From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
Helge Deller <deller@gmx.de>, Tony Lindgren <tony@atomide.com>,
Sebastian Reichel <sre@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org,
linux-omap@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH 01/13] omapfb: connector-hdmi: switch to using gpiod API
Date: Thu, 3 Nov 2022 15:46:37 -0700 [thread overview]
Message-ID: <20221103-omapfb-gpiod-v1-1-c3d53ca7988f@gmail.com> (raw)
In-Reply-To: <20221103-omapfb-gpiod-v1-0-c3d53ca7988f@gmail.com>
Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
.../fbdev/omap2/omapfb/displays/connector-hdmi.c | 49 +++++++---------------
1 file changed, 14 insertions(+), 35 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
index 670b9c6eb5a9..8f9ff9fb4ca4 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
@@ -6,11 +6,12 @@
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*/
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <drm/drm_edid.h>
@@ -41,7 +42,7 @@ struct panel_drv_data {
struct omap_video_timings timings;
- int hpd_gpio;
+ struct gpio_desc *hpd_gpio;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
@@ -155,8 +156,8 @@ static bool hdmic_detect(struct omap_dss_device *dssdev)
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
- if (gpio_is_valid(ddata->hpd_gpio))
- return gpio_get_value_cansleep(ddata->hpd_gpio);
+ if (ddata->hpd_gpio)
+ return gpiod_get_value_cansleep(ddata->hpd_gpio);
else
return in->ops.hdmi->detect(in);
}
@@ -197,31 +198,6 @@ static struct omap_dss_driver hdmic_driver = {
.set_hdmi_infoframe = hdmic_set_infoframe,
};
-static int hdmic_probe_of(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct device_node *node = pdev->dev.of_node;
- struct omap_dss_device *in;
- int gpio;
-
- /* HPD GPIO */
- gpio = of_get_named_gpio(node, "hpd-gpios", 0);
- if (gpio_is_valid(gpio))
- ddata->hpd_gpio = gpio;
- else
- ddata->hpd_gpio = -ENODEV;
-
- in = omapdss_of_find_source_for_first_ep(node);
- if (IS_ERR(in)) {
- dev_err(&pdev->dev, "failed to find video source\n");
- return PTR_ERR(in);
- }
-
- ddata->in = in;
-
- return 0;
-}
-
static int hdmic_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
@@ -238,15 +214,18 @@ static int hdmic_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ddata);
ddata->dev = &pdev->dev;
- r = hdmic_probe_of(pdev);
+ ddata->hpd_gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
+ r = PTR_ERR_OR_ZERO(ddata->hpd_gpio);
if (r)
return r;
- if (gpio_is_valid(ddata->hpd_gpio)) {
- r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
- GPIOF_DIR_IN, "hdmi_hpd");
- if (r)
- goto err_reg;
+ gpiod_set_consumer_name(ddata->hpd_gpio, "hdmi_hpd");
+
+ ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+ r = PTR_ERR_OR_ZERO(ddata->in);
+ if (r) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return r;
}
ddata->timings = hdmic_default_timings;
--
b4 0.11.0-dev-5166b
next prev parent reply other threads:[~2022-11-03 22:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-03 22:46 [PATCH 00/13] Convert omapfb drivers to gpiod API Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 0/7] " Dmitry Torokhov
2022-11-03 22:46 ` Dmitry Torokhov [this message]
2022-11-03 22:46 ` [PATCH 02/13] omapfb: panel-sony-acx565akm: remove support for platform data Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 03/13] omapfb: panel-sony-acx565akm: switch to using gpiod API Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 04/13] omapfb: encoder-tfp410: " Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 05/13] omapfb: panel-dsi-cm: " Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 06/13] omapfb: panel-tpo-td043mtea1: " Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 07/13] omapfb: panel-nec-nl8048hl11: " Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 08/13] omapfb: panel-dpi: remove support for platform data Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 09/13] omapfb: connector-analog-tv: " Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 10/13] omapfb: encoder-opa362: fix included headers Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 11/13] omapfb: panel-lgphilips-lb035q02: remove backlight GPIO handling Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 12/13] omapfb: panel-tpo-td028ttec1: stop including gpio.h Dmitry Torokhov
2022-11-03 22:46 ` [PATCH 13/13] omapfb: panel-sharp-ls037v7dw01: fix included headers Dmitry Torokhov
2022-11-03 22:49 ` [PATCH 00/13] Convert omapfb drivers to gpiod API Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221103-omapfb-gpiod-v1-1-c3d53ca7988f@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=deller@gmx.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=sre@kernel.org \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).