From: Gabriel Windlin <gawindlin@gmail.com>
To: Sudip Mukherjee <sudipm.mukherjee@gmail.com>,
Teddy Wang <teddy.wang@siliconmotion.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-fbdev@vger.kernel.org, linux-staging@lists.linux.dev,
linux-kernel@vger.kernel.org
Cc: Gabriel Windlin <gawindlin@gmail.com>
Subject: [PATCH 6/8] staging: sm750fb: remove unused interrupt register definitions
Date: Wed, 4 Mar 2026 00:24:27 +0100 [thread overview]
Message-ID: <20260303232434.1850583-6-gawindlin@gmail.com> (raw)
In-Reply-To: <20260303232434.1850583-1-gawindlin@gmail.com>
The RAW_INT, INT_STATUS, and INT_MASK register macros defined in
ddk750_reg.h are not referenced anywhere in the driver. Remove them
to reduce dead code as noted in the TODO file.
Signed-off-by: Gabriel Windlin <gawindlin@gmail.com>
---
drivers/staging/sm750fb/ddk750_reg.h | 51 ----------------------------
1 file changed, 51 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h
index dd1d67fb9856..8f227d974613 100644
--- a/drivers/staging/sm750fb/ddk750_reg.h
+++ b/drivers/staging/sm750fb/ddk750_reg.h
@@ -77,57 +77,6 @@
#define GPIO_MUX 0x000008
-#define RAW_INT 0x000020
-#define RAW_INT_ZVPORT1_VSYNC BIT(4)
-#define RAW_INT_ZVPORT0_VSYNC BIT(3)
-#define RAW_INT_CRT_VSYNC BIT(2)
-#define RAW_INT_PANEL_VSYNC BIT(1)
-#define RAW_INT_VGA_VSYNC BIT(0)
-
-#define INT_STATUS 0x000024
-#define INT_STATUS_GPIO31 BIT(31)
-#define INT_STATUS_GPIO30 BIT(30)
-#define INT_STATUS_GPIO29 BIT(29)
-#define INT_STATUS_GPIO28 BIT(28)
-#define INT_STATUS_GPIO27 BIT(27)
-#define INT_STATUS_GPIO26 BIT(26)
-#define INT_STATUS_GPIO25 BIT(25)
-#define INT_STATUS_I2C BIT(12)
-#define INT_STATUS_PWM BIT(11)
-#define INT_STATUS_DMA1 BIT(10)
-#define INT_STATUS_DMA0 BIT(9)
-#define INT_STATUS_PCI BIT(8)
-#define INT_STATUS_SSP1 BIT(7)
-#define INT_STATUS_SSP0 BIT(6)
-#define INT_STATUS_DE BIT(5)
-#define INT_STATUS_ZVPORT1_VSYNC BIT(4)
-#define INT_STATUS_ZVPORT0_VSYNC BIT(3)
-#define INT_STATUS_CRT_VSYNC BIT(2)
-#define INT_STATUS_PANEL_VSYNC BIT(1)
-#define INT_STATUS_VGA_VSYNC BIT(0)
-
-#define INT_MASK 0x000028
-#define INT_MASK_GPIO31 BIT(31)
-#define INT_MASK_GPIO30 BIT(30)
-#define INT_MASK_GPIO29 BIT(29)
-#define INT_MASK_GPIO28 BIT(28)
-#define INT_MASK_GPIO27 BIT(27)
-#define INT_MASK_GPIO26 BIT(26)
-#define INT_MASK_GPIO25 BIT(25)
-#define INT_MASK_I2C BIT(12)
-#define INT_MASK_PWM BIT(11)
-#define INT_MASK_DMA1 BIT(10)
-#define INT_MASK_DMA BIT(9)
-#define INT_MASK_PCI BIT(8)
-#define INT_MASK_SSP1 BIT(7)
-#define INT_MASK_SSP0 BIT(6)
-#define INT_MASK_DE BIT(5)
-#define INT_MASK_ZVPORT1_VSYNC BIT(4)
-#define INT_MASK_ZVPORT0_VSYNC BIT(3)
-#define INT_MASK_CRT_VSYNC BIT(2)
-#define INT_MASK_PANEL_VSYNC BIT(1)
-#define INT_MASK_VGA_VSYNC BIT(0)
-
#define CURRENT_GATE 0x000040
#define CURRENT_GATE_MCLK_MASK (0x3 << 14)
#ifdef VALIDATION_CHIP
--
2.53.0
next prev parent reply other threads:[~2026-03-03 23:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-03 23:24 [PATCH 1/8] staging: sm750fb: remove unused GPIO_MUX bit field definitions Gabriel Windlin
2026-03-03 23:24 ` [PATCH 2/8] staging: sm750fb: remove unused CSC register definitions Gabriel Windlin
2026-03-03 23:24 ` [PATCH 3/8] staging: sm750fb: remove unused ZV capture " Gabriel Windlin
2026-03-03 23:24 ` [PATCH 4/8] staging: sm750fb: remove unused alpha and cursor " Gabriel Windlin
2026-03-03 23:24 ` [PATCH 5/8] staging: sm750fb: remove unused memory arbitration " Gabriel Windlin
2026-03-03 23:24 ` Gabriel Windlin [this message]
2026-03-03 23:24 ` [PATCH 7/8] staging: sm750fb: remove unused CURRENT_GATE, CRT_HWC, and DMA " Gabriel Windlin
2026-03-04 8:10 ` Dan Carpenter
2026-03-03 23:24 ` [PATCH 8/8] staging: sm750fb: remove unused GPIO bit field and interrupt definitions Gabriel Windlin
2026-03-09 16:39 ` [PATCH 1/8] staging: sm750fb: remove unused GPIO_MUX bit field definitions Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260303232434.1850583-6-gawindlin@gmail.com \
--to=gawindlin@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=sudipm.mukherjee@gmail.com \
--cc=teddy.wang@siliconmotion.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox