* [PATCH v2 1/2] Driver: hv: Add CONFIG_HYPERV_VMBUS option
2025-09-15 23:46 [PATCH v2 0/2] Fix CONFIG_HYPERV and vmbus related anamoly Mukesh Rathor
@ 2025-09-15 23:46 ` Mukesh Rathor
2025-09-16 15:50 ` Bjorn Helgaas
2025-09-15 23:46 ` [PATCH v2 2/2] Drivers: hv: Make CONFIG_HYPERV bool Mukesh Rathor
2025-10-01 0:01 ` [PATCH v2 0/2] Fix CONFIG_HYPERV and vmbus related anamoly Wei Liu
2 siblings, 1 reply; 5+ messages in thread
From: Mukesh Rathor @ 2025-09-15 23:46 UTC (permalink / raw)
To: dri-devel, linux-kernel, linux-input, linux-hyperv, netdev,
linux-pci, linux-scsi, linux-fbdev, linux-arch, virtualization
Cc: maarten.lankhorst, mripard, tzimmermann, airlied, simona, jikos,
bentiss, kys, haiyangz, wei.liu, decui, dmitry.torokhov,
andrew+netdev, davem, edumazet, kuba, pabeni, bhelgaas,
James.Bottomley, martin.petersen, gregkh, deller, arnd, sgarzare,
horms
At present VMBus driver is hinged off of CONFIG_HYPERV which entails
lot of builtin code and encompasses too much. It's not always clear
what depends on builtin hv code and what depends on VMBus. Setting
CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
adds even more confusion. VMBus is an independent module and should have
its own config option. Also, there are scenarios like baremetal dom0/root
where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
there are more features coming down that use CONFIG_HYPERV and add more
dependencies on it.
So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
dependency on VMBus.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
---
drivers/gpu/drm/Kconfig | 2 +-
drivers/hid/Kconfig | 2 +-
drivers/hv/Kconfig | 11 +++++++++--
drivers/hv/Makefile | 2 +-
drivers/input/serio/Kconfig | 4 ++--
drivers/net/hyperv/Kconfig | 2 +-
drivers/pci/Kconfig | 2 +-
drivers/scsi/Kconfig | 2 +-
drivers/uio/Kconfig | 2 +-
drivers/video/fbdev/Kconfig | 2 +-
include/asm-generic/mshyperv.h | 8 +++++---
net/vmw_vsock/Kconfig | 2 +-
12 files changed, 25 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index f7ea8e895c0c..58f34da061c6 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -398,7 +398,7 @@ source "drivers/gpu/drm/imagination/Kconfig"
config DRM_HYPERV
tristate "DRM Support for Hyper-V synthetic video device"
- depends on DRM && PCI && HYPERV
+ depends on DRM && PCI && HYPERV_VMBUS
select DRM_CLIENT_SELECTION
select DRM_KMS_HELPER
select DRM_GEM_SHMEM_HELPER
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index a57901203aeb..fe3dc8c0db99 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1162,7 +1162,7 @@ config GREENASIA_FF
config HID_HYPERV_MOUSE
tristate "Microsoft Hyper-V mouse driver"
- depends on HYPERV
+ depends on HYPERV_VMBUS
help
Select this option to enable the Hyper-V mouse driver.
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index e24f6299c376..29f8637f441a 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -45,18 +45,25 @@ config HYPERV_TIMER
config HYPERV_UTILS
tristate "Microsoft Hyper-V Utilities driver"
- depends on HYPERV && CONNECTOR && NLS
+ depends on HYPERV_VMBUS && CONNECTOR && NLS
depends on PTP_1588_CLOCK_OPTIONAL
help
Select this option to enable the Hyper-V Utilities.
config HYPERV_BALLOON
tristate "Microsoft Hyper-V Balloon driver"
- depends on HYPERV
+ depends on HYPERV_VMBUS
select PAGE_REPORTING
help
Select this option to enable Hyper-V Balloon driver.
+config HYPERV_VMBUS
+ tristate "Microsoft Hyper-V VMBus driver"
+ depends on HYPERV
+ default HYPERV
+ help
+ Select this option to enable Hyper-V Vmbus driver.
+
config MSHV_ROOT
tristate "Microsoft Hyper-V root partition support"
depends on HYPERV && (X86_64 || ARM64)
diff --git a/drivers/hv/Makefile b/drivers/hv/Makefile
index 976189c725dc..4bb41663767d 100644
--- a/drivers/hv/Makefile
+++ b/drivers/hv/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_HYPERV) += hv_vmbus.o
+obj-$(CONFIG_HYPERV_VMBUS) += hv_vmbus.o
obj-$(CONFIG_HYPERV_UTILS) += hv_utils.o
obj-$(CONFIG_HYPERV_BALLOON) += hv_balloon.o
obj-$(CONFIG_MSHV_ROOT) += mshv_root.o
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 17edc1597446..c7ef347a4dff 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -276,8 +276,8 @@ config SERIO_OLPC_APSP
config HYPERV_KEYBOARD
tristate "Microsoft Synthetic Keyboard driver"
- depends on HYPERV
- default HYPERV
+ depends on HYPERV_VMBUS
+ default HYPERV_VMBUS
help
Select this option to enable the Hyper-V Keyboard driver.
diff --git a/drivers/net/hyperv/Kconfig b/drivers/net/hyperv/Kconfig
index c8cbd85adcf9..982964c1a9fb 100644
--- a/drivers/net/hyperv/Kconfig
+++ b/drivers/net/hyperv/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config HYPERV_NET
tristate "Microsoft Hyper-V virtual network driver"
- depends on HYPERV
+ depends on HYPERV_VMBUS
select UCS2_STRING
select NLS
help
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 9a249c65aedc..7065a8e5f9b1 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -221,7 +221,7 @@ config PCI_LABEL
config PCI_HYPERV
tristate "Hyper-V PCI Frontend"
- depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI && SYSFS
+ depends on ((X86 && X86_64) || ARM64) && HYPERV_VMBUS && PCI_MSI && SYSFS
select PCI_HYPERV_INTERFACE
select IRQ_MSI_LIB
help
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 5522310bab8d..19d0884479a2 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -589,7 +589,7 @@ config XEN_SCSI_FRONTEND
config HYPERV_STORAGE
tristate "Microsoft Hyper-V virtual storage driver"
- depends on SCSI && HYPERV
+ depends on SCSI && HYPERV_VMBUS
depends on m || SCSI_FC_ATTRS != m
default HYPERV
help
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index b060dcd7c635..6f86a61231e6 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -140,7 +140,7 @@ config UIO_MF624
config UIO_HV_GENERIC
tristate "Generic driver for Hyper-V VMBus"
- depends on HYPERV
+ depends on HYPERV_VMBUS
help
Generic driver that you can bind, dynamically, to any
Hyper-V VMBus device. It is useful to provide direct access
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index c21484d15f0c..72c63eaeb983 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1774,7 +1774,7 @@ config FB_BROADSHEET
config FB_HYPERV
tristate "Microsoft Hyper-V Synthetic Video support"
- depends on FB && HYPERV
+ depends on FB && HYPERV_VMBUS
select DMA_CMA if HAVE_DMA_CONTIGUOUS && CMA
select FB_IOMEM_HELPERS_DEFERRED
help
diff --git a/include/asm-generic/mshyperv.h b/include/asm-generic/mshyperv.h
index dbd4c2f3aee3..64ba6bc807d9 100644
--- a/include/asm-generic/mshyperv.h
+++ b/include/asm-generic/mshyperv.h
@@ -163,6 +163,7 @@ static inline u64 hv_generate_guest_id(u64 kernel_version)
return guest_id;
}
+#if IS_ENABLED(CONFIG_HYPERV_VMBUS)
/* Free the message slot and signal end-of-message if required */
static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
{
@@ -198,6 +199,10 @@ static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
}
}
+extern int vmbus_interrupt;
+extern int vmbus_irq;
+#endif /* CONFIG_HYPERV_VMBUS */
+
int hv_get_hypervisor_version(union hv_hypervisor_version_info *info);
void hv_setup_vmbus_handler(void (*handler)(void));
@@ -211,9 +216,6 @@ void hv_setup_crash_handler(void (*handler)(struct pt_regs *regs));
void hv_remove_crash_handler(void);
void hv_setup_mshv_handler(void (*handler)(void));
-extern int vmbus_interrupt;
-extern int vmbus_irq;
-
#if IS_ENABLED(CONFIG_HYPERV)
/*
* Hypervisor's notion of virtual processor ID is different from
diff --git a/net/vmw_vsock/Kconfig b/net/vmw_vsock/Kconfig
index 56356d2980c8..8e803c4828c4 100644
--- a/net/vmw_vsock/Kconfig
+++ b/net/vmw_vsock/Kconfig
@@ -72,7 +72,7 @@ config VIRTIO_VSOCKETS_COMMON
config HYPERV_VSOCKETS
tristate "Hyper-V transport for Virtual Sockets"
- depends on VSOCKETS && HYPERV
+ depends on VSOCKETS && HYPERV_VMBUS
help
This module implements a Hyper-V transport for Virtual Sockets.
--
2.36.1.vfs.0.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v2 1/2] Driver: hv: Add CONFIG_HYPERV_VMBUS option
2025-09-15 23:46 ` [PATCH v2 1/2] Driver: hv: Add CONFIG_HYPERV_VMBUS option Mukesh Rathor
@ 2025-09-16 15:50 ` Bjorn Helgaas
0 siblings, 0 replies; 5+ messages in thread
From: Bjorn Helgaas @ 2025-09-16 15:50 UTC (permalink / raw)
To: Mukesh Rathor
Cc: dri-devel, linux-kernel, linux-input, linux-hyperv, netdev,
linux-pci, linux-scsi, linux-fbdev, linux-arch, virtualization,
maarten.lankhorst, mripard, tzimmermann, airlied, simona, jikos,
bentiss, kys, haiyangz, wei.liu, decui, dmitry.torokhov,
andrew+netdev, davem, edumazet, kuba, pabeni, bhelgaas,
James.Bottomley, martin.petersen, gregkh, deller, arnd, sgarzare,
horms
On Mon, Sep 15, 2025 at 04:46:03PM -0700, Mukesh Rathor wrote:
> At present VMBus driver is hinged off of CONFIG_HYPERV which entails
> lot of builtin code and encompasses too much. It's not always clear
> what depends on builtin hv code and what depends on VMBus. Setting
> CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
> adds even more confusion. VMBus is an independent module and should have
> its own config option. Also, there are scenarios like baremetal dom0/root
> where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
> there are more features coming down that use CONFIG_HYPERV and add more
> dependencies on it.
>
> So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
> dependency on VMBus.
>
> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
> ---
> drivers/gpu/drm/Kconfig | 2 +-
> drivers/hid/Kconfig | 2 +-
> drivers/hv/Kconfig | 11 +++++++++--
> drivers/hv/Makefile | 2 +-
> drivers/input/serio/Kconfig | 4 ++--
> drivers/net/hyperv/Kconfig | 2 +-
> drivers/pci/Kconfig | 2 +-
> drivers/scsi/Kconfig | 2 +-
> drivers/uio/Kconfig | 2 +-
> drivers/video/fbdev/Kconfig | 2 +-
> include/asm-generic/mshyperv.h | 8 +++++---
> net/vmw_vsock/Kconfig | 2 +-
> 12 files changed, 25 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index f7ea8e895c0c..58f34da061c6 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -398,7 +398,7 @@ source "drivers/gpu/drm/imagination/Kconfig"
>
> config DRM_HYPERV
> tristate "DRM Support for Hyper-V synthetic video device"
> - depends on DRM && PCI && HYPERV
> + depends on DRM && PCI && HYPERV_VMBUS
> select DRM_CLIENT_SELECTION
> select DRM_KMS_HELPER
> select DRM_GEM_SHMEM_HELPER
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index a57901203aeb..fe3dc8c0db99 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
> @@ -1162,7 +1162,7 @@ config GREENASIA_FF
>
> config HID_HYPERV_MOUSE
> tristate "Microsoft Hyper-V mouse driver"
> - depends on HYPERV
> + depends on HYPERV_VMBUS
> help
> Select this option to enable the Hyper-V mouse driver.
>
> diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
> index e24f6299c376..29f8637f441a 100644
> --- a/drivers/hv/Kconfig
> +++ b/drivers/hv/Kconfig
> @@ -45,18 +45,25 @@ config HYPERV_TIMER
>
> config HYPERV_UTILS
> tristate "Microsoft Hyper-V Utilities driver"
> - depends on HYPERV && CONNECTOR && NLS
> + depends on HYPERV_VMBUS && CONNECTOR && NLS
> depends on PTP_1588_CLOCK_OPTIONAL
> help
> Select this option to enable the Hyper-V Utilities.
>
> config HYPERV_BALLOON
> tristate "Microsoft Hyper-V Balloon driver"
> - depends on HYPERV
> + depends on HYPERV_VMBUS
> select PAGE_REPORTING
> help
> Select this option to enable Hyper-V Balloon driver.
>
> +config HYPERV_VMBUS
> + tristate "Microsoft Hyper-V VMBus driver"
> + depends on HYPERV
> + default HYPERV
> + help
> + Select this option to enable Hyper-V Vmbus driver.
> +
> config MSHV_ROOT
> tristate "Microsoft Hyper-V root partition support"
> depends on HYPERV && (X86_64 || ARM64)
> diff --git a/drivers/hv/Makefile b/drivers/hv/Makefile
> index 976189c725dc..4bb41663767d 100644
> --- a/drivers/hv/Makefile
> +++ b/drivers/hv/Makefile
> @@ -1,5 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> -obj-$(CONFIG_HYPERV) += hv_vmbus.o
> +obj-$(CONFIG_HYPERV_VMBUS) += hv_vmbus.o
> obj-$(CONFIG_HYPERV_UTILS) += hv_utils.o
> obj-$(CONFIG_HYPERV_BALLOON) += hv_balloon.o
> obj-$(CONFIG_MSHV_ROOT) += mshv_root.o
> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
> index 17edc1597446..c7ef347a4dff 100644
> --- a/drivers/input/serio/Kconfig
> +++ b/drivers/input/serio/Kconfig
> @@ -276,8 +276,8 @@ config SERIO_OLPC_APSP
>
> config HYPERV_KEYBOARD
> tristate "Microsoft Synthetic Keyboard driver"
> - depends on HYPERV
> - default HYPERV
> + depends on HYPERV_VMBUS
> + default HYPERV_VMBUS
> help
> Select this option to enable the Hyper-V Keyboard driver.
>
> diff --git a/drivers/net/hyperv/Kconfig b/drivers/net/hyperv/Kconfig
> index c8cbd85adcf9..982964c1a9fb 100644
> --- a/drivers/net/hyperv/Kconfig
> +++ b/drivers/net/hyperv/Kconfig
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0-only
> config HYPERV_NET
> tristate "Microsoft Hyper-V virtual network driver"
> - depends on HYPERV
> + depends on HYPERV_VMBUS
> select UCS2_STRING
> select NLS
> help
> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> index 9a249c65aedc..7065a8e5f9b1 100644
> --- a/drivers/pci/Kconfig
> +++ b/drivers/pci/Kconfig
> @@ -221,7 +221,7 @@ config PCI_LABEL
>
> config PCI_HYPERV
> tristate "Hyper-V PCI Frontend"
> - depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI && SYSFS
> + depends on ((X86 && X86_64) || ARM64) && HYPERV_VMBUS && PCI_MSI && SYSFS
> select PCI_HYPERV_INTERFACE
> select IRQ_MSI_LIB
> help
> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
> index 5522310bab8d..19d0884479a2 100644
> --- a/drivers/scsi/Kconfig
> +++ b/drivers/scsi/Kconfig
> @@ -589,7 +589,7 @@ config XEN_SCSI_FRONTEND
>
> config HYPERV_STORAGE
> tristate "Microsoft Hyper-V virtual storage driver"
> - depends on SCSI && HYPERV
> + depends on SCSI && HYPERV_VMBUS
> depends on m || SCSI_FC_ATTRS != m
> default HYPERV
> help
> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> index b060dcd7c635..6f86a61231e6 100644
> --- a/drivers/uio/Kconfig
> +++ b/drivers/uio/Kconfig
> @@ -140,7 +140,7 @@ config UIO_MF624
>
> config UIO_HV_GENERIC
> tristate "Generic driver for Hyper-V VMBus"
> - depends on HYPERV
> + depends on HYPERV_VMBUS
> help
> Generic driver that you can bind, dynamically, to any
> Hyper-V VMBus device. It is useful to provide direct access
> diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
> index c21484d15f0c..72c63eaeb983 100644
> --- a/drivers/video/fbdev/Kconfig
> +++ b/drivers/video/fbdev/Kconfig
> @@ -1774,7 +1774,7 @@ config FB_BROADSHEET
>
> config FB_HYPERV
> tristate "Microsoft Hyper-V Synthetic Video support"
> - depends on FB && HYPERV
> + depends on FB && HYPERV_VMBUS
> select DMA_CMA if HAVE_DMA_CONTIGUOUS && CMA
> select FB_IOMEM_HELPERS_DEFERRED
> help
> diff --git a/include/asm-generic/mshyperv.h b/include/asm-generic/mshyperv.h
> index dbd4c2f3aee3..64ba6bc807d9 100644
> --- a/include/asm-generic/mshyperv.h
> +++ b/include/asm-generic/mshyperv.h
> @@ -163,6 +163,7 @@ static inline u64 hv_generate_guest_id(u64 kernel_version)
> return guest_id;
> }
>
> +#if IS_ENABLED(CONFIG_HYPERV_VMBUS)
> /* Free the message slot and signal end-of-message if required */
> static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
> {
> @@ -198,6 +199,10 @@ static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
> }
> }
>
> +extern int vmbus_interrupt;
> +extern int vmbus_irq;
> +#endif /* CONFIG_HYPERV_VMBUS */
> +
> int hv_get_hypervisor_version(union hv_hypervisor_version_info *info);
>
> void hv_setup_vmbus_handler(void (*handler)(void));
> @@ -211,9 +216,6 @@ void hv_setup_crash_handler(void (*handler)(struct pt_regs *regs));
> void hv_remove_crash_handler(void);
> void hv_setup_mshv_handler(void (*handler)(void));
>
> -extern int vmbus_interrupt;
> -extern int vmbus_irq;
> -
> #if IS_ENABLED(CONFIG_HYPERV)
> /*
> * Hypervisor's notion of virtual processor ID is different from
> diff --git a/net/vmw_vsock/Kconfig b/net/vmw_vsock/Kconfig
> index 56356d2980c8..8e803c4828c4 100644
> --- a/net/vmw_vsock/Kconfig
> +++ b/net/vmw_vsock/Kconfig
> @@ -72,7 +72,7 @@ config VIRTIO_VSOCKETS_COMMON
>
> config HYPERV_VSOCKETS
> tristate "Hyper-V transport for Virtual Sockets"
> - depends on VSOCKETS && HYPERV
> + depends on VSOCKETS && HYPERV_VMBUS
> help
> This module implements a Hyper-V transport for Virtual Sockets.
>
> --
> 2.36.1.vfs.0.0
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] Drivers: hv: Make CONFIG_HYPERV bool
2025-09-15 23:46 [PATCH v2 0/2] Fix CONFIG_HYPERV and vmbus related anamoly Mukesh Rathor
2025-09-15 23:46 ` [PATCH v2 1/2] Driver: hv: Add CONFIG_HYPERV_VMBUS option Mukesh Rathor
@ 2025-09-15 23:46 ` Mukesh Rathor
2025-10-01 0:01 ` [PATCH v2 0/2] Fix CONFIG_HYPERV and vmbus related anamoly Wei Liu
2 siblings, 0 replies; 5+ messages in thread
From: Mukesh Rathor @ 2025-09-15 23:46 UTC (permalink / raw)
To: dri-devel, linux-kernel, linux-input, linux-hyperv, netdev,
linux-pci, linux-scsi, linux-fbdev, linux-arch, virtualization
Cc: maarten.lankhorst, mripard, tzimmermann, airlied, simona, jikos,
bentiss, kys, haiyangz, wei.liu, decui, dmitry.torokhov,
andrew+netdev, davem, edumazet, kuba, pabeni, bhelgaas,
James.Bottomley, martin.petersen, gregkh, deller, arnd, sgarzare,
horms
With CONFIG_HYPERV and CONFIG_HYPERV_VMBUS separated, change CONFIG_HYPERV
to bool from tristate. CONFIG_HYPERV now becomes the core Hyper-V
hypervisor support, such as hypercalls, clocks/timers, Confidential
Computing setup, PCI passthru, etc. that doesn't involve VMBus or VMBus
devices.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
---
drivers/Makefile | 2 +-
drivers/hv/Kconfig | 2 +-
drivers/hv/Makefile | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/Makefile b/drivers/Makefile
index b5749cf67044..7ad5744db0b6 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -161,7 +161,7 @@ obj-$(CONFIG_SOUNDWIRE) += soundwire/
# Virtualization drivers
obj-$(CONFIG_VIRT_DRIVERS) += virt/
-obj-$(subst m,y,$(CONFIG_HYPERV)) += hv/
+obj-$(CONFIG_HYPERV) += hv/
obj-$(CONFIG_PM_DEVFREQ) += devfreq/
obj-$(CONFIG_EXTCON) += extcon/
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index 29f8637f441a..0b8c391a0342 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -3,7 +3,7 @@
menu "Microsoft Hyper-V guest support"
config HYPERV
- tristate "Microsoft Hyper-V client drivers"
+ bool "Microsoft Hyper-V core hypervisor support"
depends on (X86 && X86_LOCAL_APIC && HYPERVISOR_GUEST) \
|| (ARM64 && !CPU_BIG_ENDIAN)
select PARAVIRT
diff --git a/drivers/hv/Makefile b/drivers/hv/Makefile
index 4bb41663767d..1a1677bf4dac 100644
--- a/drivers/hv/Makefile
+++ b/drivers/hv/Makefile
@@ -16,5 +16,5 @@ mshv_root-y := mshv_root_main.o mshv_synic.o mshv_eventfd.o mshv_irq.o \
mshv_root_hv_call.o mshv_portid_table.o
# Code that must be built-in
-obj-$(subst m,y,$(CONFIG_HYPERV)) += hv_common.o
+obj-$(CONFIG_HYPERV) += hv_common.o
obj-$(subst m,y,$(CONFIG_MSHV_ROOT)) += hv_proc.o mshv_common.o
--
2.36.1.vfs.0.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 0/2] Fix CONFIG_HYPERV and vmbus related anamoly
2025-09-15 23:46 [PATCH v2 0/2] Fix CONFIG_HYPERV and vmbus related anamoly Mukesh Rathor
2025-09-15 23:46 ` [PATCH v2 1/2] Driver: hv: Add CONFIG_HYPERV_VMBUS option Mukesh Rathor
2025-09-15 23:46 ` [PATCH v2 2/2] Drivers: hv: Make CONFIG_HYPERV bool Mukesh Rathor
@ 2025-10-01 0:01 ` Wei Liu
2 siblings, 0 replies; 5+ messages in thread
From: Wei Liu @ 2025-10-01 0:01 UTC (permalink / raw)
To: Mukesh Rathor
Cc: dri-devel, linux-kernel, linux-input, linux-hyperv, netdev,
linux-pci, linux-scsi, linux-fbdev, linux-arch, virtualization,
maarten.lankhorst, mripard, tzimmermann, airlied, simona, jikos,
bentiss, kys, haiyangz, wei.liu, decui, dmitry.torokhov,
andrew+netdev, davem, edumazet, kuba, pabeni, bhelgaas,
James.Bottomley, martin.petersen, gregkh, deller, arnd, sgarzare,
horms
On Mon, Sep 15, 2025 at 04:46:02PM -0700, Mukesh Rathor wrote:
> At present, drivers/Makefile will subst =m to =y for CONFIG_HYPERV
> for hv subdir. Also, drivers/hv/Makefile replaces =m to =y to build in
> hv_common.c that is needed for the drivers. Moreover, vmbus driver is
> built if CONFIG_HYPER is set, either loadable or builtin.
>
> This is not a good approach. CONFIG_HYPERV is really an umbrella
> config that encompasses builtin code and various other things and not
> a dedicated config option for VMBus. VMBus should really have a config
> option just like CONFIG_HYPERV_BALLOON etc. This small series introduces
> CONFIG_HYPERV_VMBUS to build VMBus driver and make that distinction
> explicit. With that CONFIG_HYPERV could be changed to bool.
>
> For now, hv_common.c is left as is to reduce conflicts for upcoming
> patches, but once merges are mostly done, that and some others should
> be moved to virt/hyperv directory.
>
> V2:
> o rebased on hyper-next: commit 553d825fb2f0
> ("x86/hyperv: Switch to msi_create_parent_irq_domain()")
>
> V1:
> o Change subject from hyper-v to "Drivers: hv:"
> o Rewrite commit messages paying attention to VMBus and not vmbus
> o Change some wordings in Kconfig
> o Make new VMBUS config option default to HYPERV option for a smoother
> transition
>
> Mukesh Rathor (2):
> Driver: hv: Add CONFIG_HYPERV_VMBUS option
I changed Driver to Drivers and applied both patches. Thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread