linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <syrjala@sci.fi>
To: Mikulas Patocka <mpatocka@redhat.com>
Cc: linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: Re: [PATCH 3/3] mach64: optimize wait_for_fifo
Date: Mon, 27 Aug 2018 12:55:30 +0000	[thread overview]
Message-ID: <20180827125530.GF11867@sci.fi> (raw)
In-Reply-To: <alpine.LRH.2.02.1808251551570.8284@file01.intranet.prod.int.rdu2.redhat.com>

On Sat, Aug 25, 2018 at 03:54:17PM -0400, Mikulas Patocka wrote:
> This is a simple optimization for fifo waiting that improves scrolling
> performance by 5%. If the queue has more free entries that what we
> consume, we can skip the costly register read next time.
> 
> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> 
> ---
>  drivers/video/fbdev/aty/atyfb.h        |   12 ++++++++----
>  drivers/video/fbdev/aty/mach64_accel.c |    4 +++-
>  2 files changed, 11 insertions(+), 5 deletions(-)
> 
> Index: linux-stable/drivers/video/fbdev/aty/atyfb.h
> =================================> --- linux-stable.orig/drivers/video/fbdev/aty/atyfb.h	2018-08-25 21:49:16.000000000 +0200
> +++ linux-stable/drivers/video/fbdev/aty/atyfb.h	2018-08-25 21:52:51.000000000 +0200
> @@ -147,6 +147,7 @@ struct atyfb_par {
>  	u16 pci_id;
>  	u32 accel_flags;
>  	int blitter_may_be_busy;
> +	unsigned fifo_space;
>  	int asleep;
>  	int lock_blank;
>  	unsigned long res_start;
> @@ -346,10 +347,13 @@ extern int aty_init_cursor(struct fb_inf
>       *  Hardware acceleration
>       */
>  
> -static inline void wait_for_fifo(u16 entries, const struct atyfb_par *par)
> +static inline void wait_for_fifo(u16 entries, struct atyfb_par *par)
>  {
> -	while ((aty_ld_le32(FIFO_STAT, par) & 0xffff) >
> -	       ((u32) (0x8000 >> entries)));
> +	unsigned fifo_space = par->fifo_space;
> +	while (entries > fifo_space) {
> +		fifo_space = 16 - fls(aty_ld_le32(FIFO_STAT, par) & 0xffff);

I don't recall off hand which way this register works, but based
on the existing code this looks correct.

Reviewed-by: Ville Syrjälä <syrjala@sci.fi>

> +	}
> +	par->fifo_space = fifo_space - entries;
>  }
>  
>  static inline void wait_for_idle(struct atyfb_par *par)
> @@ -359,7 +363,7 @@ static inline void wait_for_idle(struct
>  	par->blitter_may_be_busy = 0;
>  }
>  
> -extern void aty_reset_engine(const struct atyfb_par *par);
> +extern void aty_reset_engine(struct atyfb_par *par);
>  extern void aty_init_engine(struct atyfb_par *par, struct fb_info *info);
>  
>  void atyfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
> Index: linux-stable/drivers/video/fbdev/aty/mach64_accel.c
> =================================> --- linux-stable.orig/drivers/video/fbdev/aty/mach64_accel.c	2018-08-25 21:49:16.000000000 +0200
> +++ linux-stable/drivers/video/fbdev/aty/mach64_accel.c	2018-08-25 21:49:16.000000000 +0200
> @@ -37,7 +37,7 @@ static u32 rotation24bpp(u32 dx, u32 dir
>  	return ((rotation << 8) | DST_24_ROTATION_ENABLE);
>  }
>  
> -void aty_reset_engine(const struct atyfb_par *par)
> +void aty_reset_engine(struct atyfb_par *par)
>  {
>  	/* reset engine */
>  	aty_st_le32(GEN_TEST_CNTL,
> @@ -50,6 +50,8 @@ void aty_reset_engine(const struct atyfb
>  	/* HOST errors */
>  	aty_st_le32(BUS_CNTL,
>  		aty_ld_le32(BUS_CNTL, par) | BUS_HOST_ERR_ACK | BUS_FIFO_ERR_ACK, par);
> +
> +	par->fifo_space = 0;
>  }
>  
>  static void reset_GTC_3D_engine(const struct atyfb_par *par)

-- 
Ville Syrjälä
syrjala@sci.fi
http://www.sci.fi/~syrjala/

  reply	other threads:[~2018-08-27 12:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-25 19:54 [PATCH 3/3] mach64: optimize wait_for_fifo Mikulas Patocka
2018-08-27 12:55 ` Ville Syrjälä [this message]
2018-10-08 10:38   ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180827125530.GF11867@sci.fi \
    --to=syrjala@sci.fi \
    --cc=b.zolnierkie@samsung.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=mpatocka@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).