[PATCH 00/13] Convert omapfb drivers to gpiod API

[PATCH 00/13] Convert omapfb drivers to gpiod API

[Dmitry Torokhov]

This series converts various OMAPFB drivers to use the newer gpiod API
that respects line polarity specified in DTS.

Unfortunately existing DTS files specify incorrect (active high) polarity
for reset lines. As discussed in [1] we will not try to correct existing
DTSes, but instead follow the path established by DRM drivers for the same
components, and continue using inverted polarity in the FB drivers.

[1] https://lore.kernel.org/all/20221004213503.848262-1-dmitry.torokhov@gmail.com/

To: Helge Deller <deller@gmx.de>
To: Tony Lindgren <tony@atomide.com>
To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Sebastian Reichel <sre@kernel.org>
Cc: linux-omap@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org

---
Dmitry Torokhov (13):
      omapfb: connector-hdmi: switch to using gpiod API
      omapfb: panel-sony-acx565akm: remove support for platform data
      omapfb: panel-sony-acx565akm: switch to using gpiod API
      omapfb: encoder-tfp410: switch to using gpiod API
      omapfb: panel-dsi-cm: switch to using gpiod API
      omapfb: panel-tpo-td043mtea1: switch to using gpiod API
      omapfb: panel-nec-nl8048hl11: switch to using gpiod API
      omapfb: panel-dpi: remove support for platform data
      omapfb: connector-analog-tv: remove support for platform data
      omapfb: encoder-opa362: fix included headers
      omapfb: panel-lgphilips-lb035q02: remove backlight GPIO handling
      omapfb: panel-tpo-td028ttec1: stop including gpio.h
      omapfb: panel-sharp-ls037v7dw01: fix included headers

 .../omap2/omapfb/displays/connector-analog-tv.c    |  60 ++---------
 .../fbdev/omap2/omapfb/displays/connector-hdmi.c   |  49 +++------
 .../fbdev/omap2/omapfb/displays/encoder-opa362.c   |   4 +-
 .../fbdev/omap2/omapfb/displays/encoder-tfp410.c   |  67 ++++--------
 .../video/fbdev/omap2/omapfb/displays/panel-dpi.c  |  83 ++-------------
 .../fbdev/omap2/omapfb/displays/panel-dsi-cm.c     | 116 ++++++++-------------
 .../omapfb/displays/panel-lgphilips-lb035q02.c     |  21 +---
 .../omap2/omapfb/displays/panel-nec-nl8048hl11.c   |  72 ++++---------
 .../omapfb/displays/panel-sharp-ls037v7dw01.c      |   3 +-
 .../omap2/omapfb/displays/panel-sony-acx565akm.c   | 105 ++++++-------------
 .../omap2/omapfb/displays/panel-tpo-td028ttec1.c   |   1 -
 .../omap2/omapfb/displays/panel-tpo-td043mtea1.c   |  59 +++--------
 include/video/omap-panel-data.h                    |  71 -------------
 13 files changed, 170 insertions(+), 541 deletions(-)
---
base-commit: 61c3426aca2c71052ddcd06c32e29d92304990fd
change-id: 20221103-omapfb-gpiod-87ca2550bd90

-- 
Dmitry

[PATCH 0/7] Convert omapfb drivers to gpiod API

[Dmitry Torokhov]

This series converts various OMAPFB drivers to use the newer gpiod API
that respects line polarity specified in DTS.

Unfortunately existing DTS files specify incorrect (active high) polarity
for reset lines. As discussed in [1] we will not try to correct existing
DTSes, but instead follow the path established by DRM drivers for the same
components, and continue using inverted polarity in the FB drivers.

[1] https://lore.kernel.org/all/20221004213503.848262-1-dmitry.torokhov@gmail.com/

To: Helge Deller <deller@gmx.de>
To: Tony Lindgren <tony@atomide.com>
To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Sebastian Reichel <sre@kernel.org>
Cc: linux-omap@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org

---
Dmitry Torokhov (7):
      omapfb: connector-hdmi: switch to using gpiod API
      omapfb: panel-sony-acx565akm: remove support for platform data
      omapfb: panel-sony-acx565akm: switch to using gpiod API
      omapfb: encoder-tfp410: switch to using gpiod API
      omapfb: panel-dsi-cm: switch to using gpiod API
      omapfb: panel-tpo-td043mtea1: switch to using gpiod API
      omapfb: panel-nec-nl8048hl11: switch to using gpiod API

 .../fbdev/omap2/omapfb/displays/connector-hdmi.c   |  49 +++------
 .../fbdev/omap2/omapfb/displays/encoder-tfp410.c   |  67 ++++--------
 .../fbdev/omap2/omapfb/displays/panel-dsi-cm.c     | 116 ++++++++-------------
 .../omap2/omapfb/displays/panel-nec-nl8048hl11.c   |  72 ++++---------
 .../omap2/omapfb/displays/panel-sony-acx565akm.c   | 105 ++++++-------------
 .../omap2/omapfb/displays/panel-tpo-td043mtea1.c   |  59 +++--------
 include/video/omap-panel-data.h                    |  16 ---
 7 files changed, 151 insertions(+), 333 deletions(-)
---
base-commit: 61c3426aca2c71052ddcd06c32e29d92304990fd
change-id: 20221103-omapfb-gpiod-87ca2550bd90

-- 
Dmitry

[PATCH 01/13] omapfb: connector-hdmi: switch to using gpiod API

[Dmitry Torokhov]

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../fbdev/omap2/omapfb/displays/connector-hdmi.c   | 49 +++++++---------------
 1 file changed, 14 insertions(+), 35 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
index 670b9c6eb5a9..8f9ff9fb4ca4 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
@@ -6,11 +6,12 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <drm/drm_edid.h>
 
@@ -41,7 +42,7 @@ struct panel_drv_data {
 
 	struct omap_video_timings timings;
 
-	int hpd_gpio;
+	struct gpio_desc *hpd_gpio;
 };
 
 #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
@@ -155,8 +156,8 @@ static bool hdmic_detect(struct omap_dss_device *dssdev)
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
 	struct omap_dss_device *in = ddata->in;
 
-	if (gpio_is_valid(ddata->hpd_gpio))
-		return gpio_get_value_cansleep(ddata->hpd_gpio);
+	if (ddata->hpd_gpio)
+		return gpiod_get_value_cansleep(ddata->hpd_gpio);
 	else
 		return in->ops.hdmi->detect(in);
 }
@@ -197,31 +198,6 @@ static struct omap_dss_driver hdmic_driver = {
 	.set_hdmi_infoframe	= hdmic_set_infoframe,
 };
 
-static int hdmic_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-	int gpio;
-
-	/* HPD GPIO */
-	gpio = of_get_named_gpio(node, "hpd-gpios", 0);
-	if (gpio_is_valid(gpio))
-		ddata->hpd_gpio = gpio;
-	else
-		ddata->hpd_gpio = -ENODEV;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int hdmic_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -238,15 +214,18 @@ static int hdmic_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ddata);
 	ddata->dev = &pdev->dev;
 
-	r = hdmic_probe_of(pdev);
+	ddata->hpd_gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
+	r = PTR_ERR_OR_ZERO(ddata->hpd_gpio);
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->hpd_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
-				GPIOF_DIR_IN, "hdmi_hpd");
-		if (r)
-			goto err_reg;
+	gpiod_set_consumer_name(ddata->hpd_gpio, "hdmi_hpd");
+
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return r;
 	}
 
 	ddata->timings = hdmic_default_timings;

-- 
b4 0.11.0-dev-5166b

[PATCH 02/13] omapfb: panel-sony-acx565akm: remove support for platform data

[Dmitry Torokhov]

There are no users of panel_acx565akm_platform_data in the mainline
kernel so support for it can be removed from the panel driver.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../omap2/omapfb/displays/panel-sony-acx565akm.c   | 45 +++-------------------
 include/video/omap-panel-data.h                    | 16 --------
 2 files changed, 6 insertions(+), 55 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
index c0965bee12c5..0c81d3ff4197 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
@@ -23,7 +23,6 @@
 #include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
-#include <video/omap-panel-data.h>
 
 #define MIPID_CMD_READ_DISP_ID		0x04
 #define MIPID_CMD_READ_RED		0x06
@@ -688,32 +687,6 @@ static struct omap_dss_driver acx565akm_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-static int acx565akm_probe_pdata(struct spi_device *spi)
-{
-	const struct panel_acx565akm_platform_data *pdata;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&spi->dev);
-
-	ddata->reset_gpio = pdata->reset_gpio;
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&spi->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-	ddata->in = in;
-
-	ddata->datapairs = pdata->datapairs;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
 static int acx565akm_probe_of(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
@@ -741,6 +714,9 @@ static int acx565akm_probe(struct spi_device *spi)
 
 	dev_dbg(&spi->dev, "%s\n", __func__);
 
+	if (!spi->dev.of_node)
+		return -ENODEV;
+
 	spi->mode = SPI_MODE_3;
 
 	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
@@ -753,18 +729,9 @@ static int acx565akm_probe(struct spi_device *spi)
 
 	mutex_init(&ddata->mutex);
 
-	if (dev_get_platdata(&spi->dev)) {
-		r = acx565akm_probe_pdata(spi);
-		if (r)
-			return r;
-	} else if (spi->dev.of_node) {
-		r = acx565akm_probe_of(spi);
-		if (r)
-			return r;
-	} else {
-		dev_err(&spi->dev, "platform data missing!\n");
-		return -ENODEV;
-	}
+	r = acx565akm_probe_of(spi);
+	if (r)
+		return r;
 
 	if (gpio_is_valid(ddata->reset_gpio)) {
 		r = devm_gpio_request_one(&spi->dev, ddata->reset_gpio,
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
index 42b77249ee14..b7733150b55c 100644
--- a/include/video/omap-panel-data.h
+++ b/include/video/omap-panel-data.h
@@ -52,20 +52,4 @@ struct panel_dpi_platform_data {
 	int enable_gpio;
 };
 
-/**
- * panel_acx565akm platform data
- * @name: name for this display entity
- * @source: name of the display entity used as a video source
- * @reset_gpio: gpio to reset the panel (or -1)
- * @datapairs: number of SDI datapairs
- */
-struct panel_acx565akm_platform_data {
-	const char *name;
-	const char *source;
-
-	int reset_gpio;
-
-	int datapairs;
-};
-
 #endif /* __OMAP_PANEL_DATA_H */

-- 
b4 0.11.0-dev-5166b

[PATCH 03/13] omapfb: panel-sony-acx565akm: switch to using gpiod API

[Dmitry Torokhov]

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

Note that because existing DTSes specify incorrect polarity of reset
lines (active high) and GPU drivers have adopted to this, we follow
the suit and use inverted values when controlling reset lines.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../omap2/omapfb/displays/panel-sony-acx565akm.c   | 66 ++++++++++------------
 1 file changed, 31 insertions(+), 35 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
index 0c81d3ff4197..685c63aa4e03 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
@@ -18,9 +18,8 @@
 #include <linux/sched.h>
 #include <linux/backlight.h>
 #include <linux/fb.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 
@@ -56,7 +55,8 @@ struct panel_drv_data {
 	struct omap_dss_device	dssdev;
 	struct omap_dss_device *in;
 
-	int reset_gpio;
+	struct gpio_desc *reset_gpio;
+
 	int datapairs;
 
 	struct omap_video_timings videomode;
@@ -545,8 +545,13 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
 	/*FIXME tweak me */
 	msleep(50);
 
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 1);
+	/*
+	 * Note that we appear to activate the reset line here. However
+	 * existing DTSes specified incorrect polarity for it (active high),
+	 * so in fact this deasserts the reset line.
+	 */
+	if (ddata->reset_gpio)
+		gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 
 	if (ddata->enabled) {
 		dev_dbg(&ddata->spi->dev, "panel already enabled\n");
@@ -595,8 +600,9 @@ static void acx565akm_panel_power_off(struct omap_dss_device *dssdev)
 	 */
 	msleep(50);
 
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 0);
+	/* see comment in acx565akm_panel_power_on() */
+	if (ddata->reset_gpio)
+		gpiod_set_value_cansleep(ddata->reset_gpio, 0);
 
 	/* FIXME need to tweak this delay */
 	msleep(100);
@@ -687,22 +693,6 @@ static struct omap_dss_driver acx565akm_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-static int acx565akm_probe_of(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct device_node *np = spi->dev.of_node;
-
-	ddata->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
-
-	ddata->in = omapdss_of_find_source_for_first_ep(np);
-	if (IS_ERR(ddata->in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(ddata->in);
-	}
-
-	return 0;
-}
-
 static int acx565akm_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -729,19 +719,25 @@ static int acx565akm_probe(struct spi_device *spi)
 
 	mutex_init(&ddata->mutex);
 
-	r = acx565akm_probe_of(spi);
-	if (r)
+	ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&spi->dev, "failed to find video source\n");
 		return r;
-
-	if (gpio_is_valid(ddata->reset_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd reset");
-		if (r)
-			goto err_gpio;
 	}
 
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 1);
+	ddata->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+						    GPIOD_OUT_LOW);
+	r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+	if (r)
+		goto err_gpio;
+
+	if (ddata->reset_gpio) {
+		gpiod_set_consumer_name(ddata->reset_gpio, "lcd reset");
+
+		/* release the reset line */
+		gpiod_set_value_cansleep(ddata->reset_gpio, 1);
+	}
 
 	/*
 	 * After reset we have to wait 5 msec before the first
@@ -753,8 +749,8 @@ static int acx565akm_probe(struct spi_device *spi)
 
 	r = panel_detect(ddata);
 
-	if (!ddata->enabled && gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 0);
+	if (!ddata->enabled && ddata->reset_gpio)
+		gpiod_set_value_cansleep(ddata->reset_gpio, 0);
 
 	if (r) {
 		dev_err(&spi->dev, "%s panel detect error\n", __func__);

-- 
b4 0.11.0-dev-5166b

[PATCH 04/13] omapfb: encoder-tfp410: switch to using gpiod API

[Dmitry Torokhov]

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../fbdev/omap2/omapfb/displays/encoder-tfp410.c   | 67 +++++++---------------
 1 file changed, 22 insertions(+), 45 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
index 09a59bd93d61..7bac420169a6 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
@@ -6,11 +6,12 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 
@@ -18,7 +19,8 @@ struct panel_drv_data {
 	struct omap_dss_device dssdev;
 	struct omap_dss_device *in;
 
-	int pd_gpio;
+	struct gpio_desc *pd_gpio;
+
 	int data_lines;
 
 	struct omap_video_timings timings;
@@ -86,8 +88,8 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value_cansleep(ddata->pd_gpio, 1);
+	if (ddata->pd_gpio)
+		gpiod_set_value_cansleep(ddata->pd_gpio, 0);
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -102,8 +104,8 @@ static void tfp410_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value_cansleep(ddata->pd_gpio, 0);
+	if (ddata->pd_gpio)
+		gpiod_set_value_cansleep(ddata->pd_gpio, 1);
 
 	in->ops.dpi->disable(in);
 
@@ -162,33 +164,6 @@ static const struct omapdss_dvi_ops tfp410_dvi_ops = {
 	.get_timings	= tfp410_get_timings,
 };
 
-static int tfp410_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
-
-	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
-		ddata->pd_gpio = gpio;
-	} else {
-		dev_err(&pdev->dev, "failed to parse PD gpio\n");
-		return gpio;
-	}
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int tfp410_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
@@ -204,18 +179,21 @@ static int tfp410_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ddata);
 
-	r = tfp410_probe_of(pdev);
-	if (r)
+	ddata->pd_gpio = devm_gpiod_get_optional(&pdev->dev, "powerdown",
+						 GPIOD_OUT_HIGH);
+	r = PTR_ERR_OR_ZERO(ddata->pd_gpio);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to request PD GPIO: %d\n", r);
 		return r;
+	}
+
+	gpiod_set_consumer_name(ddata->pd_gpio, "tfp410 PD");
 
-	if (gpio_is_valid(ddata->pd_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->pd_gpio,
-				GPIOF_OUT_INIT_LOW, "tfp410 PD");
-		if (r) {
-			dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
-					ddata->pd_gpio);
-			goto err_gpio;
-		}
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source: %d\n", r);
+		return r;
 	}
 
 	dssdev = &ddata->dssdev;
@@ -235,7 +213,6 @@ static int tfp410_probe(struct platform_device *pdev)
 
 	return 0;
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }

-- 
b4 0.11.0-dev-5166b

[PATCH 05/13] omapfb: panel-dsi-cm: switch to using gpiod API

[Dmitry Torokhov]

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

Note that because existing DTSes specify incorrect polarity of reset
lines (active high) and GPU drivers have adopted to this, we follow
the suit and use inverted values when controlling reset lines.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../fbdev/omap2/omapfb/displays/panel-dsi-cm.c     | 116 ++++++++-------------
 1 file changed, 45 insertions(+), 71 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
index a2c7c5cb1523..4fc4b26a8d30 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
@@ -10,8 +10,9 @@
 
 #include <linux/backlight.h>
 #include <linux/delay.h>
+#include <linux/err.h>
 #include <linux/fb.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
@@ -20,7 +21,6 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 #include <video/mipi_display.h>
@@ -53,8 +53,8 @@ struct panel_drv_data {
 	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
 
 	/* panel HW configuration from DT or platform data */
-	int reset_gpio;
-	int ext_te_gpio;
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *ext_te_gpio;
 
 	bool use_dsi_backlight;
 
@@ -250,8 +250,8 @@ static int dsicm_enter_ulps(struct panel_drv_data *ddata)
 	if (r)
 		goto err;
 
-	if (gpio_is_valid(ddata->ext_te_gpio))
-		disable_irq(gpio_to_irq(ddata->ext_te_gpio));
+	if (ddata->ext_te_gpio)
+		disable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 
 	in->ops.dsi->disable(in, false, true);
 
@@ -292,8 +292,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 		goto err2;
 	}
 
-	if (gpio_is_valid(ddata->ext_te_gpio))
-		enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+	if (ddata->ext_te_gpio)
+		enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 
 	dsicm_queue_ulps_work(ddata);
 
@@ -306,8 +306,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 
 	r = dsicm_panel_reset(ddata);
 	if (!r) {
-		if (gpio_is_valid(ddata->ext_te_gpio))
-			enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+		if (ddata->ext_te_gpio)
+			enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
 		ddata->ulps_enabled = false;
 	}
 err1:
@@ -556,16 +556,19 @@ static const struct attribute_group dsicm_attr_group = {
 
 static void dsicm_hw_reset(struct panel_drv_data *ddata)
 {
-	if (!gpio_is_valid(ddata->reset_gpio))
-		return;
-
-	gpio_set_value(ddata->reset_gpio, 1);
+	/*
+	 * Note that we appear to activate the reset line here. However
+	 * existing DTSes specified incorrect polarity for it (active high),
+	 * so in fact this deasserts the reset line.
+	 */
+	gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 	udelay(10);
 	/* reset the panel */
-	gpio_set_value(ddata->reset_gpio, 0);
-	/* assert reset */
+	gpiod_set_value_cansleep(ddata->reset_gpio, 0);
+	/* keep reset asserted */
 	udelay(10);
-	gpio_set_value(ddata->reset_gpio, 1);
+	/* release reset line */
+	gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 	/* wait after releasing reset */
 	usleep_range(5000, 10000);
 }
@@ -886,7 +889,7 @@ static int dsicm_update(struct omap_dss_device *dssdev,
 	if (r)
 		goto err;
 
-	if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) {
+	if (ddata->te_enabled && ddata->ext_te_gpio) {
 		schedule_delayed_work(&ddata->te_timeout_work,
 				msecs_to_jiffies(250));
 		atomic_set(&ddata->do_update, 1);
@@ -933,7 +936,7 @@ static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
 	else
 		r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF);
 
-	if (!gpio_is_valid(ddata->ext_te_gpio))
+	if (!ddata->ext_te_gpio)
 		in->ops.dsi->enable_te(in, enable);
 
 	/* possible panel bug */
@@ -1115,41 +1118,6 @@ static struct omap_dss_driver dsicm_ops = {
 	.memory_read	= dsicm_memory_read,
 };
 
-static int dsicm_probe_of(struct platform_device *pdev)
-{
-	struct device_node *node = pdev->dev.of_node;
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&pdev->dev, "failed to parse reset gpio\n");
-		return gpio;
-	}
-	ddata->reset_gpio = gpio;
-
-	gpio = of_get_named_gpio(node, "te-gpios", 0);
-	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
-		ddata->ext_te_gpio = gpio;
-	} else {
-		dev_err(&pdev->dev, "failed to parse TE gpio\n");
-		return gpio;
-	}
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	/* TODO: ulps, backlight */
-
-	return 0;
-}
-
 static int dsicm_probe(struct platform_device *pdev)
 {
 	struct backlight_properties props;
@@ -1171,9 +1139,12 @@ static int dsicm_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ddata);
 	ddata->pdev = pdev;
 
-	r = dsicm_probe_of(pdev);
-	if (r)
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source: %d\n", r);
 		return r;
+	}
 
 	ddata->timings.x_res = 864;
 	ddata->timings.y_res = 480;
@@ -1200,24 +1171,27 @@ static int dsicm_probe(struct platform_device *pdev)
 
 	atomic_set(&ddata->do_update, 0);
 
-	if (gpio_is_valid(ddata->reset_gpio)) {
-		r = devm_gpio_request_one(dev, ddata->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "taal rst");
-		if (r) {
-			dev_err(dev, "failed to request reset gpio\n");
-			return r;
-		}
+	ddata->reset_gpio = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
+	r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to request reset gpio: %d\n", r);
+		return r;
 	}
 
-	if (gpio_is_valid(ddata->ext_te_gpio)) {
-		r = devm_gpio_request_one(dev, ddata->ext_te_gpio,
-				GPIOF_IN, "taal irq");
-		if (r) {
-			dev_err(dev, "GPIO request failed\n");
-			return r;
-		}
+	gpiod_set_consumer_name(ddata->reset_gpio, "taal rst");
+
+	ddata->ext_te_gpio = devm_gpiod_get_optional(&pdev->dev, "te",
+						     GPIOD_IN);
+	r = PTR_ERR_OR_ZERO(ddata->ext_te_gpio);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to request TE gpio: %d\n", r);
+		return r;
+	}
+
+	if (ddata->ext_te_gpio) {
+		gpiod_set_consumer_name(ddata->ext_te_gpio, "taal irq");
 
-		r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio),
+		r = devm_request_irq(dev, gpiod_to_irq(ddata->ext_te_gpio),
 				dsicm_te_isr,
 				IRQF_TRIGGER_RISING,
 				"taal vsync", ddata);

-- 
b4 0.11.0-dev-5166b

[PATCH 06/13] omapfb: panel-tpo-td043mtea1: switch to using gpiod API

[Dmitry Torokhov]

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../omap2/omapfb/displays/panel-tpo-td043mtea1.c   | 59 ++++++----------------
 1 file changed, 16 insertions(+), 43 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
index c0e4e0315b6b..1eaa35c27835 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
@@ -10,10 +10,9 @@
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/regulator/consumer.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/err.h>
 #include <linux/slab.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 
@@ -58,7 +57,7 @@ struct panel_drv_data {
 
 	struct spi_device *spi;
 	struct regulator *vcc_reg;
-	int nreset_gpio;
+	struct gpio_desc *reset_gpio;
 	u16 gamma[12];
 	u32 mode;
 	u32 hmirror:1;
@@ -296,8 +295,7 @@ static int tpo_td043_power_on(struct panel_drv_data *ddata)
 	/* wait for panel to stabilize */
 	msleep(160);
 
-	if (gpio_is_valid(ddata->nreset_gpio))
-		gpio_set_value(ddata->nreset_gpio, 1);
+	gpiod_set_value_cansleep(ddata->reset_gpio, 0);
 
 	tpo_td043_write(ddata->spi, 2,
 			TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
@@ -320,8 +318,7 @@ static void tpo_td043_power_off(struct panel_drv_data *ddata)
 	tpo_td043_write(ddata->spi, 3,
 			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
 
-	if (gpio_is_valid(ddata->nreset_gpio))
-		gpio_set_value(ddata->nreset_gpio, 0);
+	gpiod_set_value_cansleep(ddata->reset_gpio, 1);
 
 	/* wait for at least 2 vsyncs before cutting off power */
 	msleep(50);
@@ -454,32 +451,6 @@ static struct omap_dss_driver tpo_td043_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-
-static int tpo_td043_probe_of(struct spi_device *spi)
-{
-	struct device_node *node = spi->dev.of_node;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&spi->dev, "failed to parse enable gpio\n");
-		return gpio;
-	}
-	ddata->nreset_gpio = gpio;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int tpo_td043_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -508,9 +479,12 @@ static int tpo_td043_probe(struct spi_device *spi)
 
 	ddata->spi = spi;
 
-	r = tpo_td043_probe_of(spi);
-	if (r)
+	ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&spi->dev, "failed to find video source: %d\n", r);
 		return r;
+	}
 
 	ddata->mode = TPO_R02_MODE_800x480;
 	memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
@@ -521,16 +495,15 @@ static int tpo_td043_probe(struct spi_device *spi)
 		goto err_regulator;
 	}
 
-	if (gpio_is_valid(ddata->nreset_gpio)) {
-		r = devm_gpio_request_one(&spi->dev,
-				ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
-				"lcd reset");
-		if (r < 0) {
-			dev_err(&spi->dev, "couldn't request reset GPIO\n");
-			goto err_gpio_req;
-		}
+	ddata->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
+	r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+	if (r) {
+		dev_err(&spi->dev, "couldn't request reset GPIO\n");
+		goto err_gpio_req;
 	}
 
+	gpiod_set_consumer_name(ddata->reset_gpio, "lcd reset");
+
 	r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
 	if (r) {
 		dev_err(&spi->dev, "failed to create sysfs files\n");

-- 
b4 0.11.0-dev-5166b

[PATCH 07/13] omapfb: panel-nec-nl8048hl11: switch to using gpiod API

[Dmitry Torokhov]

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

Note that because existing DTSes specify incorrect polarity of reset
lines (active high) and GPU drivers have adopted to this, we follow
the suit and use inverted values when controlling reset lines.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../omap2/omapfb/displays/panel-nec-nl8048hl11.c   | 72 ++++++----------------
 1 file changed, 20 insertions(+), 52 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
index b407173e27b1..33563953b2ff 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
@@ -7,12 +7,12 @@
  * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/spi/spi.h>
+#include <linux/err.h>
 #include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
 
 #include <video/omapfb_dss.h>
 
@@ -24,8 +24,7 @@ struct panel_drv_data {
 
 	int data_lines;
 
-	int res_gpio;
-	int qvga_gpio;
+	struct gpio_desc *res_gpio;
 
 	struct spi_device *spi;
 };
@@ -155,8 +154,8 @@ static int nec_8048_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->res_gpio))
-		gpio_set_value_cansleep(ddata->res_gpio, 1);
+	/* Apparently existing DTSes use incorrect polarity (active high) */
+	gpiod_set_value_cansleep(ddata->res_gpio, 1);
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -171,8 +170,8 @@ static void nec_8048_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->res_gpio))
-		gpio_set_value_cansleep(ddata->res_gpio, 0);
+	/* Apparently existing DTSes use incorrect polarity (active high) */
+	gpiod_set_value_cansleep(ddata->res_gpio, 0);
 
 	in->ops.dpi->disable(in);
 
@@ -222,35 +221,6 @@ static struct omap_dss_driver nec_8048_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-
-static int nec_8048_probe_of(struct spi_device *spi)
-{
-	struct device_node *node = spi->dev.of_node;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&spi->dev, "failed to parse enable gpio\n");
-		return gpio;
-	}
-	ddata->res_gpio = gpio;
-
-	/* XXX the panel spec doesn't mention any QVGA pin?? */
-	ddata->qvga_gpio = -ENOENT;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int nec_8048_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -281,24 +251,22 @@ static int nec_8048_probe(struct spi_device *spi)
 
 	ddata->spi = spi;
 
-	r = nec_8048_probe_of(spi);
-	if (r)
+	ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&spi->dev, "failed to find video source: %d\n", r);
 		return r;
-
-	if (gpio_is_valid(ddata->qvga_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->qvga_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd QVGA");
-		if (r)
-			goto err_gpio;
 	}
 
-	if (gpio_is_valid(ddata->res_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->res_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd RES");
-		if (r)
-			goto err_gpio;
+	ddata->res_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
+	r = PTR_ERR_OR_ZERO(ddata->res_gpio);
+	if (r) {
+		dev_err(&spi->dev, "failed to request reset gpio: %d\n", r);
+		goto err_gpio;
 	}
 
+	gpiod_set_consumer_name(ddata->res_gpio, "lcd RES");
+
 	ddata->videomode = nec_8048_panel_timings;
 
 	dssdev = &ddata->dssdev;

-- 
b4 0.11.0-dev-5166b

[PATCH 08/13] omapfb: panel-dpi: remove support for platform data

[Dmitry Torokhov]

There are no users of panel_dpi_platform_data in the mainline
kernel so support for it can be removed from the panel driver.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../video/fbdev/omap2/omapfb/displays/panel-dpi.c  | 83 ++--------------------
 include/video/omap-panel-data.h                    | 21 ------
 2 files changed, 7 insertions(+), 97 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
index ff3d1e8e1e7b..9790053c5877 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
@@ -6,15 +6,13 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
-#include <video/omap-panel-data.h>
 #include <video/of_display_timing.h>
 
 struct panel_drv_data {
@@ -25,9 +23,6 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
-	/* used for non-DT boot, to be removed */
-	int backlight_gpio;
-
 	struct gpio_desc *enable_gpio;
 };
 
@@ -77,9 +72,6 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
 
 	gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 	return 0;
@@ -93,9 +85,6 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
 	gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
 	in->ops.dpi->disable(in);
@@ -146,49 +135,6 @@ static struct omap_dss_driver panel_dpi_ops = {
 	.get_resolution	= omapdss_default_get_resolution,
 };
 
-static int panel_dpi_probe_pdata(struct platform_device *pdev)
-{
-	const struct panel_dpi_platform_data *pdata;
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev, *in;
-	struct videomode vm;
-	int r;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	videomode_from_timing(pdata->display_timing, &vm);
-	videomode_to_omap_video_timings(&vm, &ddata->videomode);
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	r = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
-					GPIOF_OUT_INIT_LOW, "panel enable");
-	if (r)
-		goto err_gpio;
-
-	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
-
-	ddata->backlight_gpio = pdata->backlight_gpio;
-
-	return 0;
-
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
 static int panel_dpi_probe_of(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
@@ -205,8 +151,6 @@ static int panel_dpi_probe_of(struct platform_device *pdev)
 
 	ddata->enable_gpio = gpio;
 
-	ddata->backlight_gpio = -ENOENT;
-
 	r = of_get_display_timing(node, "panel-timing", &timing);
 	if (r) {
 		dev_err(&pdev->dev, "failed to get video timing\n");
@@ -233,30 +177,18 @@ static int panel_dpi_probe(struct platform_device *pdev)
 	struct omap_dss_device *dssdev;
 	int r;
 
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
 	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
 	if (ddata == NULL)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, ddata);
 
-	if (dev_get_platdata(&pdev->dev)) {
-		r = panel_dpi_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = panel_dpi_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	if (gpio_is_valid(ddata->backlight_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
-				GPIOF_OUT_INIT_LOW, "panel backlight");
-		if (r)
-			goto err_gpio;
-	}
+	r = panel_dpi_probe_of(pdev);
+	if (r)
+		return r;
 
 	dssdev = &ddata->dssdev;
 	dssdev->dev = &pdev->dev;
@@ -275,7 +207,6 @@ static int panel_dpi_probe(struct platform_device *pdev)
 	return 0;
 
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
index b7733150b55c..18172d7b97d0 100644
--- a/include/video/omap-panel-data.h
+++ b/include/video/omap-panel-data.h
@@ -31,25 +31,4 @@ struct connector_atv_platform_data {
 	bool invert_polarity;
 };
 
-/**
- * panel_dpi platform data
- * @name: name for this display entity
- * @source: name of the display entity used as a video source
- * @data_lines: number of DPI datalines
- * @display_timing: timings for this panel
- * @backlight_gpio: gpio to enable/disable the backlight (or -1)
- * @enable_gpio: gpio to enable/disable the panel (or -1)
- */
-struct panel_dpi_platform_data {
-	const char *name;
-	const char *source;
-
-	int data_lines;
-
-	const struct display_timing *display_timing;
-
-	int backlight_gpio;
-	int enable_gpio;
-};
-
 #endif /* __OMAP_PANEL_DATA_H */

-- 
b4 0.11.0-dev-5166b

[PATCH 09/13] omapfb: connector-analog-tv: remove support for platform data

[Dmitry Torokhov]

There are no users of connector_atv_platform_data in the mainline
kernel so support for it can be removed from the panel driver.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../omap2/omapfb/displays/connector-analog-tv.c    | 60 +++-------------------
 include/video/omap-panel-data.h                    | 34 ------------
 2 files changed, 8 insertions(+), 86 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
index a9fd732f8103..0daaf9f89bab 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
@@ -12,7 +12,6 @@
 #include <linux/of.h>
 
 #include <video/omapfb_dss.h>
-#include <video/omap-panel-data.h>
 
 struct panel_drv_data {
 	struct omap_dss_device dssdev;
@@ -178,53 +177,15 @@ static struct omap_dss_driver tvc_driver = {
 	.set_wss		= tvc_set_wss,
 };
 
-static int tvc_probe_pdata(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct connector_atv_platform_data *pdata;
-	struct omap_dss_device *in, *dssdev;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "Failed to find video source\n");
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->invert_polarity = pdata->invert_polarity;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int tvc_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
 static int tvc_probe(struct platform_device *pdev)
 {
 	struct panel_drv_data *ddata;
 	struct omap_dss_device *dssdev;
 	int r;
 
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
 	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
@@ -232,16 +193,11 @@ static int tvc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ddata);
 	ddata->dev = &pdev->dev;
 
-	if (dev_get_platdata(&pdev->dev)) {
-		r = tvc_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = tvc_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
+	ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+	r = PTR_ERR_OR_ZERO(ddata->in);
+	if (r) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return r;
 	}
 
 	ddata->timings = tvc_pal_timings;
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
deleted file mode 100644
index 18172d7b97d0..000000000000
--- a/include/video/omap-panel-data.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Header containing platform_data structs for omap panels
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *	   Archit Taneja <archit@ti.com>
- *
- * Copyright (C) 2011 Texas Instruments
- * Author: Mayuresh Janorkar <mayur@ti.com>
- *
- * Copyright (C) 2010 Canonical Ltd.
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-
-#ifndef __OMAP_PANEL_DATA_H
-#define __OMAP_PANEL_DATA_H
-
-#include <video/display_timing.h>
-
-/**
- * connector_atv platform data
- * @name: name for this display entity
- * @source: name of the display entity used as a video source
- * @invert_polarity: invert signal polarity
- */
-struct connector_atv_platform_data {
-	const char *name;
-	const char *source;
-
-	bool invert_polarity;
-};
-
-#endif /* __OMAP_PANEL_DATA_H */

-- 
b4 0.11.0-dev-5166b

[PATCH 10/13] omapfb: encoder-opa362: fix included headers

[Dmitry Torokhov]

The driver has been switched to gpiod API, so it should include
gpio/consumer.h instead of gpio.h and of_gpio.h.

With of_gpio.h no longer included we need mod_devicetable.h for
of_device_id definition.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c b/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
index ba7ed4039f8a..dd29dc5c77ec 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
@@ -11,11 +11,11 @@
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/of_gpio.h>
 
 #include <video/omapfb_dss.h>
 

-- 
b4 0.11.0-dev-5166b

[PATCH 11/13] omapfb: panel-lgphilips-lb035q02: remove backlight GPIO handling

[Dmitry Torokhov]

With f048e8c1d169 ("omapfb: panel-lgphilips-lb035q02: Remove legacy boot
support") it is no longer possible to specify GPIO to control the
backlight. Remove code trying to request and toggle it.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../omapfb/displays/panel-lgphilips-lb035q02.c      | 21 +--------------------
 1 file changed, 1 insertion(+), 20 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
index 3ce1f9d2e7c4..e69856cb62d5 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
@@ -11,7 +11,7 @@
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/mutex.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <video/omapfb_dss.h>
 
@@ -46,9 +46,6 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
-	/* used for non-DT boot, to be removed */
-	int backlight_gpio;
-
 	struct gpio_desc *enable_gpio;
 };
 
@@ -166,9 +163,6 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 	if (ddata->enable_gpio)
 		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 	return 0;
@@ -185,9 +179,6 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
 	if (ddata->enable_gpio)
 		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
 	in->ops.dpi->disable(in);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
@@ -250,8 +241,6 @@ static int lb035q02_probe_of(struct spi_device *spi)
 
 	ddata->enable_gpio = gpio;
 
-	ddata->backlight_gpio = -ENOENT;
-
 	in = omapdss_of_find_source_for_first_ep(node);
 	if (IS_ERR(in)) {
 		dev_err(&spi->dev, "failed to find video source\n");
@@ -284,13 +273,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->backlight_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
-				GPIOF_OUT_INIT_LOW, "panel backlight");
-		if (r)
-			goto err_gpio;
-	}
-
 	ddata->videomode = lb035q02_timings;
 
 	dssdev = &ddata->dssdev;
@@ -310,7 +292,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 	return 0;
 
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }

-- 
b4 0.11.0-dev-5166b

[PATCH 12/13] omapfb: panel-tpo-td028ttec1: stop including gpio.h

[Dmitry Torokhov]

The driver does not use gpios, so there is no need to include gpio.h.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
index 3c0f887d3092..c18d290693c1 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <video/omapfb_dss.h>
 
 struct panel_drv_data {

-- 
b4 0.11.0-dev-5166b

[PATCH 13/13] omapfb: panel-sharp-ls037v7dw01: fix included headers

[Dmitry Torokhov]

The driver is using gpiod API so it should include gpio/consumer.h and
not gpio.gh or of_gpio.h.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
index f1072c319de8..cc30758300e2 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
@@ -7,10 +7,9 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/regulator/consumer.h>

-- 
b4 0.11.0-dev-5166b

Re: [PATCH 00/13] Convert omapfb drivers to gpiod API

[Dmitry Torokhov]

On Thu, Nov 03, 2022 at 03:46:35PM -0700, Dmitry Torokhov wrote:
> This series converts various OMAPFB drivers to use the newer gpiod API
> that respects line polarity specified in DTS.
> 
> Unfortunately existing DTS files specify incorrect (active high) polarity
> for reset lines. As discussed in [1] we will not try to correct existing
> DTSes, but instead follow the path established by DRM drivers for the same
> components, and continue using inverted polarity in the FB drivers.
> 
> [1] https://lore.kernel.org/all/20221004213503.848262-1-dmitry.torokhov@gmail.com/

Sorry, it looks like I did not clear temporary directory, so there is a
bit of mess in the patches. I'll resend properly in a second.

> 
> To: Helge Deller <deller@gmx.de>
> To: Tony Lindgren <tony@atomide.com>
> To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> To: Sebastian Reichel <sre@kernel.org>
> Cc: linux-omap@vger.kernel.org
> Cc: linux-fbdev@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-kernel@vger.kernel.org
> 
> ---
> Dmitry Torokhov (13):
>       omapfb: connector-hdmi: switch to using gpiod API
>       omapfb: panel-sony-acx565akm: remove support for platform data
>       omapfb: panel-sony-acx565akm: switch to using gpiod API
>       omapfb: encoder-tfp410: switch to using gpiod API
>       omapfb: panel-dsi-cm: switch to using gpiod API
>       omapfb: panel-tpo-td043mtea1: switch to using gpiod API
>       omapfb: panel-nec-nl8048hl11: switch to using gpiod API
>       omapfb: panel-dpi: remove support for platform data
>       omapfb: connector-analog-tv: remove support for platform data
>       omapfb: encoder-opa362: fix included headers
>       omapfb: panel-lgphilips-lb035q02: remove backlight GPIO handling
>       omapfb: panel-tpo-td028ttec1: stop including gpio.h
>       omapfb: panel-sharp-ls037v7dw01: fix included headers
> 
>  .../omap2/omapfb/displays/connector-analog-tv.c    |  60 ++---------
>  .../fbdev/omap2/omapfb/displays/connector-hdmi.c   |  49 +++------
>  .../fbdev/omap2/omapfb/displays/encoder-opa362.c   |   4 +-
>  .../fbdev/omap2/omapfb/displays/encoder-tfp410.c   |  67 ++++--------
>  .../video/fbdev/omap2/omapfb/displays/panel-dpi.c  |  83 ++-------------
>  .../fbdev/omap2/omapfb/displays/panel-dsi-cm.c     | 116 ++++++++-------------
>  .../omapfb/displays/panel-lgphilips-lb035q02.c     |  21 +---
>  .../omap2/omapfb/displays/panel-nec-nl8048hl11.c   |  72 ++++---------
>  .../omapfb/displays/panel-sharp-ls037v7dw01.c      |   3 +-
>  .../omap2/omapfb/displays/panel-sony-acx565akm.c   | 105 ++++++-------------
>  .../omap2/omapfb/displays/panel-tpo-td028ttec1.c   |   1 -
>  .../omap2/omapfb/displays/panel-tpo-td043mtea1.c   |  59 +++--------
>  include/video/omap-panel-data.h                    |  71 -------------
>  13 files changed, 170 insertions(+), 541 deletions(-)
> ---
> base-commit: 61c3426aca2c71052ddcd06c32e29d92304990fd
> change-id: 20221103-omapfb-gpiod-87ca2550bd90
> 
> -- 
> Dmitry
> 

-- 
Dmitry