[PATCH v2 1/1] atmel_lcdfb: support native-mode display-timings

[PATCH v2 1/1] atmel_lcdfb: support native-mode display-timings

[Sam Ravnborg]

When a device tree set a display-timing using native-mode
then according to the bindings doc this should:

    native-mode:
    The native mode for the display, in case multiple
    modes are provided.
    When omitted, assume the first node is the native.

The atmel_lcdfb used the last timing subnode and did not
respect the timing mode specified with native-mode.

Introduce use of of_get_videomode() which allowed
a nice simplification of the code while also
added support for native-mode.

As a nice side-effect this fixes a memory leak where the
data used for timings and the display_np was not freed.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
---

v1 => v2
Rebased on top of v4.18, resend

 drivers/video/fbdev/atmel_lcdfb.c | 43 ++++++++-------------------------------
 1 file changed, 9 insertions(+), 34 deletions(-)

diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index 076d24afbd72..4ed55e6bbb84 100644
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <video/of_videomode.h>
 #include <video/of_display_timing.h>
 #include <linux/regulator/consumer.h>
 #include <video/videomode.h>
@@ -1028,11 +1029,11 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
 	struct device *dev = &sinfo->pdev->dev;
 	struct device_node *np Þv->of_node;
 	struct device_node *display_np;
-	struct device_node *timings_np;
-	struct display_timings *timings;
 	struct atmel_lcdfb_power_ctrl_gpio *og;
 	bool is_gpio_power = false;
+	struct fb_videomode fb_vm;
 	struct gpio_desc *gpiod;
+	struct videomode vm;
 	int ret = -ENOENT;
 	int i;
 
@@ -1105,44 +1106,18 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
 	pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight");
 	pdata->lcdcon_pol_negative = of_property_read_bool(display_np, "atmel,lcdcon-backlight-inverted");
 
-	timings = of_get_display_timings(display_np);
-	if (!timings) {
-		dev_err(dev, "failed to get display timings\n");
-		ret = -EINVAL;
+	ret = of_get_videomode(display_np, &vm, OF_USE_NATIVE_MODE);
+	if (ret) {
+		dev_err(dev, "failed to get videomode from DT\n");
 		goto put_display_node;
 	}
 
-	timings_np = of_get_child_by_name(display_np, "display-timings");
-	if (!timings_np) {
-		dev_err(dev, "failed to find display-timings node\n");
-		ret = -ENODEV;
+	ret = fb_videomode_from_videomode(&vm, &fb_vm);
+	if (ret < 0)
 		goto put_display_node;
-	}
 
-	for (i = 0; i < of_get_child_count(timings_np); i++) {
-		struct videomode vm;
-		struct fb_videomode fb_vm;
-
-		ret = videomode_from_timings(timings, &vm, i);
-		if (ret < 0)
-			goto put_timings_node;
-		ret = fb_videomode_from_videomode(&vm, &fb_vm);
-		if (ret < 0)
-			goto put_timings_node;
-
-		fb_add_videomode(&fb_vm, &info->modelist);
-	}
-
-	/*
-	 * FIXME: Make sure we are not referencing any fields in display_np
-	 * and timings_np and drop our references to them before returning to
-	 * avoid leaking the nodes on probe deferral and driver unbind.
-	 */
-
-	return 0;
+	fb_add_videomode(&fb_vm, &info->modelist);
 
-put_timings_node:
-	of_node_put(timings_np);
 put_display_node:
 	of_node_put(display_np);
 	return ret;
-- 
2.12.0

Re: [PATCH v2 1/1] atmel_lcdfb: support native-mode display-timings

[Bartlomiej Zolnierkiewicz]

On 08/25/2018 08:23 PM, Sam Ravnborg wrote:
> When a device tree set a display-timing using native-mode
> then according to the bindings doc this should:
> 
>     native-mode:
>     The native mode for the display, in case multiple
>     modes are provided.
>     When omitted, assume the first node is the native.
> 
> The atmel_lcdfb used the last timing subnode and did not
> respect the timing mode specified with native-mode.
> 
> Introduce use of of_get_videomode() which allowed
> a nice simplification of the code while also
> added support for native-mode.
> 
> As a nice side-effect this fixes a memory leak where the
> data used for timings and the display_np was not freed.
> 
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>

Patch queued for 4.20, thanks.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics