From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Thompson Date: Mon, 20 May 2019 13:30:07 +0000 Subject: Re: [PATCH] dt-bindings: backlight: lm3630a: correct schema validation Message-Id: <20190520133007.gymbonmq635gp73b@holly.lan> List-Id: References: <20190520085846.22320-1-masneyb@onstation.org> In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Rob Herring Cc: Brian Masney , Lee Jones , Jingoo Han , Jacek Anaszewski , Pavel Machek , Mark Rutland , Bartlomiej Zolnierkiewicz , dri-devel , Linux LED Subsystem , devicetree@vger.kernel.org, "linux-kernel@vger.kernel.org" , Linux Fbdev development list , Dan Murphy , Jonathan Marek On Mon, May 20, 2019 at 08:14:03AM -0500, Rob Herring wrote: > On Mon, May 20, 2019 at 3:59 AM Brian Masney wrote: > > > > The '#address-cells' and '#size-cells' properties were not defined in > > the lm3630a bindings and would cause the following error when > > attempting to validate the examples against the schema: > > > > Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: > > '#address-cells', '#size-cells' do not match any of the regexes: > > '^led@[01]$', 'pinctrl-[0-9]+' > > > > Correct this by adding those two properties. > > > > While we're here, move the ti,linear-mapping-mode property to the > > led@[01] child nodes to correct the following validation error: > > > > Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: > > led@0: 'ti,linear-mapping-mode' does not match any of the regexes: > > 'pinctrl-[0-9]+' > > > > Fixes: 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings") > > Signed-off-by: Brian Masney > > Reported-by: Rob Herring > > --- > > .../leds/backlight/lm3630a-backlight.yaml | 20 +++++++++++++------ > > 1 file changed, 14 insertions(+), 6 deletions(-) > > Reviewed-by: Rob Herring Acked-by: Daniel Thompson