linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Zimmermann <tzimmermann@suse.de>
To: javierm@redhat.com, deller@gmx.de, daniel@ffwll.ch,
	sam@ravnborg.org, maxime@cerno.tech
Cc: linux-fbdev@vger.kernel.org, linux-staging@lists.linux.dev,
	dri-devel@lists.freedesktop.org,
	Thomas Zimmermann <tzimmermann@suse.de>
Subject: [PATCH v2 02/11] fbdev/vga16fb: Create EGA/VGA devices in sysfb code
Date: Mon, 18 Jul 2022 09:23:13 +0200	[thread overview]
Message-ID: <20220718072322.8927-3-tzimmermann@suse.de> (raw)
In-Reply-To: <20220718072322.8927-1-tzimmermann@suse.de>

Move the device-creation from vga16fb to sysfb code. The driver's
videomode checks are independent from device creation, so move them
into vga16fb's probe function. This will allow to create the module
init/exit code automatically.

The vga16fb driver requires a screen_info for type VIDEO_TYPE_VGAC
or VIDEO_TYPE_EGAC. Such code is nowhere present in the kernel, except
for some MIPS systems. It's not clear if the vga16fb driver actually
works in practice.

v2:
	* keep driver name to "vga16fb" (Javier)
	* give rational for moving mode checks (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
---
 drivers/firmware/sysfb.c      |  4 +++
 drivers/video/fbdev/vga16fb.c | 57 +++++++++++++++++------------------
 2 files changed, 31 insertions(+), 30 deletions(-)

diff --git a/drivers/firmware/sysfb.c b/drivers/firmware/sysfb.c
index 1f276f108cc9..3fd3563d962b 100644
--- a/drivers/firmware/sysfb.c
+++ b/drivers/firmware/sysfb.c
@@ -94,6 +94,10 @@ static __init int sysfb_init(void)
 		name = "efi-framebuffer";
 	else if (si->orig_video_isVGA == VIDEO_TYPE_VLFB)
 		name = "vesa-framebuffer";
+	else if (si->orig_video_isVGA == VIDEO_TYPE_VGAC)
+		name = "vga-framebuffer";
+	else if (si->orig_video_isVGA == VIDEO_TYPE_EGAC)
+		name = "ega-framebuffer";
 	else
 		name = "platform-framebuffer";
 
diff --git a/drivers/video/fbdev/vga16fb.c b/drivers/video/fbdev/vga16fb.c
index faf76972114d..9e614c1db03d 100644
--- a/drivers/video/fbdev/vga16fb.c
+++ b/drivers/video/fbdev/vga16fb.c
@@ -185,19 +185,19 @@ static inline void setindex(int index)
 }
 
 /* Check if the video mode is supported by the driver */
-static inline int check_mode_supported(void)
+static inline int check_mode_supported(const struct screen_info *si)
 {
 	/* non-x86 architectures treat orig_video_isVGA as a boolean flag */
 #if defined(CONFIG_X86)
 	/* only EGA and VGA in 16 color graphic mode are supported */
-	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EGAC &&
-	    screen_info.orig_video_isVGA != VIDEO_TYPE_VGAC)
+	if (si->orig_video_isVGA != VIDEO_TYPE_EGAC &&
+	    si->orig_video_isVGA != VIDEO_TYPE_VGAC)
 		return -ENODEV;
 
-	if (screen_info.orig_video_mode != 0x0D &&	/* 320x200/4 (EGA) */
-	    screen_info.orig_video_mode != 0x0E &&	/* 640x200/4 (EGA) */
-	    screen_info.orig_video_mode != 0x10 &&	/* 640x350/4 (EGA) */
-	    screen_info.orig_video_mode != 0x12)	/* 640x480/4 (VGA) */
+	if (si->orig_video_mode != 0x0D &&	/* 320x200/4 (EGA) */
+	    si->orig_video_mode != 0x0E &&	/* 640x200/4 (EGA) */
+	    si->orig_video_mode != 0x10 &&	/* 640x350/4 (EGA) */
+	    si->orig_video_mode != 0x12)	/* 640x480/4 (VGA) */
 		return -ENODEV;
 #endif
 	return 0;
@@ -1321,11 +1321,20 @@ static int __init vga16fb_setup(char *options)
 
 static int vga16fb_probe(struct platform_device *dev)
 {
+	struct screen_info *si;
 	struct fb_info *info;
 	struct vga16fb_par *par;
 	int i;
 	int ret = 0;
 
+	si = dev_get_platdata(&dev->dev);
+	if (!si)
+		return -ENODEV;
+
+	ret = check_mode_supported(si);
+	if (ret)
+		return ret;
+
 	printk(KERN_DEBUG "vga16fb: initializing\n");
 	info = framebuffer_alloc(sizeof(struct vga16fb_par), &dev->dev);
 
@@ -1352,10 +1361,10 @@ static int vga16fb_probe(struct platform_device *dev)
 	par = info->par;
 
 #if defined(CONFIG_X86)
-	par->isVGA = screen_info.orig_video_isVGA == VIDEO_TYPE_VGAC;
+	par->isVGA = si->orig_video_isVGA == VIDEO_TYPE_VGAC;
 #else
 	/* non-x86 architectures treat orig_video_isVGA as a boolean flag */
-	par->isVGA = screen_info.orig_video_isVGA;
+	par->isVGA = si->orig_video_isVGA;
 #endif
 	par->palette_blanked = 0;
 	par->vesa_blanked = 0;
@@ -1425,16 +1434,21 @@ static int vga16fb_remove(struct platform_device *dev)
 	return 0;
 }
 
+static const struct platform_device_id vga16fb_driver_id_table[] = {
+	{"ega-framebuffer", 0},
+	{"vga-framebuffer", 0},
+	{ }
+};
+
 static struct platform_driver vga16fb_driver = {
 	.probe = vga16fb_probe,
 	.remove = vga16fb_remove,
 	.driver = {
 		.name = "vga16fb",
 	},
+	.id_table = vga16fb_driver_id_table,
 };
 
-static struct platform_device *vga16fb_device;
-
 static int __init vga16fb_init(void)
 {
 	int ret;
@@ -1447,32 +1461,15 @@ static int __init vga16fb_init(void)
 	vga16fb_setup(option);
 #endif
 
-	ret = check_mode_supported();
+	ret = platform_driver_register(&vga16fb_driver);
 	if (ret)
 		return ret;
 
-	ret = platform_driver_register(&vga16fb_driver);
-
-	if (!ret) {
-		vga16fb_device = platform_device_alloc("vga16fb", 0);
-
-		if (vga16fb_device)
-			ret = platform_device_add(vga16fb_device);
-		else
-			ret = -ENOMEM;
-
-		if (ret) {
-			platform_device_put(vga16fb_device);
-			platform_driver_unregister(&vga16fb_driver);
-		}
-	}
-
-	return ret;
+	return 0;
 }
 
 static void __exit vga16fb_exit(void)
 {
-	platform_device_unregister(vga16fb_device);
 	platform_driver_unregister(&vga16fb_driver);
 }
 
-- 
2.36.1


  reply	other threads:[~2022-07-18  7:23 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-18  7:23 [PATCH v2 00/11] fbdev: Maintain device ownership with aperture helpers Thomas Zimmermann
2022-07-18  7:23 ` Thomas Zimmermann [this message]
2022-07-18  7:23 ` [PATCH v2 03/11] fbdev/vga16fb: Auto-generate module init/exit code Thomas Zimmermann
2022-07-18  7:23 ` [PATCH v2 04/11] fbdev/core: Remove remove_conflicting_pci_framebuffers() Thomas Zimmermann
2022-07-18  7:23 ` [PATCH v2 05/11] fbdev: Convert drivers to aperture helpers Thomas Zimmermann
2022-07-18  9:57   ` kernel test robot
2022-07-18  7:23 ` [PATCH v2 06/11] fbdev: Remove conflicting devices on PCI bus Thomas Zimmermann
2022-07-21 14:17   ` Geert Uytterhoeven
2022-07-18  7:23 ` [PATCH v2 07/11] video/aperture: Disable and unregister sysfb devices via aperture helpers Thomas Zimmermann
2023-03-20  1:47   ` Samuel Čavoj
2023-03-20  9:46     ` Thomas Zimmermann
2023-03-20 10:13       ` Javier Martinez Canillas
2023-03-20 11:08         ` Samuel Čavoj
2023-03-20 12:12           ` Javier Martinez Canillas
2023-03-28 15:19             ` Samuel Čavoj
2023-04-04 11:36               ` Javier Martinez Canillas
2022-07-18  7:23 ` [PATCH v2 08/11] video: Provide constants for VGA I/O range Thomas Zimmermann
2022-07-18  7:23 ` [PATCH v2 09/11] video/aperture: Remove conflicting VGA devices, if any Thomas Zimmermann
2022-07-18  7:23 ` [PATCH v2 10/11] fbdev: Acquire framebuffer apertures for firmware devices Thomas Zimmermann
2022-07-18  7:23 ` [PATCH v2 11/11] fbdev: Remove conflict-handling code Thomas Zimmermann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220718072322.8927-3-tzimmermann@suse.de \
    --to=tzimmermann@suse.de \
    --cc=daniel@ffwll.ch \
    --cc=deller@gmx.de \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=javierm@redhat.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=maxime@cerno.tech \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).