From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wr1-f46.google.com (mail-wr1-f46.google.com [209.85.221.46]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id DDA2F3112C0 for ; Sun, 17 May 2026 07:43:33 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.221.46 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1779003816; cv=none; b=AQteOh92eR4KLppUbr4yCP1lmKqMwM+TvgLqhC+HlxxDBbC4lNInN6EN7yiPPpwncGjwBuyvTFhYqw4kFjHsURQidp2sJNt4+/iHXh0vauXLW12S77PCBw/HdStoZUFQ7n+ByxT1IoX/c5Y/Qm4cHZPzZ+ofPlHVuXDqMLLcThs= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1779003816; c=relaxed/simple; bh=/lQ5p0ayr6Df3JRkR1L9VpuelhqYjdc8n9A686KbQ4Q=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=U6b/9I51cegOsAKdF9CyAPRuaDDXKsybMOpmczQQKPbexiOWZB9mEE5xoLEeTi7RDZ8oad4iiwXocLnhP46EazPl35E02+TiJ6MZ4vNe5YZnWvckxP1YSQPAIuSnOmaU9g92rofaf96YyA9Jv67nuQAuY1mu5jZdfWr67n5ZR3w= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=Q6r8JckQ; arc=none smtp.client-ip=209.85.221.46 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="Q6r8JckQ" Received: by mail-wr1-f46.google.com with SMTP id ffacd0b85a97d-4585a116a4aso929393f8f.3 for ; Sun, 17 May 2026 00:43:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1779003812; x=1779608612; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=XZKo5UvI/gJnxHMbxa9ycLb7RHsv/YC/zH6YHBOw+mM=; b=Q6r8JckQaZmzEcWMCW1IlDib5w/BSx9TX4M89boT3EoUKnz+b34wo4sgh8C/EBRjZw gzX4tjYBUZGS6WO6BOO/5K8dukMbKeb0F2bknhOmtRGTgGAWlhXm+6OPA+GH4MpHYNGZ Vg8gcOibNUiFIA6/R2EoO4YzzYULCrktERHtwe48re/j+LYhSncKtyTJWgH2PhpA3nNP mIvfV8M4AwPbeWq/TCwJoQoKwpghiJ1nl9JbBfuVUUYFzm+zkvXCBMmiuF633l8ZYoVZ gQHycrXNLKb4fOEWm7Jh36Q87CtR3tYWXExFa4WvlSd6bT3SOGKNh1SmZ/BvEEmyvpPA q/0w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1779003812; x=1779608612; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to; bh=XZKo5UvI/gJnxHMbxa9ycLb7RHsv/YC/zH6YHBOw+mM=; b=sm8/VvP+kPGZlSFtsOrv4sUdLv6oKC/ATy8InZad3XQJFAkzRpznBipVcDoFhNjyUk AOF9NnAy6feESAXLdEsLPdnTcO0pCSVv+r0jBgCwj8y7ge0p4iCQX104ITLp/sdn9Fkm WVez7MSSbw73l4t+9qa0Q6K4LT6daY2LANDiaSfZsDkgGTx9jWHojxqzAQ8/6dP2QDX6 ZKU6CcvFJcmYvE/9R9VzeMUgaf16HQGVeUTMyWIMB5D2zSKK/YXGiGZVK9pHyFvN9bhU RkFaFZElaCCE/Ygf+XHBHcjOKcLA9AmoqGPDs6e6ey2fRtAHibUx7KOlHwTxqlOHvmto AxEA== X-Forwarded-Encrypted: i=1; AFNElJ9zca9X8Hox8gm5HhIWmIu6Xj/BcHjPxxm89mrKBbG2NyqyUFWTQSN7ACE8EK/MStbUtF/upAVcsImtWg==@vger.kernel.org X-Gm-Message-State: AOJu0Yz2xfAjFBR6KajTFBBUArTssHpM1eKMNErwDUJUmdvZjfLgX+aN M97BglKeXCKW3rHaKxZIZt+rSDdLoeDphEVv/dyb5jAdI9mnK9qKtb1F X-Gm-Gg: Acq92OGHEubF8ooSx8N5OtBkNsOqr1/g283DxqojmUIxoLpIpWRNGm2GpV2dJZG9s3d eFWlq1661Y1HSgHx2kSGXQDpFs+zZho9WEsw6kfzMpOmlQNt/eKTVN0nAVttZHoND6j5ThcgGaT 8DHmLPAxEm/ABMOGUczZB58ppsHc3itUVfbUECMMRn+4yfZIO+IZdqVgt1a/HhetYIwtUDsKyLt AZiopWVYIbc+VzxBIXfqKdpK7d/Bw1Rj4ylfwo7vLKmwbTTxyNWKTox2rQ4Mwxz//CJpgbiLNqw Io/7w4ncQDW4Bofz8c+jTCVrTrujpKaF94fd0Pw7vGMsUcCsJbOoiU+3nWDIFa2F8vCyY2ohFy7 orelTSat5O3QRaeWttL6y8Mg1iYZE8N6CJ8NRdfqv4pbQ1rca2cIXsBcXNyJPWXlPtFxBKwnDUE 1RFZDmIbepwkf0 X-Received: by 2002:a05:6000:26c4:b0:43c:fc5c:aa0b with SMTP id ffacd0b85a97d-45e5c5e1da2mr15644370f8f.42.1779003811985; Sun, 17 May 2026 00:43:31 -0700 (PDT) Received: from xeon ([188.163.112.61]) by smtp.gmail.com with ESMTPSA id ffacd0b85a97d-45da0fe248dsm27512864f8f.30.2026.05.17.00.43.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 17 May 2026 00:43:31 -0700 (PDT) From: Svyatoslav Ryhel To: Lee Jones , Daniel Thompson , Jingoo Han , Pavel Machek , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jonathan Cameron , David Lechner , =?UTF-8?q?Nuno=20S=C3=A1?= , Andy Shevchenko , Helge Deller , Svyatoslav Ryhel Cc: dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, linux-fbdev@vger.kernel.org Subject: [PATCH v1 1/6] dt-bindings: leds: Document TI LM3533 LED controller Date: Sun, 17 May 2026 10:43:01 +0300 Message-ID: <20260517074306.30937-2-clamor95@gmail.com> X-Mailer: git-send-email 2.51.0 In-Reply-To: <20260517074306.30937-1-clamor95@gmail.com> References: <20260517074306.30937-1-clamor95@gmail.com> Precedence: bulk X-Mailing-List: linux-fbdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Document the LM3533 - a complete power source for backlight, keypad and indicator LEDs in smartphone handsets. The high-voltage inductive boost converter provides the power for two series LED strings display backlight and keypad functions. Signed-off-by: Svyatoslav Ryhel --- .../leds/backlight/ti,lm3533-backlight.yaml | 68 +++++++ .../bindings/leds/ti,lm3533-leds.yaml | 66 ++++++ .../devicetree/bindings/leds/ti,lm3533.yaml | 190 ++++++++++++++++++ 3 files changed, 324 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3533.yaml diff --git a/Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml new file mode 100644 index 000000000000..866b0fb8ed04 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/ti,lm3533-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LM3533 high voltage series LED strings + +description: + This is part of the TI LM3533 MFD device. It represents two high voltage series + LED strings for display backlight controlled by the TI LM3533. + +maintainers: + - Svyatoslav Ryhel + +allOf: + - $ref: /schemas/leds/backlight/common.yaml# + +properties: + compatible: + const: ti,lm3533-backlight + + reg: + description: Control bank selection (0 = bank A, 1 = bank B). + maximum: 1 + + led-max-microamp: + description: maximum current in uA with a 800 uA step. + minimum: 5000 + maximum: 29800 + default: 5000 + + led-sources: + description: | + HVLED strings associated with this control bank: + 0 - HVLED1 + 1 - HVLED2 + minItems: 1 + maxItems: 2 + items: + maximum: 1 + + ti,pwm-config-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Control Bank PWM Configuration Register mask that allows to configure + PWM input in Zones 0-4 + BIT(0) - PWM Input is enabled + BIT(1) - PWM Input is enabled in Zone 0 + BIT(2) - PWM Input is enabled in Zone 1 + BIT(3) - PWM Input is enabled in Zone 2 + BIT(4) - PWM Input is enabled in Zone 3 + BIT(5) - PWM Input is enabled in Zone 4 + + ti,linear-mapping-mode: + description: + Enable linear mapping mode. If disabled, then it will use exponential + mapping mode in which the ramp up/down appears to have a more uniform + transition to the human eye. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +# see ti,lm3533.yaml for an example diff --git a/Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml b/Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml new file mode 100644 index 000000000000..a582d7d2f955 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/ti,lm3533-leds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LM3533 low voltage control banks for individual LEDs + +description: + This is part of the TI LM3533 MFD device. It represents four low voltage + control banks for individual LEDs provided by the TI LM3533. + +maintainers: + - Svyatoslav Ryhel + +allOf: + - $ref: /schemas/leds/common.yaml# + +properties: + compatible: + const: ti,lm3533-leds + + reg: + description: + Control bank selection (2 = bank C, 3 = bank D, 4 = bank E, 5 = bank F). + minimum: 2 + maximum: 5 + + led-max-microamp: + description: maximum current in uA with a 800 uA step. + minimum: 5000 + maximum: 29800 + default: 5000 + + led-sources: + description: | + LVLED associated with this control bank. May be more than 1 source per bank. + 0 - LVLED1 + 1 - LVLED2 + 2 - LVLED3 + 3 - LVLED4 + 4 - LVLED5 + minItems: 1 + maxItems: 5 + items: + maximum: 5 + + ti,pwm-config-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Control Bank PWM Configuration Register mask that allows to configure + PWM input in Zones 0-4 + BIT(0) - PWM Input is enabled + BIT(1) - PWM Input is enabled in Zone 0 + BIT(2) - PWM Input is enabled in Zone 1 + BIT(3) - PWM Input is enabled in Zone 2 + BIT(4) - PWM Input is enabled in Zone 3 + BIT(5) - PWM Input is enabled in Zone 4 + +required: + - compatible + - reg + +unevaluatedProperties: false + +# see ti,lm3533.yaml for an example diff --git a/Documentation/devicetree/bindings/leds/ti,lm3533.yaml b/Documentation/devicetree/bindings/leds/ti,lm3533.yaml new file mode 100644 index 000000000000..2e200f172400 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/ti,lm3533.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/ti,lm3533.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LM3533 Complete Lighting Power Solution + +description: > + The LM3533 is a complete power source for backlight, keypad, and indicator LEDs + in smartphone handsets. The high-voltage inductive boost converter provides the + power for two high voltage series LED strings for display backlight and four low + voltage control banks for individual LEDs. Additionally, LM3533 features an ALS + sensor support. + + https://www.ti.com/product/LM3533 + +maintainers: + - Svyatoslav Ryhel + +properties: + compatible: + const: ti,lm3533 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO connected to the HWEN pin. + maxItems: 1 + + vin-supply: + description: Supply connected to the IN line (2.7 V to 5.5 V). + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + ti,boost-ovp-microvolt: + description: boost OVP select (16V, 24V, 32V, 40V) + enum: [ 16000000, 24000000, 32000000, 40000000 ] + default: 16000000 + + ti,boost-freq-hz: + description: boost frequency select (500KHz or 1MHz) + enum: [ 500000, 1000000 ] + default: 500000 + + light-sensor: + type: object + additionalProperties: false + + properties: + compatible: + const: ti,lm3533-als + + interrupts: + maxItems: 1 + + ti,resistor-ohm: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Internal configuration resister value when ALS is in Analog Sensor + mode and PWM mode is disabled. + minimum: 1575 + maximum: 200000 + + ti,pwm-mode: + type: boolean + description: + Switch for mode in which ALS is running. If this property is set + then ALS is running in PWM mode, internal resistor value is set to + high-impedance (0) and ti,resistor-ohm property is ignored. + + required: + - compatible + + anyOf: + - required: + - ti,resistor-ohm + - required: + - ti,pwm-mode + +patternProperties: + "^backlight@[01]$": + $ref: /schemas/leds/backlight/ti,lm3533-backlight.yaml# + + "^led@[2-5]$": + $ref: /schemas/leds/ti,lm3533-leds.yaml# + +required: + - compatible + - reg + - light-sensor + - backlight@0 + - backlight@1 + - led@2 + - led@3 + - led@4 + - led@5 + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@36 { + compatible = "ti,lm3533"; + reg = <0x36>; + + enable-gpios = <&gpio 110 GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_3v3_bat>; + + ti,boost-ovp-microvolt = <24000000>; + ti,boost-freq-hz = <500000>; + + #address-cells = <1>; + #size-cells = <0>; + + backlight@0 { + compatible = "ti,lm3533-backlight"; + reg = <0>; + + default-brightness = <113>; + + led-max-microamp = <23400>; + led-sources = <0>; + }; + + backlight@1 { + compatible = "ti,lm3533-backlight"; + reg = <1>; + + default-brightness = <113>; + + led-max-microamp = <23400>; + led-sources = <1>; + }; + + led@2 { + compatible = "ti,lm3533-leds"; + reg = <2>; + + led-max-microamp = <23400>; + led-sources = <0>; + }; + + led@3 { + compatible = "ti,lm3533-leds"; + reg = <3>; + + led-max-microamp = <23400>; + led-sources = <1>; + }; + + led@4 { + compatible = "ti,lm3533-leds"; + reg = <4>; + + led-max-microamp = <23400>; + led-sources = <2>; + }; + + led@5 { + compatible = "ti,lm3533-leds"; + reg = <5>; + + led-max-microamp = <23400>; + led-sources = <3 4>; + }; + + light-sensor { + compatible = "ti,lm3533-als"; + + interrupt-parent = <&gpio>; + interrupts = <80 IRQ_TYPE_LEVEL_LOW>; + + ti,pwm-mode; + }; + }; + }; +... -- 2.51.0