[PATCH v8 4/4] arm64: dts: freescale: moduline-display-av123z7m-n17: add backlight

[Maud Spierings via B4 Relay <devnull+maudspierings.gocontroll.com@kernel.org>]

From: Maud Spierings <maudspierings@gocontroll.com>

Add the missing backlight.

Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
---
 ...p-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
index 3eb665ce9d5d2..0b969c8c04db1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
@@ -16,6 +16,7 @@
 
 	panel {
 		compatible = "boe,av123z7m-n17";
+		backlight = <&backlight>;
 		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		pinctrl-0 = <&pinctrl_panel>;
 		pinctrl-names = "default";
@@ -91,10 +92,26 @@ lvds1_out: endpoint {
 		};
 	};
 
-	/* max25014 @ 0x6f */
+	backlight: backlight@6f {
+		compatible = "maxim,max25014";
+		reg = <0x6f>;
+		default-brightness = <50>;
+		enable-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		maxim,iset = <7>;
+		maxim,strings = <1 1 1 1>;
+	};
 };
 
 &iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
 	pinctrl_lvds_bridge: lvdsbridgegrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14

-- 
2.53.0