* [PATCH v3 01/10] dt-bindings: iio: adc: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
@ 2022-08-16 12:43 ` Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 02/10] dt-bindings: iio: accel: " Krzysztof Kozlowski
` (9 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2022-08-16 12:43 UTC (permalink / raw)
To: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Rob Herring, Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
Cc: Krzysztof Kozlowski
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---
.../bindings/iio/adc/adi,ad7124.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7192.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7280a.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7292.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7298.yaml | 6 +++--
.../bindings/iio/adc/adi,ad7476.yaml | 8 +++---
.../bindings/iio/adc/adi,ad7606.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7768-1.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7923.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7949.yaml | 7 ++---
.../bindings/iio/adc/holt,hi8435.yaml | 7 ++---
.../bindings/iio/adc/lltc,ltc2496.yaml | 8 +++---
.../bindings/iio/adc/maxim,max1027.yaml | 5 +++-
.../bindings/iio/adc/maxim,max11100.yaml | 7 +++--
.../bindings/iio/adc/maxim,max1118.yaml | 26 ++++++++++---------
.../bindings/iio/adc/maxim,max1241.yaml | 7 ++---
.../bindings/iio/adc/microchip,mcp3201.yaml | 6 +++--
.../bindings/iio/adc/microchip,mcp3911.yaml | 5 +++-
.../bindings/iio/adc/ti,adc0832.yaml | 7 ++---
.../bindings/iio/adc/ti,adc084s021.yaml | 7 ++---
.../bindings/iio/adc/ti,adc108s102.yaml | 6 +++--
.../bindings/iio/adc/ti,adc12138.yaml | 7 ++---
.../bindings/iio/adc/ti,adc128s052.yaml | 7 ++---
.../bindings/iio/adc/ti,adc161s626.yaml | 7 ++---
.../bindings/iio/adc/ti,ads124s08.yaml | 7 ++---
.../bindings/iio/adc/ti,ads131e08.yaml | 7 ++---
.../bindings/iio/adc/ti,ads8344.yaml | 7 ++---
.../bindings/iio/adc/ti,ads8688.yaml | 7 ++---
.../bindings/iio/adc/ti,tlc4541.yaml | 7 ++---
.../bindings/iio/adc/ti,tsc2046.yaml | 7 ++---
30 files changed, 131 insertions(+), 93 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index fb3d0dae9bae..75a7184a4735 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -52,8 +52,6 @@ properties:
avdd-supply:
description: avdd supply can be used as reference for conversion.
- spi-max-frequency: true
-
required:
- compatible
- reg
@@ -106,7 +104,10 @@ patternProperties:
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 22b7ed3723f6..cc347dade4ef 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -30,8 +30,6 @@ properties:
spi-cpha: true
- spi-max-frequency: true
-
clocks:
maxItems: 1
description: phandle to the master clock (mclk)
@@ -94,7 +92,10 @@ required:
- spi-cpol
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
index a694d5794d4a..dfb8f305e2f0 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
@@ -28,8 +28,6 @@ properties:
description: IRQ line for the ADC
maxItems: 1
- spi-max-frequency: true
-
adi,voltage-alert-last-chan:
$ref: /schemas/types.yaml#/definitions/uint32
description:
@@ -55,7 +53,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index a3e39a40c9b3..1bfbeed6f299 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -30,8 +30,6 @@ properties:
spi-cpha: true
- spi-max-frequency: true
-
'#address-cells':
const: 1
@@ -65,7 +63,10 @@ patternProperties:
additionalProperties: true
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
index ca414bb396c5..cd8ac5162d27 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
@@ -24,13 +24,15 @@ properties:
vref-supply: true
vdd-supply: true
- spi-max-frequency: true
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
index 666414a9c0de..44c671eeda73 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -66,8 +66,6 @@ properties:
to the other supplies. Needed to be able to establish channel scaling
unless there is also an internal reference available (e.g. ad7091r)
- spi-max-frequency: true
-
adi,conversion-start-gpios:
description: A GPIO used to trigger the start of a conversion
maxItems: 1
@@ -76,9 +74,9 @@ required:
- compatible
- reg
-additionalProperties: false
-
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
# Devices where reference is vcc
- if:
properties:
@@ -158,6 +156,8 @@ allOf:
properties:
adi,conversion-start-gpios: false
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 516fc24d3346..ac5a47c8f070 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -32,8 +32,6 @@ properties:
spi-cpol: true
- spi-max-frequency: true
-
avcc-supply: true
interrupts:
@@ -105,7 +103,10 @@ required:
- interrupts
- adi,conversion-start-gpios
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index a85a28145ef6..3ce59d4d065f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -50,8 +50,6 @@ properties:
reset-gpios:
maxItems: 1
- spi-max-frequency: true
-
spi-cpol: true
spi-cpha: true
@@ -88,7 +86,10 @@ patternProperties:
- reg
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
index e82194974eea..24a810c23197 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
@@ -43,13 +43,14 @@ properties:
'#size-cells':
const: 0
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
index 0b10ed5f74ae..9ee4d977c5ed 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -49,8 +49,6 @@ properties:
default: 4096000
- spi-max-frequency: true
-
'#io-channel-cells':
const: 1
@@ -64,7 +62,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
index 52490cbb0af0..56bcbe5dcd79 100644
--- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
@@ -24,8 +24,6 @@ properties:
GPIO used for controlling the reset pin
maxItems: 1
- spi-max-frequency: true
-
"#io-channel-cells":
const: 1
@@ -33,7 +31,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 0bd2fc0356c8..5207c919abe0 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -22,15 +22,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency:
- description: maximal spi bus frequency supported
-
required:
- compatible
- vref-supply
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
index 46b7747076b9..d0a7ed26d9ea 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
@@ -45,7 +45,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
index 0cf87556ef82..4f74cb33383a 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
@@ -26,13 +26,16 @@ properties:
minimum: 100000
maximum: 4800000
-additionalProperties: false
-
required:
- compatible
- reg
- vref-supply
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
index e948b3e37b0c..bb336e33ebe2 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
@@ -28,23 +28,25 @@ properties:
vref-supply:
description: External reference, needed to establish input scaling
-if:
- properties:
- compatible:
- contains:
- const: maxim,max1118
-then:
- required:
- - vref-supply
-else:
- properties:
- vref-supply: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: maxim,max1118
+ then:
+ required:
+ - vref-supply
+ else:
+ properties:
+ vref-supply: false
required:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index 4c7e0d94bff1..58b12fe8070c 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -39,15 +39,16 @@ properties:
thus enabling power-down mode.
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
- vdd-supply
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
index fcc1ba53b20d..18108f0f3731 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
@@ -32,7 +32,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
spi-cpol: true
@@ -51,7 +50,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 95ab285f4eba..067a7bbadab8 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -51,7 +51,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
index f5a923cc847f..686721176a58 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
@@ -24,8 +24,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: External reference, needed to establish input scaling
@@ -37,7 +35,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
index 1a113b30a414..726d2cbfa368 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
@@ -19,8 +19,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: External reference, needed to establish input scaling
@@ -37,7 +35,10 @@ required:
- spi-cpol
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
index ae5ce60987fe..9b072b057f16 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -19,7 +19,6 @@ properties:
reg: true
vref-supply: true
- spi-max-frequency: true
"#io-channel-cells":
const: 1
@@ -28,7 +27,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
index ec3b2edf1fb7..076088a328c3 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
@@ -31,8 +31,6 @@ properties:
maxItems: 1
description: Conversion clock input.
- spi-max-frequency: true
-
vref-p-supply:
description: The regulator supply for positive analog voltage reference
@@ -62,7 +60,10 @@ required:
- clocks
- vref-p-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
index d54a0183f024..775eee972b12 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
@@ -27,8 +27,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply: true
"#io-channel-cells":
@@ -39,7 +37,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
index 3f4f334d6f73..afe782522904 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
@@ -21,8 +21,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vdda-supply: true
"#io-channel-cells":
@@ -32,7 +30,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
index 2e6abc9d746a..56a3f1766aab 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
@@ -18,8 +18,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
spi-cpha: true
reset-gpios:
@@ -32,7 +30,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
index e0670e3fbb72..5882de6fd967 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
@@ -28,8 +28,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
spi-cpha: true
clocks:
@@ -120,7 +118,10 @@ patternProperties:
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
index b8c398187d5c..f75b2c702986 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
@@ -19,8 +19,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: Supply the 2.5V or 5V reference voltage
@@ -32,7 +30,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
index a0af4b24877f..f26fdbc15f84 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
@@ -25,13 +25,14 @@ properties:
description: Optional external reference. If not supplied, assume
REFSEL input tied low to enable the internal reference.
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
index 6c2539b3d707..314d1d99bf73 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
@@ -21,8 +21,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply: true
"#io-channel-cells":
@@ -33,7 +31,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
index 601d69971d84..0b48814c0dc2 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@@ -23,8 +23,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
"#io-channel-cells":
const: 1
@@ -59,7 +57,10 @@ patternProperties:
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 01/10] dt-bindings: iio: adc: " Krzysztof Kozlowski
@ 2022-08-16 12:43 ` Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 03/10] dt-bindings: iio: amplifiers: adi,ada4250: " Krzysztof Kozlowski
` (8 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2022-08-16 12:43 UTC (permalink / raw)
To: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Rob Herring, Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
Cc: Krzysztof Kozlowski
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/iio/accel/adi,adis16201.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/adi,adis16240.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/adi,adxl313.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/adi,adxl345.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/adi,adxl355.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/adi,adxl367.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/adi,adxl372.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/bosch,bma220.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/bosch,bma255.yaml | 5 ++++-
.../devicetree/bindings/iio/accel/bosch,bmi088.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/fsl,mma7455.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/kionix,kxsd9.yaml | 7 ++++---
.../devicetree/bindings/iio/accel/murata,sca3300.yaml | 5 ++++-
.../devicetree/bindings/iio/accel/nxp,fxls8962af.yaml | 7 ++++---
14 files changed, 56 insertions(+), 38 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
index 6f8f8a6258fe..7332442e5661 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -27,15 +27,16 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index 8d829ef878bc..f6f97164c2ca 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -25,14 +25,15 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
index d6afc1b8c272..05fa7af409cc 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -24,8 +24,6 @@ properties:
spi-3wire: true
- spi-max-frequency: true
-
vs-supply:
description: Regulator that supplies power to the accelerometer
@@ -48,7 +46,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 9bb039e2f533..346abfb13a3a 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -32,8 +32,6 @@ properties:
spi-cpol: true
- spi-max-frequency: true
-
interrupts:
maxItems: 1
@@ -42,7 +40,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
index ba54d6998f2e..14b487088ab4 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -45,13 +45,14 @@ properties:
vddio-supply:
description: Regulator that provides power to the bus
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
index d259e796c1d6..f10d98d34cb8 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
@@ -35,8 +35,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vddio-supply: true
@@ -45,7 +43,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 38b59b6454ce..73a5c8f814cc 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -25,14 +25,15 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
index 942b23ad0712..5dd06f5905b4 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -20,8 +20,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdda-supply: true
vddd-supply: true
vddio-supply: true
@@ -30,7 +28,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
index 478e75ae0885..457a709b583c 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -72,7 +72,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
index 272eb48eef5a..3cb82576d758 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -24,8 +24,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vddio-supply: true
@@ -50,7 +48,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
index 9c7c66feeffc..c8659c5eba2a 100644
--- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
@@ -39,13 +39,14 @@ properties:
- "INT1"
- "INT2"
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
index 390b87242fcb..f64d99b35492 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -29,13 +29,14 @@ properties:
mount-matrix:
description: an optional 3x3 mounting rotation matrix.
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
index f6e2a16a710b..00c990caa1e4 100644
--- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
@@ -29,7 +29,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
index ad529ab2c6e2..65ce8ea14b52 100644
--- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -27,8 +27,6 @@ properties:
vdd-supply:
description: phandle to the regulator that provides power to the accelerometer
- spi-max-frequency: true
-
interrupts:
maxItems: 1
@@ -44,7 +42,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 03/10] dt-bindings: iio: amplifiers: adi,ada4250: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 01/10] dt-bindings: iio: adc: " Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 02/10] dt-bindings: iio: accel: " Krzysztof Kozlowski
@ 2022-08-16 12:43 ` Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 04/10] dt-bindings: iio: dac: " Krzysztof Kozlowski
` (7 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2022-08-16 12:43 UTC (permalink / raw)
To: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Rob Herring, Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
Cc: Krzysztof Kozlowski
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/iio/amplifiers/adi,ada4250.yaml | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
index 5277479be382..c15da155d300 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
@@ -27,14 +27,15 @@ properties:
Enable internal buffer to drive the reference pin.
type: boolean
- spi-max-frequency: true
-
required:
- compatible
- reg
- avdd-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 04/10] dt-bindings: iio: dac: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
` (2 preceding siblings ...)
2022-08-16 12:43 ` [PATCH v3 03/10] dt-bindings: iio: amplifiers: adi,ada4250: " Krzysztof Kozlowski
@ 2022-08-16 12:43 ` Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 05/10] dt-bindings: iio: frequency: adf4371: " Krzysztof Kozlowski
` (6 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2022-08-16 12:43 UTC (permalink / raw)
To: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Rob Herring, Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
Cc: Krzysztof Kozlowski
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/iio/dac/adi,ad5064.yaml | 7 +++----
.../devicetree/bindings/iio/dac/adi,ad5360.yaml | 7 +++----
.../devicetree/bindings/iio/dac/adi,ad5380.yaml | 9 +++++----
.../devicetree/bindings/iio/dac/adi,ad5421.yaml | 7 ++++---
.../devicetree/bindings/iio/dac/adi,ad5449.yaml | 7 +++----
.../devicetree/bindings/iio/dac/adi,ad5624r.yaml | 9 +++++----
.../devicetree/bindings/iio/dac/adi,ad5686.yaml | 9 +++++----
.../devicetree/bindings/iio/dac/adi,ad5755.yaml | 9 +++++----
.../devicetree/bindings/iio/dac/adi,ad5758.yaml | 4 ++--
.../devicetree/bindings/iio/dac/adi,ad5761.yaml | 7 +++----
.../devicetree/bindings/iio/dac/adi,ad5764.yaml | 7 +++----
.../devicetree/bindings/iio/dac/adi,ad5770r.yaml | 7 ++++---
.../devicetree/bindings/iio/dac/adi,ad5791.yaml | 9 +++++----
.../devicetree/bindings/iio/dac/adi,ad8801.yaml | 7 +++----
.../devicetree/bindings/iio/dac/microchip,mcp4922.yaml | 9 +++++----
.../devicetree/bindings/iio/dac/ti,dac082s085.yaml | 9 +++++----
.../devicetree/bindings/iio/dac/ti,dac7311.yaml | 7 ++++---
.../devicetree/bindings/iio/dac/ti,dac7612.yaml | 7 ++++---
18 files changed, 71 insertions(+), 66 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
index 05ed4e0ec364..c04165fa9259 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
@@ -95,15 +95,12 @@ properties:
vrefD-supply: true
vref-supply: true
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- # Shared external vref, no internal reference
if:
properties:
@@ -232,6 +229,8 @@ allOf:
- vrefA-supply
- vrefB-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
index 65f86f26947c..86e2884cdfb1 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
@@ -28,10 +28,6 @@ properties:
vref1-supply: true
vref2-supply: true
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
@@ -39,6 +35,7 @@ required:
- vref1-supply
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -63,6 +60,8 @@ allOf:
required:
- vref2-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
index d599b418a020..ff50c72c62b5 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
@@ -39,14 +39,15 @@ properties:
description:
If not supplied devices will use internal regulators.
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
index 188f656617e3..52d089ebde95 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
@@ -26,13 +26,14 @@ properties:
maxItems: 1
description: Fault signal.
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
index 044332c97743..d2af2d491986 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
@@ -27,19 +27,16 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
VREF-supply: true
VREFA-supply: true
VREFB-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -72,6 +69,8 @@ allOf:
- VREFA-supply
- VREFB-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
index 330383b85eeb..4d5111a5f9bd 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
@@ -22,17 +22,18 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: If not present, internal reference will be used.
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
index 5c26441eae9f..13f214234b8e 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@@ -53,14 +53,15 @@ properties:
vcc-supply:
description: If not supplied the internal reference is used.
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
index f866b88e1440..9a3c2926bf85 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
@@ -25,8 +25,6 @@ properties:
description: Either this or spi-cpol but not both.
spi-cpol: true
- spi-max-frequency: true
-
adi,ext-dc-dc-compenstation-resistor:
$ref: /schemas/types.yaml#/definitions/flag
description:
@@ -67,8 +65,6 @@ required:
- compatible
- reg
-additionalProperties: false
-
patternProperties:
"^channel@[0-7]$":
type: object
@@ -123,6 +119,11 @@ oneOf:
- required:
- spi-cpol
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
index fd4edca34a28..e49e7556175d 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
@@ -16,7 +16,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
adi,dc-dc-mode:
@@ -99,6 +98,7 @@ required:
- adi,dc-dc-mode
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
adi,dc-dc-mode:
@@ -115,7 +115,7 @@ allOf:
required:
- adi,range-microvolt
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
index 7f95a9ed55fe..df550b5af2f7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
@@ -22,18 +22,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: If not supplied, internal reference will be used.
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -45,6 +42,8 @@ allOf:
required:
- vref-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
index 8e893d52bfb1..0b409a727a43 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
@@ -22,18 +22,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vrefAB-supply: true
vrefCD-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -46,6 +43,8 @@ allOf:
- vrefAB-supply
- vrefCD-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index 24ac40180ac1..ca5432ffdedb 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -49,8 +49,6 @@ properties:
asserted during driver probe.
maxItems: 1
- spi-max-frequency: true
-
'#address-cells':
const: 1
@@ -138,7 +136,10 @@ required:
- channel@4
- channel@5
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index 650d1ebdcec3..3a84739736f6 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -23,19 +23,20 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vss-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
- vdd-supply
- vss-supply
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
index 6a3990a8d0ad..1849a2ff05c7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
@@ -19,19 +19,16 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vrefh-supply: true
vrefl-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
- vrefh-supply
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -44,6 +41,8 @@ allOf:
properties:
vrefl-supply: false
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
index 4c430abcdbf9..19374401e509 100644
--- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
@@ -21,17 +21,18 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
- vref-supply
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
index b0157050f1ee..201b04af2b22 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
@@ -33,21 +33,22 @@ properties:
vref-supply:
description: Needed to provide output scaling.
- spi-max-frequency: true
-
required:
- compatible
- reg
- vref-supply
-additionalProperties: false
-
oneOf:
- required:
- spi-cpha
- required:
- spi-cpol
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
vref_2v5_reg: regulator-vref {
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
index 10be98d1f19c..a6814587dbc4 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
@@ -24,14 +24,15 @@ properties:
Reference voltage must be supplied to establish the scaling of the
output voltage.
- spi-max-frequency: true
-
required:
- compatible
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
index d172b142f6ed..20dd1370660d 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
@@ -29,13 +29,14 @@ properties:
DACs are loaded when the pin connected to this GPIO is pulled low.
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 05/10] dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
` (3 preceding siblings ...)
2022-08-16 12:43 ` [PATCH v3 04/10] dt-bindings: iio: dac: " Krzysztof Kozlowski
@ 2022-08-16 12:43 ` Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 06/10] dt-bindings: iio: health: ti,afe4403: " Krzysztof Kozlowski
` (5 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2022-08-16 12:43 UTC (permalink / raw)
To: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Rob Herring, Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
Cc: Krzysztof Kozlowski
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/iio/frequency/adf4371.yaml | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 6b3a611e1cf1..0144f74a4768 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -40,15 +40,16 @@ properties:
output stage will shut down until the ADF4371/ADF4372 achieves lock as
measured by the digital lock detect circuitry.
- spi-max-frequency: true
-
required:
- compatible
- reg
- clocks
- clock-names
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 06/10] dt-bindings: iio: health: ti,afe4403: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
` (4 preceding siblings ...)
2022-08-16 12:43 ` [PATCH v3 05/10] dt-bindings: iio: frequency: adf4371: " Krzysztof Kozlowski
@ 2022-08-16 12:43 ` Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 07/10] dt-bindings: iio: imu: " Krzysztof Kozlowski
` (4 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2022-08-16 12:43 UTC (permalink / raw)
To: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Rob Herring, Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
Cc: Krzysztof Kozlowski
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/iio/health/ti,afe4403.yaml | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
index d861526c5c42..6c5ad426a016 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@@ -25,14 +25,15 @@ properties:
reset-gpios: true
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 07/10] dt-bindings: iio: imu: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
` (5 preceding siblings ...)
2022-08-16 12:43 ` [PATCH v3 06/10] dt-bindings: iio: health: ti,afe4403: " Krzysztof Kozlowski
@ 2022-08-16 12:43 ` Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 08/10] dt-bindings: iio: potentiometer: " Krzysztof Kozlowski
` (3 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2022-08-16 12:43 UTC (permalink / raw)
To: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Rob Herring, Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
Cc: Krzysztof Kozlowski
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/iio/imu/adi,adis16460.yaml | 7 ++++---
.../devicetree/bindings/iio/imu/adi,adis16480.yaml | 9 +++++----
.../devicetree/bindings/iio/imu/bosch,bmi160.yaml | 7 ++++---
.../devicetree/bindings/iio/imu/invensense,icm42600.yaml | 6 ++++--
.../devicetree/bindings/iio/imu/invensense,mpu6050.yaml | 5 ++---
.../devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 7 ++++---
.../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 9 +++++----
7 files changed, 28 insertions(+), 22 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 340be256f283..d166dbca18c3 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -25,8 +25,6 @@ properties:
spi-cpol: true
- spi-max-frequency: true
-
interrupts:
maxItems: 1
@@ -35,7 +33,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
index dd29dc6c4c19..56e0dc20f5e4 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
@@ -47,8 +47,6 @@ properties:
- DIO3
- DIO4
- spi-max-frequency: true
-
spi-cpha: true
spi-cpol: true
@@ -96,8 +94,6 @@ properties:
- DIO3
- DIO4
-additionalProperties: false
-
required:
- compatible
- reg
@@ -106,6 +102,11 @@ required:
- spi-cpol
- spi-max-frequency
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index 6e73cd889b5c..a0760382548d 100644
--- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -46,13 +46,14 @@ properties:
mount-matrix:
description: an optional 3x3 mounting rotation matrix
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 4c1c083d0e92..488349755c99 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -47,7 +47,6 @@ properties:
vddio-supply:
description: Regulator that provides power to the bus
- spi-max-frequency: true
spi-cpha: true
spi-cpol: true
@@ -56,7 +55,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 3ebc6526d82d..ec64d7877fe5 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -40,8 +40,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vddio-supply: true
@@ -54,6 +52,7 @@ properties:
These devices also support an auxiliary i2c bus via an i2c-gate.
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
not:
properties:
@@ -67,7 +66,7 @@ allOf:
properties:
i2c-gate: false
-additionalProperties: false
+unevaluatedProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 0203b83b8587..24416b59b782 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -36,13 +36,14 @@ properties:
drive-open-drain:
type: boolean
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index 5d4839f00898..0ceb29fb01b7 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -45,8 +45,6 @@ properties:
description:
Supports up to 2 interrupt lines via the INT1 and INT2 pins.
- spi-max-frequency: true
-
vdd-supply:
description: if defined provides VDD power to the sensor.
@@ -81,12 +79,15 @@ properties:
wakeup-source:
$ref: /schemas/types.yaml#/definitions/flag
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 08/10] dt-bindings: iio: potentiometer: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
` (6 preceding siblings ...)
2022-08-16 12:43 ` [PATCH v3 07/10] dt-bindings: iio: imu: " Krzysztof Kozlowski
@ 2022-08-16 12:43 ` Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 09/10] dt-bindings: iio: samsung,sensorhub-rinato: " Krzysztof Kozlowski
` (2 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2022-08-16 12:43 UTC (permalink / raw)
To: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Rob Herring, Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
Cc: Krzysztof Kozlowski
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/iio/potentiometer/microchip,mcp41010.yaml | 9 +++++----
.../bindings/iio/potentiometer/microchip,mcp4131.yaml | 9 +++++----
2 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
index 567697d996ec..87e88f2a9908 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
@@ -25,14 +25,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
index 32e92bced81f..896fe0b5edcc 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
@@ -80,14 +80,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 09/10] dt-bindings: iio: samsung,sensorhub-rinato: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
` (7 preceding siblings ...)
2022-08-16 12:43 ` [PATCH v3 08/10] dt-bindings: iio: potentiometer: " Krzysztof Kozlowski
@ 2022-08-16 12:43 ` Krzysztof Kozlowski
2022-08-16 12:43 ` [PATCH v3 10/10] dt-bindings: iio: temperature: " Krzysztof Kozlowski
2022-08-18 14:52 ` [PATCH v3 00/10] dt-bindings: iio: " Rob Herring
10 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2022-08-16 12:43 UTC (permalink / raw)
To: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Rob Herring, Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
Cc: Krzysztof Kozlowski
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/iio/samsung,sensorhub-rinato.yaml | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
index a88b3b14d6bd..dd2ae2bd1ad7 100644
--- a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
+++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
@@ -40,10 +40,6 @@ properties:
description:
Reset the sensorhub.
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
@@ -52,6 +48,11 @@ required:
- mcu-ap-gpios
- mcu-reset-gpios
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 10/10] dt-bindings: iio: temperature: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
` (8 preceding siblings ...)
2022-08-16 12:43 ` [PATCH v3 09/10] dt-bindings: iio: samsung,sensorhub-rinato: " Krzysztof Kozlowski
@ 2022-08-16 12:43 ` Krzysztof Kozlowski
2022-08-18 14:52 ` [PATCH v3 00/10] dt-bindings: iio: " Rob Herring
10 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2022-08-16 12:43 UTC (permalink / raw)
To: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Rob Herring, Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
Cc: Krzysztof Kozlowski
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/iio/temperature/maxim,max31855k.yaml | 4 ++--
.../devicetree/bindings/iio/temperature/maxim,max31856.yaml | 6 ++++--
.../devicetree/bindings/iio/temperature/maxim,max31865.yaml | 6 ++++--
3 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
index 9969bac66aa1..0805ed7e2113 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
@@ -32,7 +32,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
required:
@@ -40,6 +39,7 @@ required:
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -53,7 +53,7 @@ allOf:
properties:
spi-cpha: false
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
index 873b34766676..228a94165487 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
@@ -19,7 +19,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
thermocouple-type:
@@ -34,7 +33,10 @@ required:
- reg
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index aafb33b16549..a2823ed6867b 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -25,7 +25,6 @@ properties:
enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection.
type: boolean
- spi-max-frequency: true
spi-cpha: true
required:
@@ -33,7 +32,10 @@ required:
- reg
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
2022-08-16 12:43 [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
` (9 preceding siblings ...)
2022-08-16 12:43 ` [PATCH v3 10/10] dt-bindings: iio: temperature: " Krzysztof Kozlowski
@ 2022-08-18 14:52 ` Rob Herring
2022-08-19 18:41 ` Jonathan Cameron
10 siblings, 1 reply; 13+ messages in thread
From: Rob Herring @ 2022-08-18 14:52 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Lars-Peter Clausen, Michael Hennerich, Jonathan Cameron,
Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
On Tue, Aug 16, 2022 at 03:43:11PM +0300, Krzysztof Kozlowski wrote:
> Hi,
>
> The patchset is independent of my other recent changes around SPI, so feel free
> to apply it for next release.
>
> Changes since v2
> ================
> 1. Keep spi-3wire also in device bindings (not in spi-peripheral-props.yaml).
> 2. Add Rb tag.
>
> Changes since v1
> ================
> 1. Continue the rework for entire IIO.
> v1: https://lore.kernel.org/all/20220715095302.214276-1-krzysztof.kozlowski@linaro.org/
>
> Best regards,
> Krzysztof
>
> Krzysztof Kozlowski (10):
> dt-bindings: iio: adc: use spi-peripheral-props.yaml
> dt-bindings: iio: accel: use spi-peripheral-props.yaml
> dt-bindings: iio: amplifiers: adi,ada4250: use
> spi-peripheral-props.yaml
> dt-bindings: iio: dac: use spi-peripheral-props.yaml
> dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml
> dt-bindings: iio: health: ti,afe4403: use spi-peripheral-props.yaml
> dt-bindings: iio: imu: use spi-peripheral-props.yaml
> dt-bindings: iio: potentiometer: use spi-peripheral-props.yaml
> dt-bindings: iio: samsung,sensorhub-rinato: use
> spi-peripheral-props.yaml
> dt-bindings: iio: temperature: use spi-peripheral-props.yaml
For the series,
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
2022-08-18 14:52 ` [PATCH v3 00/10] dt-bindings: iio: " Rob Herring
@ 2022-08-19 18:41 ` Jonathan Cameron
0 siblings, 0 replies; 13+ messages in thread
From: Jonathan Cameron @ 2022-08-19 18:41 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, Lars-Peter Clausen, Michael Hennerich,
Krzysztof Kozlowski, Lucas Stankus, Puranjay Mohan,
Cosmin Tanislav, Alexandru Tachici, Marcelo Schmitt,
Marcus Folkesson, Kent Gustavsson, Tomislav Denis, Oleksij Rempel,
kernel, Antoniu Miclaus, Ricardo Ribalda, Dragos Bogdan,
Jean-Baptiste Maneyrol, Lorenzo Bianconi, Stefan Popa,
Linus Walleij, Stephan Gerhold, Mike Looijmans, Tomas Melin,
Sean Nyekjaer, Patrick Vasseur, Charles-Antoine Couret,
Vladimir Barinov, Miquel Raynal, Philippe Reynes, Jacopo Mondi,
Akinobu Mita, Alexandru Lazar, Oskar Andero, Mårten Lindahl,
Angelo Compagnucci, Matt Ranostay, Andrew Davis, Gregory Clement,
Phil Reid, Michael Welling, Lukas Wunner, Chris Coffey,
Slawomir Stepien, Sankar Velliangiri, linux-iio, devicetree,
linux-kernel, linux-fbdev
On Thu, 18 Aug 2022 08:52:48 -0600
Rob Herring <robh@kernel.org> wrote:
> On Tue, Aug 16, 2022 at 03:43:11PM +0300, Krzysztof Kozlowski wrote:
> > Hi,
> >
> > The patchset is independent of my other recent changes around SPI, so feel free
> > to apply it for next release.
> >
> > Changes since v2
> > ================
> > 1. Keep spi-3wire also in device bindings (not in spi-peripheral-props.yaml).
> > 2. Add Rb tag.
> >
> > Changes since v1
> > ================
> > 1. Continue the rework for entire IIO.
> > v1: https://lore.kernel.org/all/20220715095302.214276-1-krzysztof.kozlowski@linaro.org/
> >
> > Best regards,
> > Krzysztof
> >
> > Krzysztof Kozlowski (10):
> > dt-bindings: iio: adc: use spi-peripheral-props.yaml
> > dt-bindings: iio: accel: use spi-peripheral-props.yaml
> > dt-bindings: iio: amplifiers: adi,ada4250: use
> > spi-peripheral-props.yaml
> > dt-bindings: iio: dac: use spi-peripheral-props.yaml
> > dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml
> > dt-bindings: iio: health: ti,afe4403: use spi-peripheral-props.yaml
> > dt-bindings: iio: imu: use spi-peripheral-props.yaml
> > dt-bindings: iio: potentiometer: use spi-peripheral-props.yaml
> > dt-bindings: iio: samsung,sensorhub-rinato: use
> > spi-peripheral-props.yaml
> > dt-bindings: iio: temperature: use spi-peripheral-props.yaml
>
> For the series,
>
> Reviewed-by: Rob Herring <robh@kernel.org>
Series applied to the togreg branch of iio.git and pushed out as testing
Thanks,
Jonathan
^ permalink raw reply [flat|nested] 13+ messages in thread