinux, Bhumika Goyal, linux-kernel, dri-devel,
David S. Miller
igafb driver hasn't compiled since at least kernel v2.6.34 as
commit 6016a363f6b5 ("of: unify phandle name in struct device_node")
missed updating igafb.c to use dp->phandle instead of dp->node.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/video/fbdev/Kconfig | 10
drivers/video/fbdev/Makefile | 1
drivers/video/fbdev/igafb.c | 579 -------------------------------------------
include/video/iga.h | 24 -
4 files changed, 614 deletions(-)
Index: b/drivers/video/fbdev/Kconfig
=================================--- a/drivers/video/fbdev/Kconfig 2017-10-18 14:35:21.927448311 +0200
+++ b/drivers/video/fbdev/Kconfig 2017-10-18 14:39:19.455445309 +0200
@@ -905,16 +905,6 @@ config FB_LEO
This is the frame buffer device driver for the SBUS-based Sun ZX
(leo) frame buffer cards.
-config FB_IGA
- bool "IGA 168x display support"
- depends on (FB = y) && SPARC32
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the INTERGRAPHICS 1680 and
- successor frame buffer cards.
-
config FB_XVR500
bool "Sun XVR-500 3DLABS Wildcat support"
depends on (FB = y) && PCI && SPARC64
Index: b/drivers/video/fbdev/Makefile
=================================--- a/drivers/video/fbdev/Makefile 2017-10-18 14:35:21.927448311 +0200
+++ b/drivers/video/fbdev/Makefile 2017-10-18 14:39:30.555445169 +0200
@@ -64,7 +64,6 @@ obj-$(CONFIG_FB_HGA) += hga
obj-$(CONFIG_FB_XVR500) += sunxvr500.o
obj-$(CONFIG_FB_XVR2500) += sunxvr2500.o
obj-$(CONFIG_FB_XVR1000) += sunxvr1000.o
-obj-$(CONFIG_FB_IGA) += igafb.o
obj-$(CONFIG_FB_APOLLO) += dnfb.o
obj-$(CONFIG_FB_Q40) += q40fb.o
obj-$(CONFIG_FB_TGA) += tgafb.o
Index: b/drivers/video/fbdev/igafb.c
=================================--- a/drivers/video/fbdev/igafb.c 2017-10-18 14:35:22.007448310 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,579 +0,0 @@
-/*
- * linux/drivers/video/igafb.c -- Frame buffer device for IGA 1682
- *
- * Copyright (C) 1998 Vladimir Roganov and Gleb Raiko
- *
- * This driver is partly based on the Frame buffer device for ATI Mach64
- * and partially on VESA-related code.
- *
- * Copyright (C) 1997-1998 Geert Uytterhoeven
- * Copyright (C) 1998 Bernd Harries
- * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/******************************************************************************
-
- TODO:
- Despite of IGA Card has advanced graphic acceleration,
- initial version is almost dummy and does not support it.
- Support for video modes and acceleration must be added
- together with accelerated X-Windows driver implementation.
-
- Most important thing at this moment is that we have working
- JavaEngine1 console & X with new console interface.
-
-******************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/nvram.h>
-
-#include <asm/io.h>
-
-#ifdef CONFIG_SPARC
-#include <asm/prom.h>
-#include <asm/pcic.h>
-#endif
-
-#include <video/iga.h>
-
-struct pci_mmap_map {
- unsigned long voff;
- unsigned long poff;
- unsigned long size;
- unsigned long prot_flag;
- unsigned long prot_mask;
-};
-
-struct iga_par {
- struct pci_mmap_map *mmap_map;
- unsigned long frame_buffer_phys;
- unsigned long io_base;
-};
-
-struct fb_info fb_info;
-
-struct fb_fix_screeninfo igafb_fix __initdata = {
- .id = "IGA 1682",
- .type = FB_TYPE_PACKED_PIXELS,
- .mmio_len = 1000
-};
-
-struct fb_var_screeninfo default_var = {
- /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
- .xres = 640,
- .yres = 480,
- .xres_virtual = 640,
- .yres_virtual = 480,
- .bits_per_pixel = 8,
- .red = {0, 8, 0 },
- .green = {0, 8, 0 },
- .blue = {0, 8, 0 },
- .height = -1,
- .width = -1,
- .accel_flags = FB_ACCEL_NONE,
- .pixclock = 39722,
- .left_margin = 48,
- .right_margin = 16,
- .upper_margin = 33,
- .lower_margin = 10,
- .hsync_len = 96,
- .vsync_len = 2,
- .vmode = FB_VMODE_NONINTERLACED
-};
-
-#ifdef CONFIG_SPARC
-struct fb_var_screeninfo default_var_1024x768 __initdata = {
- /* 1024x768, 75 Hz, Non-Interlaced (78.75 MHz dotclock) */
- .xres = 1024,
- .yres = 768,
- .xres_virtual = 1024,
- .yres_virtual = 768,
- .bits_per_pixel = 8,
- .red = {0, 8, 0 },
- .green = {0, 8, 0 },
- .blue = {0, 8, 0 },
- .height = -1,
- .width = -1,
- .accel_flags = FB_ACCEL_NONE,
- .pixclock = 12699,
- .left_margin = 176,
- .right_margin = 16,
- .upper_margin = 28,
- .lower_margin = 1,
- .hsync_len = 96,
- .vsync_len = 3,
- .vmode = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
-};
-
-struct fb_var_screeninfo default_var_1152x900 __initdata = {
- /* 1152x900, 76 Hz, Non-Interlaced (110.0 MHz dotclock) */
- .xres = 1152,
- .yres = 900,
- .xres_virtual = 1152,
- .yres_virtual = 900,
- .bits_per_pixel = 8,
- .red = { 0, 8, 0 },
- .green = { 0, 8, 0 },
- .blue = { 0, 8, 0 },
- .height = -1,
- .width = -1,
- .accel_flags = FB_ACCEL_NONE,
- .pixclock = 9091,
- .left_margin = 234,
- .right_margin = 24,
- .upper_margin = 34,
- .lower_margin = 3,
- .hsync_len = 100,
- .vsync_len = 3,
- .vmode = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
-};
-
-struct fb_var_screeninfo default_var_1280x1024 __initdata = {
- /* 1280x1024, 75 Hz, Non-Interlaced (135.00 MHz dotclock) */
- .xres = 1280,
- .yres = 1024,
- .xres_virtual = 1280,
- .yres_virtual = 1024,
- .bits_per_pixel = 8,
- .red = {0, 8, 0 },
- .green = {0, 8, 0 },
- .blue = {0, 8, 0 },
- .height = -1,
- .width = -1,
- .accel_flags = 0,
- .pixclock = 7408,
- .left_margin = 248,
- .right_margin = 16,
- .upper_margin = 38,
- .lower_margin = 1,
- .hsync_len = 144,
- .vsync_len = 3,
- .vmode = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED
-};
-
-/*
- * Memory-mapped I/O functions for Sparc PCI
- *
- * On sparc we happen to access I/O with memory mapped functions too.
- */
-#define pci_inb(par, reg) readb(par->io_base+(reg))
-#define pci_outb(par, val, reg) writeb(val, par->io_base+(reg))
-
-static inline unsigned int iga_inb(struct iga_par *par, unsigned int reg,
- unsigned int idx)
-{
- pci_outb(par, idx, reg);
- return pci_inb(par, reg + 1);
-}
-
-static inline void iga_outb(struct iga_par *par, unsigned char val,
- unsigned int reg, unsigned int idx )
-{
- pci_outb(par, idx, reg);
- pci_outb(par, val, reg+1);
-}
-
-#endif /* CONFIG_SPARC */
-
-/*
- * Very important functionality for the JavaEngine1 computer:
- * make screen border black (usign special IGA registers)
- */
-static void iga_blank_border(struct iga_par *par)
-{
- int i;
-#if 0
- /*
- * PROM does this for us, so keep this code as a reminder
- * about required read from 0x3DA and writing of 0x20 in the end.
- */
- (void) pci_inb(par, 0x3DA); /* required for every access */
- pci_outb(par, IGA_IDX_VGA_OVERSCAN, IGA_ATTR_CTL);
- (void) pci_inb(par, IGA_ATTR_CTL+1);
- pci_outb(par, 0x38, IGA_ATTR_CTL);
- pci_outb(par, 0x20, IGA_ATTR_CTL); /* re-enable visual */
-#endif
- /*
- * This does not work as it was designed because the overscan
- * color is looked up in the palette. Therefore, under X11
- * overscan changes color.
- */
- for (i=0; i < 3; i++)
- iga_outb(par, 0, IGA_EXT_CNTRL, IGA_IDX_OVERSCAN_COLOR + i);
-}
-
-#ifdef CONFIG_SPARC
-static int igafb_mmap(struct fb_info *info,
- struct vm_area_struct *vma)
-{
- struct iga_par *par = (struct iga_par *)info->par;
- unsigned int size, page, map_size = 0;
- unsigned long map_offset = 0;
- int i;
-
- if (!par->mmap_map)
- return -ENXIO;
-
- size = vma->vm_end - vma->vm_start;
-
- /* Each page, see which map applies */
- for (page = 0; page < size; ) {
- map_size = 0;
- for (i = 0; par->mmap_map[i].size; i++) {
- unsigned long start = par->mmap_map[i].voff;
- unsigned long end = start + par->mmap_map[i].size;
- unsigned long offset = (vma->vm_pgoff << PAGE_SHIFT) + page;
-
- if (start > offset)
- continue;
- if (offset >= end)
- continue;
-
- map_size = par->mmap_map[i].size - (offset - start);
- map_offset = par->mmap_map[i].poff + (offset - start);
- break;
- }
- if (!map_size) {
- page += PAGE_SIZE;
- continue;
- }
- if (page + map_size > size)
- map_size = size - page;
-
- pgprot_val(vma->vm_page_prot) &= ~(par->mmap_map[i].prot_mask);
- pgprot_val(vma->vm_page_prot) |= par->mmap_map[i].prot_flag;
-
- if (remap_pfn_range(vma, vma->vm_start + page,
- map_offset >> PAGE_SHIFT, map_size, vma->vm_page_prot))
- return -EAGAIN;
-
- page += map_size;
- }
-
- if (!map_size)
- return -EINVAL;
-
- vma->vm_flags |= VM_IO;
- return 0;
-}
-#endif /* CONFIG_SPARC */
-
-static int igafb_setcolreg(unsigned regno, unsigned red, unsigned green,
- unsigned blue, unsigned transp,
- struct fb_info *info)
-{
- /*
- * Set a single color register. The values supplied are
- * already rounded down to the hardware's capabilities
- * (according to the entries in the `var' structure). Return
- * != 0 for invalid regno.
- */
- struct iga_par *par = (struct iga_par *)info->par;
-
- if (regno >= info->cmap.len)
- return 1;
-
- pci_outb(par, regno, DAC_W_INDEX);
- pci_outb(par, red, DAC_DATA);
- pci_outb(par, green, DAC_DATA);
- pci_outb(par, blue, DAC_DATA);
-
- if (regno < 16) {
- switch (info->var.bits_per_pixel) {
- case 16:
- ((u16*)(info->pseudo_palette))[regno] =
- (regno << 10) | (regno << 5) | regno;
- break;
- case 24:
- ((u32*)(info->pseudo_palette))[regno] =
- (regno << 16) | (regno << 8) | regno;
- break;
- case 32:
- { int i;
- i = (regno << 8) | regno;
- ((u32*)(info->pseudo_palette))[regno] = (i << 16) | i;
- }
- break;
- }
- }
- return 0;
-}
-
-/*
- * Framebuffer option structure
- */
-static struct fb_ops igafb_ops = {
- .owner = THIS_MODULE,
- .fb_setcolreg = igafb_setcolreg,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-#ifdef CONFIG_SPARC
- .fb_mmap = igafb_mmap,
-#endif
-};
-
-static int __init iga_init(struct fb_info *info, struct iga_par *par)
-{
- char vramsz = iga_inb(par, IGA_EXT_CNTRL, IGA_IDX_EXT_BUS_CNTL)
- & MEM_SIZE_ALIAS;
- int video_cmap_len;
-
- switch (vramsz) {
- case MEM_SIZE_1M:
- info->fix.smem_len = 0x100000;
- break;
- case MEM_SIZE_2M:
- info->fix.smem_len = 0x200000;
- break;
- case MEM_SIZE_4M:
- case MEM_SIZE_RESERVED:
- info->fix.smem_len = 0x400000;
- break;
- }
-
- if (info->var.bits_per_pixel > 8)
- video_cmap_len = 16;
- else
- video_cmap_len = 256;
-
- info->fbops = &igafb_ops;
- info->flags = FBINFO_DEFAULT;
-
- fb_alloc_cmap(&info->cmap, video_cmap_len, 0);
-
- if (register_framebuffer(info) < 0)
- return 0;
-
- fb_info(info, "%s frame buffer device at 0x%08lx [%dMB VRAM]\n",
- info->fix.id, par->frame_buffer_phys, info->fix.smem_len >> 20);
-
- iga_blank_border(par);
- return 1;
-}
-
-static int __init igafb_init(void)
-{
- struct fb_info *info;
- struct pci_dev *pdev;
- struct iga_par *par;
- unsigned long addr;
- int size, iga2000 = 0;
-
- if (fb_get_options("igafb", NULL))
- return -ENODEV;
-
- pdev = pci_get_device(PCI_VENDOR_ID_INTERG,
- PCI_DEVICE_ID_INTERG_1682, 0);
- if (pdev = NULL) {
- /*
- * XXX We tried to use cyber2000fb.c for IGS 2000.
- * But it does not initialize the chip in JavaStation-E, alas.
- */
- pdev = pci_get_device(PCI_VENDOR_ID_INTERG, 0x2000, 0);
- if(pdev = NULL) {
- return -ENXIO;
- }
- iga2000 = 1;
- }
- /* We leak a reference here but as it cannot be unloaded this is
- fine. If you write unload code remember to free it in unload */
-
- size = sizeof(struct iga_par) + sizeof(u32)*16;
-
- info = framebuffer_alloc(size, &pdev->dev);
- if (!info) {
- printk("igafb_init: can't alloc fb_info\n");
- pci_dev_put(pdev);
- return -ENOMEM;
- }
-
- par = info->par;
-
- if ((addr = pdev->resource[0].start) = 0) {
- printk("igafb_init: no memory start\n");
- kfree(info);
- pci_dev_put(pdev);
- return -ENXIO;
- }
-
- if ((info->screen_base = ioremap(addr, 1024*1024*2)) = 0) {
- printk("igafb_init: can't remap %lx[2M]\n", addr);
- kfree(info);
- pci_dev_put(pdev);
- return -ENXIO;
- }
-
- par->frame_buffer_phys = addr & PCI_BASE_ADDRESS_MEM_MASK;
-
-#ifdef CONFIG_SPARC
- /*
- * The following is sparc specific and this is why:
- *
- * IGS2000 has its I/O memory mapped and we want
- * to generate memory cycles on PCI, e.g. do ioremap(),
- * then readb/writeb() as in Documentation/io-mapping.txt.
- *
- * IGS1682 is more traditional, it responds to PCI I/O
- * cycles, so we want to access it with inb()/outb().
- *
- * On sparc, PCIC converts CPU memory access within
- * phys window 0x3000xxxx into PCI I/O cycles. Therefore
- * we may use readb/writeb to access them with IGS1682.
- *
- * We do not take io_base_phys from resource[n].start
- * on IGS1682 because that chip is BROKEN. It does not
- * have a base register for I/O. We just "know" what its
- * I/O addresses are.
- */
- if (iga2000) {
- igafb_fix.mmio_start = par->frame_buffer_phys | 0x00800000;
- } else {
- igafb_fix.mmio_start = 0x30000000; /* XXX */
- }
- if ((par->io_base = (int) ioremap(igafb_fix.mmio_start, igafb_fix.smem_len)) = 0) {
- printk("igafb_init: can't remap %lx[4K]\n", igafb_fix.mmio_start);
- iounmap((void *)info->screen_base);
- kfree(info);
- pci_dev_put(pdev);
- return -ENXIO;
- }
-
- /*
- * Figure mmap addresses from PCI config space.
- * We need two regions: for video memory and for I/O ports.
- * Later one can add region for video coprocessor registers.
- * However, mmap routine loops until size != 0, so we put
- * one additional region with size = 0.
- */
-
- par->mmap_map = kzalloc(4 * sizeof(*par->mmap_map), GFP_ATOMIC);
- if (!par->mmap_map) {
- printk("igafb_init: can't alloc mmap_map\n");
- iounmap((void *)par->io_base);
- iounmap(info->screen_base);
- kfree(info);
- pci_dev_put(pdev);
- return -ENOMEM;
- }
-
- /*
- * Set default vmode and cmode from PROM properties.
- */
- {
- struct device_node *dp = pci_device_to_OF_node(pdev);
- int node = dp->node;
- int width = prom_getintdefault(node, "width", 1024);
- int height = prom_getintdefault(node, "height", 768);
- int depth = prom_getintdefault(node, "depth", 8);
- switch (width) {
- case 1024:
- if (height = 768)
- default_var = default_var_1024x768;
- break;
- case 1152:
- if (height = 900)
- default_var = default_var_1152x900;
- break;
- case 1280:
- if (height = 1024)
- default_var = default_var_1280x1024;
- break;
- default:
- break;
- }
-
- switch (depth) {
- case 8:
- default_var.bits_per_pixel = 8;
- break;
- case 16:
- default_var.bits_per_pixel = 16;
- break;
- case 24:
- default_var.bits_per_pixel = 24;
- break;
- case 32:
- default_var.bits_per_pixel = 32;
- break;
- default:
- break;
- }
- }
-
-#endif
- igafb_fix.smem_start = (unsigned long) info->screen_base;
- igafb_fix.line_length = default_var.xres*(default_var.bits_per_pixel/8);
- igafb_fix.visual = default_var.bits_per_pixel <= 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
-
- info->var = default_var;
- info->fix = igafb_fix;
- info->pseudo_palette = (void *)(par + 1);
-
- if (!iga_init(info, par)) {
- iounmap((void *)par->io_base);
- iounmap(info->screen_base);
- kfree(par->mmap_map);
- kfree(info);
- return -ENODEV;
- }
-
-#ifdef CONFIG_SPARC
- /*
- * Add /dev/fb mmap values.
- */
-
- /* First region is for video memory */
- par->mmap_map[0].voff = 0x0;
- par->mmap_map[0].poff = par->frame_buffer_phys & PAGE_MASK;
- par->mmap_map[0].size = info->fix.smem_len & PAGE_MASK;
- par->mmap_map[0].prot_mask = SRMMU_CACHE;
- par->mmap_map[0].prot_flag = SRMMU_WRITE;
-
- /* Second region is for I/O ports */
- par->mmap_map[1].voff = par->frame_buffer_phys & PAGE_MASK;
- par->mmap_map[1].poff = info->fix.smem_start & PAGE_MASK;
- par->mmap_map[1].size = PAGE_SIZE * 2; /* X wants 2 pages */
- par->mmap_map[1].prot_mask = SRMMU_CACHE;
- par->mmap_map[1].prot_flag = SRMMU_WRITE;
-#endif /* CONFIG_SPARC */
-
- return 0;
-}
-
-static int __init igafb_setup(char *options)
-{
- char *this_opt;
-
- if (!options || !*options)
- return 0;
-
- while ((this_opt = strsep(&options, ",")) != NULL) {
- }
- return 0;
-}
-
-module_init(igafb_init);
-MODULE_LICENSE("GPL");
-static struct pci_device_id igafb_pci_tbl[] = {
- { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { }
-};
-
-MODULE_DEVICE_TABLE(pci, igafb_pci_tbl);
Index: b/include/video/iga.h
=================================--- a/include/video/iga.h 2017-10-02 15:08:27.654662470 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,24 +0,0 @@
-/* $Id: iga.h,v 1.2 1999/09/11 22:56:31 zaitcev Exp $
- * iga1682.h: Sparc/PCI iga1682 driver constants etc.
- *
- * Copyleft 1998 V. Roganov and G. Raiko
- */
-
-#ifndef _IGA1682_H
-#define _IGA1682_H 1
-
-#define IGA_ATTR_CTL 0x3C0
-#define IGA_IDX_VGA_OVERSCAN 0x11
-#define DAC_W_INDEX 0x03C8
-#define DAC_DATA 0x03C9
-#define IGA_EXT_CNTRL 0x3CE
-#define IGA_IDX_EXT_BUS_CNTL 0x30
-#define MEM_SIZE_ALIAS 0x3
-#define MEM_SIZE_1M 0x0
-#define MEM_SIZE_2M 0x1
-#define MEM_SIZE_4M 0x2
-#define MEM_SIZE_RESERVED 0x3
-#define IGA_IDX_OVERSCAN_COLOR 0x58
-#define IGA_IDX_EXT_MEM_2 0x72
-
-#endif /* !(_IGA1682_H) */
^ permalink raw reply [flat|nested] 5+ messages in thread