[PATCH v2 3/9] mfd: pcF50633-gpio: Remove

[linux@treblig.org]

From: "Dr. David Alan Gilbert" <linux@treblig.org>

The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")

See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
---
 arch/mips/configs/ip27_defconfig  |  1 -
 drivers/mfd/Kconfig               |  7 ---
 drivers/mfd/Makefile              |  1 -
 drivers/mfd/pcf50633-gpio.c       | 92 -------------------------------
 include/linux/mfd/pcf50633/gpio.h | 48 ----------------
 5 files changed, 149 deletions(-)
 delete mode 100644 drivers/mfd/pcf50633-gpio.c
 delete mode 100644 include/linux/mfd/pcf50633/gpio.h

diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 66085bb71bc4..0a9ec09aff65 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -256,7 +256,6 @@ CONFIG_I2C_STUB=m
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_MFD_PCF50633=m
-CONFIG_PCF50633_GPIO=m
 # CONFIG_VGA_ARB is not set
 CONFIG_LEDS_LP3944=m
 CONFIG_LEDS_PCA955X=m
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 051272126fe1..766453ef6c2d 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1129,13 +1129,6 @@ config MFD_PCF50633
 	  facilities, and registers devices for the various functions
 	  so that function-specific drivers can bind to them.
 
-config PCF50633_GPIO
-	tristate "NXP PCF50633 GPIO"
-	depends on MFD_PCF50633
-	help
-	  Say yes here if you want to include support GPIO for pins on
-	  the PCF50633 chip.
-
 config MFD_PM8XXX
 	tristate "Qualcomm PM8xxx PMIC chips driver"
 	depends on ARM || HEXAGON || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index e085da3f13c3..d769e40251c8 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -185,7 +185,6 @@ obj-$(CONFIG_MFD_MT6397)	+= mt6397.o
 
 pcf50633-objs			:= pcf50633-core.o pcf50633-irq.o
 obj-$(CONFIG_MFD_PCF50633)	+= pcf50633.o
-obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_RZ_MTU3)		+= rz-mtu3.o
 obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
 obj-$(CONFIG_MFD_DB8500_PRCMU)	+= db8500-prcmu.o
diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c
deleted file mode 100644
index 3e368219479a..000000000000
--- a/drivers/mfd/pcf50633-gpio.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* NXP PCF50633 GPIO Driver
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * Author: Balaji Rao <balajirrao@openmoko.org>
- * All rights reserved.
- *
- * Broken down from monstrous PCF50633 driver mainly by
- * Harald Welte, Andy Green and Werner Almesberger
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-
-static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
-	[PCF50633_REGULATOR_AUTO]	= PCF50633_REG_AUTOOUT,
-	[PCF50633_REGULATOR_DOWN1]	= PCF50633_REG_DOWN1OUT,
-	[PCF50633_REGULATOR_DOWN2]	= PCF50633_REG_DOWN2OUT,
-	[PCF50633_REGULATOR_MEMLDO]	= PCF50633_REG_MEMLDOOUT,
-	[PCF50633_REGULATOR_LDO1]	= PCF50633_REG_LDO1OUT,
-	[PCF50633_REGULATOR_LDO2]	= PCF50633_REG_LDO2OUT,
-	[PCF50633_REGULATOR_LDO3]	= PCF50633_REG_LDO3OUT,
-	[PCF50633_REGULATOR_LDO4]	= PCF50633_REG_LDO4OUT,
-	[PCF50633_REGULATOR_LDO5]	= PCF50633_REG_LDO5OUT,
-	[PCF50633_REGULATOR_LDO6]	= PCF50633_REG_LDO6OUT,
-	[PCF50633_REGULATOR_HCLDO]	= PCF50633_REG_HCLDOOUT,
-};
-
-int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val)
-{
-	u8 reg;
-
-	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
-
-	return pcf50633_reg_set_bit_mask(pcf, reg, 0x07, val);
-}
-EXPORT_SYMBOL_GPL(pcf50633_gpio_set);
-
-u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio)
-{
-	u8 reg, val;
-
-	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
-	val = pcf50633_reg_read(pcf, reg) & 0x07;
-
-	return val;
-}
-EXPORT_SYMBOL_GPL(pcf50633_gpio_get);
-
-int pcf50633_gpio_invert_set(struct pcf50633 *pcf, int gpio, int invert)
-{
-	u8 val, reg;
-
-	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
-	val = !!invert << 3;
-
-	return pcf50633_reg_set_bit_mask(pcf, reg, 1 << 3, val);
-}
-EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_set);
-
-int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio)
-{
-	u8 reg, val;
-
-	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
-	val = pcf50633_reg_read(pcf, reg);
-
-	return val & (1 << 3);
-}
-EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_get);
-
-int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
-					int gpio, int regulator, int on)
-{
-	u8 reg, val, mask;
-
-	/* the *ENA register is always one after the *OUT register */
-	reg = pcf50633_regulator_registers[regulator] + 1;
-
-	val = !!on << (gpio - PCF50633_GPIO1);
-	mask = 1 << (gpio - PCF50633_GPIO1);
-
-	return pcf50633_reg_set_bit_mask(pcf, reg, mask, val);
-}
-EXPORT_SYMBOL_GPL(pcf50633_gpio_power_supply_set);
-
-MODULE_DESCRIPTION("NXP PCF50633 GPIO Driver");
-MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/pcf50633/gpio.h b/include/linux/mfd/pcf50633/gpio.h
deleted file mode 100644
index f589e35795f1..000000000000
--- a/include/linux/mfd/pcf50633/gpio.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * gpio.h -- GPIO driver for NXP PCF50633
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * All rights reserved.
- */
-
-#ifndef __LINUX_MFD_PCF50633_GPIO_H
-#define __LINUX_MFD_PCF50633_GPIO_H
-
-#include <linux/mfd/pcf50633/core.h>
-
-#define PCF50633_GPIO1		1
-#define PCF50633_GPIO2		2
-#define PCF50633_GPIO3		3
-#define PCF50633_GPO		4
-
-#define PCF50633_REG_GPIO1CFG	0x14
-#define PCF50633_REG_GPIO2CFG	0x15
-#define PCF50633_REG_GPIO3CFG	0x16
-#define PCF50633_REG_GPOCFG 	0x17
-
-#define PCF50633_GPOCFG_GPOSEL_MASK	0x07
-
-enum pcf50633_reg_gpocfg {
-	PCF50633_GPOCFG_GPOSEL_0	= 0x00,
-	PCF50633_GPOCFG_GPOSEL_LED_NFET	= 0x01,
-	PCF50633_GPOCFG_GPOSEL_SYSxOK	= 0x02,
-	PCF50633_GPOCFG_GPOSEL_CLK32K	= 0x03,
-	PCF50633_GPOCFG_GPOSEL_ADAPUSB	= 0x04,
-	PCF50633_GPOCFG_GPOSEL_USBxOK	= 0x05,
-	PCF50633_GPOCFG_GPOSEL_ACTPH4	= 0x06,
-	PCF50633_GPOCFG_GPOSEL_1	= 0x07,
-	PCF50633_GPOCFG_GPOSEL_INVERSE	= 0x08,
-};
-
-int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val);
-u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio);
-
-int pcf50633_gpio_invert_set(struct pcf50633 *, int gpio, int invert);
-int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio);
-
-int pcf50633_gpio_power_supply_set(struct pcf50633 *,
-					int gpio, int regulator, int on);
-#endif /* __LINUX_MFD_PCF50633_GPIO_H */
-
-
-- 
2.48.1