From: Dorcas AnonoLitunya <anonolitunya@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: anonolitunya@gmail.com, outreachy@lists.linux.dev,
julia.lawall@inria.fr, dan.carpenter@linaro.org,
Sudip Mukherjee <sudipm.mukherjee@gmail.com>,
Teddy Wang <teddy.wang@siliconmotion.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-fbdev@vger.kernel.org, linux-staging@lists.linux.dev,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/5] Staging: sm750fb: Rename pModeParam
Date: Mon, 16 Oct 2023 23:14:09 +0300 [thread overview]
Message-ID: <20231016201434.7880-3-anonolitunya@gmail.com> (raw)
In-Reply-To: <20231016201434.7880-1-anonolitunya@gmail.com>
Rename variable pModeParam to mode_param. This follows snakecase naming
convention and ensures a consistent naming style throughout the file.
Issue found by checkpatch.
Mutes the following checkpatch error:
CHECK: Avoid CamelCase: <pModeParam>
Signed-off-by: Dorcas AnonoLitunya <anonolitunya@gmail.com>
---
drivers/staging/sm750fb/ddk750_mode.c | 52 +++++++++++++--------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 8708995f676c..431b273a347a 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -14,13 +14,13 @@
* in bit 29:27 of Display Control register.
*/
static unsigned long
-display_control_adjust_SM750LE(struct mode_parameter *pModeParam,
+display_control_adjust_SM750LE(struct mode_parameter *mode_param,
unsigned long dispControl)
{
unsigned long x, y;
- x = pModeParam->horizontal_display_end;
- y = pModeParam->vertical_display_end;
+ x = mode_param->horizontal_display_end;
+ y = mode_param->vertical_display_end;
/*
* SM750LE has to set up the top-left and bottom-right
@@ -75,7 +75,7 @@ display_control_adjust_SM750LE(struct mode_parameter *pModeParam,
}
/* only timing related registers will be programed */
-static int programModeRegisters(struct mode_parameter *pModeParam,
+static int programModeRegisters(struct mode_parameter *mode_param,
struct pll_value *pll)
{
int ret = 0;
@@ -86,46 +86,46 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
/* programe secondary pixel clock */
poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
- tmp = ((pModeParam->horizontal_total - 1) <<
+ tmp = ((mode_param->horizontal_total - 1) <<
CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
- tmp |= (pModeParam->horizontal_display_end - 1) &
+ tmp |= (mode_param->horizontal_display_end - 1) &
CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
poke32(CRT_HORIZONTAL_TOTAL, tmp);
- tmp = (pModeParam->horizontal_sync_width <<
+ tmp = (mode_param->horizontal_sync_width <<
CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
CRT_HORIZONTAL_SYNC_WIDTH_MASK;
- tmp |= (pModeParam->horizontal_sync_start - 1) &
+ tmp |= (mode_param->horizontal_sync_start - 1) &
CRT_HORIZONTAL_SYNC_START_MASK;
poke32(CRT_HORIZONTAL_SYNC, tmp);
- tmp = ((pModeParam->vertical_total - 1) <<
+ tmp = ((mode_param->vertical_total - 1) <<
CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
CRT_VERTICAL_TOTAL_TOTAL_MASK;
- tmp |= (pModeParam->vertical_display_end - 1) &
+ tmp |= (mode_param->vertical_display_end - 1) &
CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
poke32(CRT_VERTICAL_TOTAL, tmp);
- tmp = ((pModeParam->vertical_sync_height <<
+ tmp = ((mode_param->vertical_sync_height <<
CRT_VERTICAL_SYNC_HEIGHT_SHIFT)) &
CRT_VERTICAL_SYNC_HEIGHT_MASK;
- tmp |= (pModeParam->vertical_sync_start - 1) &
+ tmp |= (mode_param->vertical_sync_start - 1) &
CRT_VERTICAL_SYNC_START_MASK;
poke32(CRT_VERTICAL_SYNC, tmp);
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
- if (pModeParam->vertical_sync_polarity)
+ if (mode_param->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
- if (pModeParam->horizontal_sync_polarity)
+ if (mode_param->horizontal_sync_polarity)
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
if (sm750_get_chip_type() == SM750LE) {
- display_control_adjust_SM750LE(pModeParam, tmp);
+ display_control_adjust_SM750LE(mode_param, tmp);
} else {
reg = peek32(CRT_DISPLAY_CTRL) &
~(DISPLAY_CTRL_VSYNC_PHASE |
@@ -140,40 +140,40 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
- reg = ((pModeParam->horizontal_total - 1) <<
+ reg = ((mode_param->horizontal_total - 1) <<
PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
- reg |= ((pModeParam->horizontal_display_end - 1) &
+ reg |= ((mode_param->horizontal_display_end - 1) &
PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
poke32(PANEL_HORIZONTAL_TOTAL, reg);
poke32(PANEL_HORIZONTAL_SYNC,
- ((pModeParam->horizontal_sync_width <<
+ ((mode_param->horizontal_sync_width <<
PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
- ((pModeParam->horizontal_sync_start - 1) &
+ ((mode_param->horizontal_sync_start - 1) &
PANEL_HORIZONTAL_SYNC_START_MASK));
poke32(PANEL_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
+ (((mode_param->vertical_total - 1) <<
PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
+ ((mode_param->vertical_display_end - 1) &
PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
poke32(PANEL_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
+ ((mode_param->vertical_sync_height <<
PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
+ ((mode_param->vertical_sync_start - 1) &
PANEL_VERTICAL_SYNC_START_MASK));
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
- if (pModeParam->vertical_sync_polarity)
+ if (mode_param->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
- if (pModeParam->horizontal_sync_polarity)
+ if (mode_param->horizontal_sync_polarity)
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
- if (pModeParam->clock_phase_polarity)
+ if (mode_param->clock_phase_polarity)
tmp |= DISPLAY_CTRL_CLOCK_PHASE;
reserved = PANEL_DISPLAY_CTRL_RESERVED_MASK |
--
2.42.0.345.gaab89be2eb
next prev parent reply other threads:[~2023-10-16 20:16 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-16 20:14 [PATCH v2 0/5] staging: sm750fb: Renaming camelcase to snakecase Dorcas AnonoLitunya
2023-10-16 20:14 ` [PATCH v2 1/5] Staging: sm750fb: Rename displayControlAdjust_SM750E Dorcas AnonoLitunya
2023-10-16 21:32 ` Andi Shyti
2023-10-17 9:04 ` Dorcas Litunya
2023-10-17 7:50 ` Greg Kroah-Hartman
2023-10-17 8:28 ` Dorcas Litunya
2023-10-17 8:34 ` Greg Kroah-Hartman
2023-10-17 8:44 ` Dorcas Litunya
2023-10-17 18:47 ` Dorcas Litunya
2023-10-18 13:27 ` Greg Kroah-Hartman
2023-10-16 20:14 ` Dorcas AnonoLitunya [this message]
2023-10-16 20:14 ` [PATCH v2 3/5] Staging: sm750fb: Rename dispControl Dorcas AnonoLitunya
2023-10-16 20:14 ` [PATCH v2 4/5] Staging: sm750fb: Rename programModeRegisters Dorcas AnonoLitunya
2023-10-17 7:51 ` Greg Kroah-Hartman
2023-10-16 20:14 ` [PATCH v2 5/5] Staging: sm750fb: Rename ddk750_setModeTiming Dorcas AnonoLitunya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231016201434.7880-3-anonolitunya@gmail.com \
--to=anonolitunya@gmail.com \
--cc=dan.carpenter@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=julia.lawall@inria.fr \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=outreachy@lists.linux.dev \
--cc=sudipm.mukherjee@gmail.com \
--cc=teddy.wang@siliconmotion.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).