From: Grzegorz Halat <ghalat@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>,
linux-fbdev@vger.kernel.org,
Oleksandr Natalenko <oleksandr@redhat.com>,
Grzegorz Halat <ghalat@redhat.com>
Subject: [PATCH] vt/fbcon: deinitialize resources in visual_init() after failed memory allocation
Date: Fri, 26 Apr 2019 14:59:46 +0000 [thread overview]
Message-ID: <20190426145946.26537-1-ghalat@redhat.com> (raw)
After memory allocation failure vc_allocate() doesn't clean up data
which has been initialized in visual_init(). In case of fbcon this
leads to divide-by-0 in fbcon_init() on next open of the same tty.
memory allocation in vc_allocate() may fail here:
1097: vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL);
on next open() fbcon_init() skips vc_font.data initialization:
1088: if (!p->fontdata) {
division by zero in fbcon_init() happens here:
1149: new_cols /= vc->vc_font.width;
Additional check is needed in fbcon_deinit() to prevent
usage of uninitialized vc_screenbuf:
1251: if (vc->vc_hi_font_mask && vc->vc_screenbuf)
1252: set_vc_hi_font(vc, false);
Crash:
#6 [ffffc90001eafa60] divide_error at ffffffff81a00be4
[exception RIP: fbcon_init+463]
RIP: ffffffff814b860f RSP: ffffc90001eafb18 RFLAGS: 00010246
...
#7 [ffffc90001eafb60] visual_init at ffffffff8154c36e
#8 [ffffc90001eafb80] vc_allocate at ffffffff8154f53c
#9 [ffffc90001eafbc8] con_install at ffffffff8154f624
...
Signed-off-by: Grzegorz Halat <ghalat@redhat.com>
---
drivers/tty/vt/vt.c | 11 +++++++++--
drivers/video/fbdev/core/fbcon.c | 2 +-
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 650c66886c80..ec85d195678f 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1056,6 +1056,13 @@ static void visual_init(struct vc_data *vc, int num, int init)
vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row;
}
+
+static void visual_deinit(struct vc_data *vc)
+{
+ vc->vc_sw->con_deinit(vc);
+ module_put(vc->vc_sw->owner);
+}
+
int vc_allocate(unsigned int currcons) /* return 0 on success */
{
struct vt_notifier_param param;
@@ -1103,6 +1110,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */
return 0;
err_free:
+ visual_deinit(vc);
kfree(vc);
vc_cons[currcons].d = NULL;
return -ENOMEM;
@@ -1331,9 +1339,8 @@ struct vc_data *vc_deallocate(unsigned int currcons)
param.vc = vc = vc_cons[currcons].d;
atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, ¶m);
vcs_remove_sysfs(currcons);
- vc->vc_sw->con_deinit(vc);
+ visual_deinit(vc);
put_pid(vc->vt_pid);
- module_put(vc->vc_sw->owner);
vc_uniscr_set(vc, NULL);
kfree(vc->vc_screenbuf);
vc_cons[currcons].d = NULL;
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index cd059a801662..c59b23f6e9ba 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -1248,7 +1248,7 @@ static void fbcon_deinit(struct vc_data *vc)
if (free_font)
vc->vc_font.data = NULL;
- if (vc->vc_hi_font_mask)
+ if (vc->vc_hi_font_mask && vc->vc_screenbuf)
set_vc_hi_font(vc, false);
if (!con_is_bound(&fb_con))
--
2.20.1
next reply other threads:[~2019-04-26 14:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20190426145959epcas3p452b4b80025c58916331820abbb0060ed@epcas3p4.samsung.com>
2019-04-26 14:59 ` Grzegorz Halat [this message]
2019-05-16 14:33 ` [PATCH] vt/fbcon: deinitialize resources in visual_init() after failed memory allocation Grzegorz Halat
2019-05-24 8:06 ` Greg Kroah-Hartman
2019-05-24 13:52 ` Grzegorz Halat
2019-05-24 15:08 ` Greg Kroah-Hartman
2019-05-17 11:24 ` Bartlomiej Zolnierkiewicz
[not found] <20190426144357.25826-1-ghalat@redhat.com>
2019-05-21 6:27 ` Oleksandr Natalenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190426145946.26537-1-ghalat@redhat.com \
--to=ghalat@redhat.com \
--cc=b.zolnierkie@samsung.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oleksandr@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).