From: Sam Ravnborg <sam@ravnborg.org>
To: Lee Jones <lee.jones@linaro.org>,
Daniel Thompson <daniel.thompson@linaro.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-fbdev@vger.kernel.org, "Jingoo Han" <jingoohan1@gmail.com>,
dri-devel@lists.freedesktop.org,
"Michał Mirosław" <mirq-linux@rere.qmqm.pl>,
"Gerd Hoffmann" <kraxel@redhat.com>,
"Daniel Vetter" <daniel.vetter@ffwll.ch>,
"Sam Ravnborg" <sam@ravnborg.org>,
"Peter Rosin" <peda@axentia.se>
Subject: [PATCH v1 1/1] backlight: drop EARLY_EVENT_BLANK support
Date: Thu, 25 Jul 2019 14:32:24 +0000 [thread overview]
Message-ID: <20190725143224.GB31803@ravnborg.org> (raw)
There was no users left - so drop the code to support EARLY_FB_BLANK.
This patch removes the support in backlight,
and drop the notifier in fbmem.
That EARLY_FB_BLANK is not used can be verified that no driver set any of:
lcd_ops.early_set_power()
lcd_ops.r_early_set_power()
Noticed while browsing backlight code for other reasons.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
---
Build tested with various architectures, configs.
Lee, Daniel - OK to commit to drm-misc-next where fbdev stuff is
maintained today?
Patch needs ack from Bartlomiej first of course.
Sam
drivers/video/backlight/lcd.c | 8 --------
drivers/video/fbdev/core/fbmem.c | 12 +-----------
include/linux/fb.h | 4 ----
include/linux/lcd.h | 10 ----------
4 files changed, 1 insertion(+), 33 deletions(-)
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index d6b653aa4ee9..78b033358625 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -39,14 +39,6 @@ static int fb_notifier_callback(struct notifier_block *self,
if (event = FB_EVENT_BLANK) {
if (ld->ops->set_power)
ld->ops->set_power(ld, *(int *)evdata->data);
- } else if (event = FB_EARLY_EVENT_BLANK) {
- if (ld->ops->early_set_power)
- ld->ops->early_set_power(ld,
- *(int *)evdata->data);
- } else if (event = FB_R_EARLY_EVENT_BLANK) {
- if (ld->ops->r_early_set_power)
- ld->ops->r_early_set_power(ld,
- *(int *)evdata->data);
} else {
if (ld->ops->set_mode)
ld->ops->set_mode(ld, evdata->data);
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index 00fe0efeaee9..e6a1c805064f 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1058,7 +1058,7 @@ int
fb_blank(struct fb_info *info, int blank)
{
struct fb_event event;
- int ret = -EINVAL, early_ret;
+ int ret = -EINVAL;
if (blank > FB_BLANK_POWERDOWN)
blank = FB_BLANK_POWERDOWN;
@@ -1066,21 +1066,11 @@ fb_blank(struct fb_info *info, int blank)
event.info = info;
event.data = ␣
- early_ret = fb_notifier_call_chain(FB_EARLY_EVENT_BLANK, &event);
-
if (info->fbops->fb_blank)
ret = info->fbops->fb_blank(blank, info);
if (!ret)
fb_notifier_call_chain(FB_EVENT_BLANK, &event);
- else {
- /*
- * if fb_blank is failed then revert effects of
- * the early blank event.
- */
- if (!early_ret)
- fb_notifier_call_chain(FB_R_EARLY_EVENT_BLANK, &event);
- }
return ret;
}
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 50948e519897..756706b666a1 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -135,10 +135,6 @@ struct fb_cursor_user {
/* A display blank is requested */
#define FB_EVENT_BLANK 0x09
-/* A hardware display blank early change occurred */
-#define FB_EARLY_EVENT_BLANK 0x10
-/* A hardware display blank revert early change occurred */
-#define FB_R_EARLY_EVENT_BLANK 0x11
struct fb_event {
struct fb_info *info;
diff --git a/include/linux/lcd.h b/include/linux/lcd.h
index 851eee8fff25..238fb1dfed98 100644
--- a/include/linux/lcd.h
+++ b/include/linux/lcd.h
@@ -41,16 +41,6 @@ struct lcd_ops {
/* Get the LCD panel power status (0: full on, 1..3: controller
power on, flat panel power off, 4: full off), see FB_BLANK_XXX */
int (*get_power)(struct lcd_device *);
- /*
- * Enable or disable power to the LCD(0: on; 4: off, see FB_BLANK_XXX)
- * and this callback would be called proir to fb driver's callback.
- *
- * P.S. note that if early_set_power is not NULL then early fb notifier
- * would be registered.
- */
- int (*early_set_power)(struct lcd_device *, int power);
- /* revert the effects of the early blank event. */
- int (*r_early_set_power)(struct lcd_device *, int power);
/* Enable or disable power to the LCD (0: on; 4: off, see FB_BLANK_XXX) */
int (*set_power)(struct lcd_device *, int power);
/* Get the current contrast setting (0-max_contrast) */
--
2.20.1
next reply other threads:[~2019-07-25 14:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20190725143232epcas2p3e9c37b4d946bc025375a5154ac60b5e8@epcas2p3.samsung.com>
2019-07-25 14:32 ` Sam Ravnborg [this message]
2019-07-25 14:39 ` [PATCH v1 1/1] backlight: drop EARLY_EVENT_BLANK support Daniel Vetter
2019-07-25 15:06 ` Lee Jones
2019-07-26 16:09 ` Sam Ravnborg
2019-08-05 10:35 ` Lee Jones
2019-07-26 9:50 ` Daniel Thompson
2019-07-26 11:27 ` Sam Ravnborg
2019-07-26 13:05 ` Daniel Thompson
2019-08-05 10:36 ` Lee Jones
2019-08-05 20:29 ` Sam Ravnborg
2019-07-26 16:05 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190725143224.GB31803@ravnborg.org \
--to=sam@ravnborg.org \
--cc=b.zolnierkie@samsung.com \
--cc=daniel.thompson@linaro.org \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jingoohan1@gmail.com \
--cc=kraxel@redhat.com \
--cc=lee.jones@linaro.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=mirq-linux@rere.qmqm.pl \
--cc=peda@axentia.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).