[PATCH v3 00/11] mfd: lm3533: convert to OF bindings, improve support

[Svyatoslav Ryhel <clamor95@gmail.com>]

Convert LM3533 to OF bindings, add missing VIN supply, add support for
setting mapping mode and LED sources based on device tree. 

---
Changes in v2:

schema
- maximum led sources for leds set to 4
- anyOf > oneOf in ALS
- improved ALS descriptions
- adjusted example
drivers
- dropped devm convertion of irq and mfd helpers
- all als configuration moved into lm3533_als_setup
- added regulator/consumer.h
- lm3533_bl_setup set before sysfs_create_group in backlight
- added check if LVLED is valid
- LM3533_REG_OUTPUT_CONF1 > LM3533_REG_OUTPUT_CONF2 for LVLED4 and LVLED5

Changes in v3:

- ohm -> ohms
- added default PWM mask to schema
- added commit removing driver regmap wrappers
- added commits which flatten pdata helpers
- adjusted check if als->irq > 0 since als->irq can be negative if error/missing
- added count for children defined in device tree and mfd_cell is allocated
  via devm_kcalloc to be able to contain all of them
- fixed backlight boundary check
- fixed count increased unconditionally
- dev_err returns node name instead of reg value
- LM3533_MAX_CURRENT_* defines moved to common header since they are used to clamp
  current values read from the tree
- mapping mode commit splitted into 2 (sysfs logic improvement > mode from DT)
- backlight mode configuration set before sysfs group is created
- fixed LVLED check on LEDs setup
- added check if HVLED is valid
- fixed wrong err_sysfs_remove goto in lm3533_bl
- added commit implementing backlight_scale property
---

Svyatoslav Ryhel (11):
  dt-bindings: leds: Document TI LM3533 LED controller
  mfd: lm3533: Remove driver specific regmap wrappers
  iio: light: lm3533-als: Remove redundant pdata helpers
  mfd: lm3533-core: Remove redundant pdata helpers
  mfd: lm3533: Convert to use OF bindings
  mfd: lm3533: Add support for VIN power supply
  mfd: lm3533: Set DMA mask
  video: backlight: lm3533_bl: Improve linear sysfs logic
  video: backlight: lm3533_bl: Set initial mapping mode from DT
  video: backlight: lm3533_bl: Implement backlight_scale property
  video: leds: backlight: lm3533: Support getting LED sources from DT

 .../leds/backlight/ti,lm3533-backlight.yaml   |  69 ++++
 .../bindings/leds/ti,lm3533-leds.yaml         |  67 ++++
 .../devicetree/bindings/leds/ti,lm3533.yaml   | 169 ++++++++
 drivers/iio/light/lm3533-als.c                | 159 ++++----
 drivers/leds/leds-lm3533.c                    | 142 +++++--
 drivers/mfd/lm3533-core.c                     | 361 +++++++-----------
 drivers/mfd/lm3533-ctrlbank.c                 |  27 +-
 drivers/video/backlight/lm3533_bl.c           | 153 ++++++--
 include/linux/mfd/lm3533.h                    |  62 +--
 9 files changed, 758 insertions(+), 451 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3533.yaml

-- 
2.51.0