From: Javier Martinez Canillas <javierm@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Daniel Vetter" <daniel.vetter@ffwll.ch>,
"Geert Uytterhoeven" <geert@linux-m68k.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"Sam Ravnborg" <sam@ravnborg.org>,
dri-devel@lists.freedesktop.org,
"Maxime Ripard" <maxime@cerno.tech>,
"Noralf Trønnes" <noralf@tronnes.org>,
"Javier Martinez Canillas" <javierm@redhat.com>,
"Daniel Vetter" <daniel@ffwll.ch>,
"David Airlie" <airlied@linux.ie>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>
Subject: [PATCH v6 1/6] drm/format-helper: Add drm_fb_xrgb8888_to_gray8_line()
Date: Mon, 14 Feb 2022 14:37:05 +0100 [thread overview]
Message-ID: <20220214133710.3278506-2-javierm@redhat.com> (raw)
In-Reply-To: <20220214133710.3278506-1-javierm@redhat.com>
Pull the per-line conversion logic into a separate helper function.
This will allow to do line-by-line conversion in other helpers that
convert to a gray8 format.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
Changes in v6:
- Add Andy Shevchenko's Reviewed-by to patch #1.
Changes in v5:
- Add Thomas Zimmermann's Reviewed-by to patch #1.
Changes in v3:
- Add a drm_fb_xrgb8888_to_gray8_line() helper function (Thomas Zimmermann)
drivers/gpu/drm/drm_format_helper.c | 31 ++++++++++++++++++-----------
1 file changed, 19 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/drm_format_helper.c b/drivers/gpu/drm/drm_format_helper.c
index 0f28dd2bdd72..b981712623d3 100644
--- a/drivers/gpu/drm/drm_format_helper.c
+++ b/drivers/gpu/drm/drm_format_helper.c
@@ -464,6 +464,21 @@ void drm_fb_xrgb8888_to_xrgb2101010_toio(void __iomem *dst,
}
EXPORT_SYMBOL(drm_fb_xrgb8888_to_xrgb2101010_toio);
+static void drm_fb_xrgb8888_to_gray8_line(u8 *dst, const u32 *src, unsigned int pixels)
+{
+ unsigned int x;
+
+ for (x = 0; x < pixels; x++) {
+ u8 r = (*src & 0x00ff0000) >> 16;
+ u8 g = (*src & 0x0000ff00) >> 8;
+ u8 b = *src & 0x000000ff;
+
+ /* ITU BT.601: Y = 0.299 R + 0.587 G + 0.114 B */
+ *dst++ = (3 * r + 6 * g + b) / 10;
+ src++;
+ }
+}
+
/**
* drm_fb_xrgb8888_to_gray8 - Convert XRGB8888 to grayscale
* @dst: 8-bit grayscale destination buffer
@@ -484,8 +499,9 @@ EXPORT_SYMBOL(drm_fb_xrgb8888_to_xrgb2101010_toio);
void drm_fb_xrgb8888_to_gray8(void *dst, unsigned int dst_pitch, const void *vaddr,
const struct drm_framebuffer *fb, const struct drm_rect *clip)
{
- unsigned int len = (clip->x2 - clip->x1) * sizeof(u32);
- unsigned int x, y;
+ unsigned int linepixels = clip->x2 - clip->x1;
+ unsigned int len = linepixels * sizeof(u32);
+ unsigned int y;
void *buf;
u8 *dst8;
u32 *src32;
@@ -508,16 +524,7 @@ void drm_fb_xrgb8888_to_gray8(void *dst, unsigned int dst_pitch, const void *vad
for (y = clip->y1; y < clip->y2; y++) {
dst8 = dst;
src32 = memcpy(buf, vaddr, len);
- for (x = clip->x1; x < clip->x2; x++) {
- u8 r = (*src32 & 0x00ff0000) >> 16;
- u8 g = (*src32 & 0x0000ff00) >> 8;
- u8 b = *src32 & 0x000000ff;
-
- /* ITU BT.601: Y = 0.299 R + 0.587 G + 0.114 B */
- *dst8++ = (3 * r + 6 * g + b) / 10;
- src32++;
- }
-
+ drm_fb_xrgb8888_to_gray8_line(dst8, src32, linepixels);
vaddr += fb->pitches[0];
dst += dst_pitch;
}
--
2.34.1
next prev parent reply other threads:[~2022-02-14 13:37 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-14 13:37 [PATCH v6 0/6] drm: Add driver for Solomon SSD130x OLED displays Javier Martinez Canillas
2022-02-14 13:37 ` Javier Martinez Canillas [this message]
2022-02-16 9:16 ` [PATCH v6 1/6] drm/format-helper: Add drm_fb_xrgb8888_to_gray8_line() Maxime Ripard
2022-02-14 13:37 ` [PATCH v6 2/6] drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed() Javier Martinez Canillas
2022-02-16 9:16 ` Maxime Ripard
2022-03-08 16:13 ` Geert Uytterhoeven
2022-03-09 12:03 ` Javier Martinez Canillas
2022-02-14 13:37 ` [PATCH v6 3/6] drm: Add driver for Solomon SSD130x OLED displays Javier Martinez Canillas
2022-02-16 9:16 ` Maxime Ripard
2022-03-08 16:30 ` Geert Uytterhoeven
2022-03-09 12:14 ` Javier Martinez Canillas
2022-03-09 12:56 ` Geert Uytterhoeven
2022-03-09 13:43 ` Javier Martinez Canillas
2022-03-09 20:04 ` Geert Uytterhoeven
2022-03-09 20:13 ` Javier Martinez Canillas
2022-02-14 13:37 ` [PATCH v6 4/6] drm/solomon: Add SSD130x OLED displays I2C support Javier Martinez Canillas
2022-02-16 9:17 ` Maxime Ripard
2022-02-14 13:39 ` [PATCH v6 5/6] MAINTAINERS: Add entry for Solomon SSD130x OLED displays DRM driver Javier Martinez Canillas
2022-02-16 9:17 ` Maxime Ripard
2022-02-14 13:39 ` [PATCH v6 6/6] dt-bindings: display: ssd1307fb: Add myself as binding co-maintainer Javier Martinez Canillas
2022-02-16 9:17 ` Maxime Ripard
2022-02-16 12:34 ` [PATCH v6 0/6] drm: Add driver for Solomon SSD130x OLED displays Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220214133710.3278506-2-javierm@redhat.com \
--to=javierm@redhat.com \
--cc=airlied@linux.ie \
--cc=andriy.shevchenko@linux.intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert@linux-m68k.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=maxime@cerno.tech \
--cc=mripard@kernel.org \
--cc=noralf@tronnes.org \
--cc=sam@ravnborg.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).