[PATCH v3 13/20] drivers/video/fbdev/intelfb/intelfb_i2c.c: remove I2C_CLASS_DDC support

[Heiner Kallweit <hkallweit1@gmail.com>]

After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in
olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC.
Class-based device auto-detection is a legacy mechanism and shouldn't
be used in new code. So we can remove this class completely now.

Preferably this series should be applied via the i2c tree.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

---
 drivers/video/fbdev/intelfb/intelfb_i2c.c |   15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/video/fbdev/intelfb/intelfb_i2c.c b/drivers/video/fbdev/intelfb/intelfb_i2c.c
index 3300bd31d..f24c7cb4c 100644
--- a/drivers/video/fbdev/intelfb/intelfb_i2c.c
+++ b/drivers/video/fbdev/intelfb/intelfb_i2c.c
@@ -99,8 +99,7 @@ static int intelfb_gpio_getsda(void *data)
 
 static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo,
 				 struct intelfb_i2c_chan *chan,
-				 const u32 reg, const char *name,
-				 int class)
+				 const u32 reg, const char *name)
 {
 	int rc;
 
@@ -108,7 +107,6 @@ static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo,
 	chan->reg			= reg;
 	snprintf(chan->adapter.name, sizeof(chan->adapter.name),
 		 "intelfb %s", name);
-	chan->adapter.class		= class;
 	chan->adapter.owner		= THIS_MODULE;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->dinfo->pdev->dev;
@@ -144,8 +142,7 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo)
 	dinfo->output[i].type = INTELFB_OUTPUT_ANALOG;
 
 	/* setup the DDC bus for analog output */
-	intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, GPIOA,
-			      "CRTDDC_A", I2C_CLASS_DDC);
+	intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, GPIOA, "CRTDDC_A");
 	i++;
 
 	/* need to add the output busses for each device
@@ -159,10 +156,8 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo)
 	case INTEL_855GM:
 	case INTEL_865G:
 		dinfo->output[i].type = INTELFB_OUTPUT_DVO;
-		intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus,
-				      GPIOD, "DVODDC_D", I2C_CLASS_DDC);
-		intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus,
-				      GPIOE, "DVOI2C_E", 0);
+		intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, GPIOD, "DVODDC_D");
+		intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus, GPIOE, "DVOI2C_E");
 		i++;
 		break;
 	case INTEL_915G:
@@ -176,7 +171,7 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo)
 		/* SDVO ports have a single control bus - 2 devices */
 		dinfo->output[i].type = INTELFB_OUTPUT_SDVO;
 		intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus,
-				      GPIOE, "SDVOCTRL_E", 0);
+				      GPIOE, "SDVOCTRL_E");
 		/* TODO: initialize the SDVO */
 		/* I830SDVOInit(pScrn, i, DVOB); */
 		i++;