From: Svyatoslav Ryhel <clamor95@gmail.com>
To: "Lee Jones" <lee@kernel.org>,
"Daniel Thompson" <danielt@kernel.org>,
"Jingoo Han" <jingoohan1@gmail.com>,
"Pavel Machek" <pavel@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Helge Deller" <deller@gmx.de>,
"Svyatoslav Ryhel" <clamor95@gmail.com>
Cc: Johan Hovold <johan@kernel.org>,
dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-iio@vger.kernel.org, linux-fbdev@vger.kernel.org
Subject: [PATCH v4 08/14] mfd: lm3533: Convert to use OF bindings
Date: Sat, 6 Jun 2026 07:57:32 +0300 [thread overview]
Message-ID: <20260606045738.21050-9-clamor95@gmail.com> (raw)
In-Reply-To: <20260606045738.21050-1-clamor95@gmail.com>
Since there are no users of this driver via platform data, remove the
platform data support and switch to using Device Tree bindings.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org> #for backlight
---
drivers/iio/light/lm3533-als.c | 67 +++++---
drivers/leds/leds-lm3533.c | 51 ++++--
drivers/mfd/lm3533-core.c | 236 ++++++++++++----------------
drivers/mfd/lm3533-ctrlbank.c | 5 -
drivers/video/backlight/lm3533_bl.c | 59 ++++---
include/linux/mfd/lm3533.h | 52 +-----
6 files changed, 225 insertions(+), 245 deletions(-)
diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index c4035d1c8d57..d51cf96970b9 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -16,16 +16,19 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/mfd/core.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
+#include <linux/units.h>
#include <linux/mfd/lm3533.h>
-#define LM3533_ALS_RESISTOR_MIN 1
-#define LM3533_ALS_RESISTOR_MAX 127
+#define LM3533_ALS_RESISTOR_MIN_OHMS 1575
+#define LM3533_ALS_RESISTOR_MAX_OHMS 200000
#define LM3533_ALS_CHANNEL_CURRENT_MAX 2
#define LM3533_ALS_THRESH_MAX 3
#define LM3533_ALS_ZONE_MAX 4
@@ -57,6 +60,9 @@ struct lm3533_als {
atomic_t zone;
struct mutex thresh_mutex;
+
+ u32 r_select;
+ bool pwm_mode;
};
@@ -403,7 +409,7 @@ static ssize_t show_thresh_either_en(struct device *dev,
int enable;
int ret;
- if (als->irq) {
+ if (als->irq > 0) {
ret = lm3533_als_get_int_mode(indio_dev, &enable);
if (ret)
return ret;
@@ -425,7 +431,7 @@ static ssize_t store_thresh_either_en(struct device *dev,
u8 zone;
int ret;
- if (!als->irq)
+ if (als->irq <= 0)
return -EBUSY;
if (kstrtoul(buf, 0, &enable))
@@ -708,27 +714,36 @@ static const struct attribute_group lm3533_als_attribute_group = {
.attrs = lm3533_als_attributes
};
-static int lm3533_als_setup(struct lm3533_als *als,
- const struct lm3533_als_platform_data *pdata)
+static int lm3533_als_setup(struct lm3533_als *als)
{
struct device *dev = &als->pdev->dev;
int ret;
+ als->pwm_mode = device_property_read_bool(dev, "ti,pwm-mode");
+
ret = regmap_assign_bits(als->regmap, LM3533_REG_ALS_CONF,
- LM3533_ALS_INPUT_MODE_MASK, pdata->pwm_mode);
+ LM3533_ALS_INPUT_MODE_MASK, als->pwm_mode);
if (ret)
return dev_err_probe(dev, ret, "failed to set input mode %d\n",
- pdata->pwm_mode);
+ als->pwm_mode);
/* ALS input is always high impedance in PWM-mode. */
- if (!pdata->pwm_mode) {
- if (pdata->r_select < LM3533_ALS_RESISTOR_MIN ||
- pdata->r_select > LM3533_ALS_RESISTOR_MAX)
+ if (!als->pwm_mode) {
+ ret = device_property_read_u32(dev, "ti,resistor-ohms",
+ &als->r_select);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to ger resistor value\n");
+
+ if (als->r_select < LM3533_ALS_RESISTOR_MIN_OHMS ||
+ als->r_select > LM3533_ALS_RESISTOR_MAX_OHMS)
return dev_err_probe(dev, -EINVAL,
"invalid resistor value\n");
+ als->r_select = DIV_ROUND_UP(2 * MICRO, 10 * als->r_select);
+
ret = regmap_write(als->regmap, LM3533_REG_ALS_RESISTOR_SELECT,
- pdata->r_select);
+ als->r_select);
if (ret)
return dev_err_probe(dev, ret, "failed to set resistor\n");
}
@@ -792,7 +807,6 @@ static const struct iio_info lm3533_als_info = {
static int lm3533_als_probe(struct platform_device *pdev)
{
- const struct lm3533_als_platform_data *pdata;
struct lm3533 *lm3533;
struct lm3533_als *als;
struct iio_dev *indio_dev;
@@ -802,12 +816,6 @@ static int lm3533_als_probe(struct platform_device *pdev)
if (!lm3533)
return -EINVAL;
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data\n");
- return -EINVAL;
- }
-
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*als));
if (!indio_dev)
return -ENOMEM;
@@ -816,25 +824,27 @@ static int lm3533_als_probe(struct platform_device *pdev)
indio_dev->channels = lm3533_als_channels;
indio_dev->num_channels = ARRAY_SIZE(lm3533_als_channels);
indio_dev->name = dev_name(&pdev->dev);
- iio_device_set_parent(indio_dev, pdev->dev.parent);
indio_dev->modes = INDIO_DIRECT_MODE;
als = iio_priv(indio_dev);
als->regmap = lm3533->regmap;
als->pdev = pdev;
- als->irq = lm3533->irq;
+ als->irq = platform_get_irq_optional(pdev, 0);
+ if (als->irq == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
atomic_set(&als->zone, 0);
mutex_init(&als->thresh_mutex);
platform_set_drvdata(pdev, indio_dev);
- if (als->irq) {
+ if (als->irq > 0) {
ret = lm3533_als_setup_irq(als, indio_dev);
if (ret)
return ret;
}
- ret = lm3533_als_setup(als, pdata);
+ ret = lm3533_als_setup(als);
if (ret)
goto err_free_irq;
@@ -853,7 +863,7 @@ static int lm3533_als_probe(struct platform_device *pdev)
err_disable:
lm3533_als_disable(als);
err_free_irq:
- if (als->irq)
+ if (als->irq > 0)
free_irq(als->irq, indio_dev);
return ret;
@@ -867,13 +877,20 @@ static void lm3533_als_remove(struct platform_device *pdev)
lm3533_als_set_int_mode(indio_dev, false);
iio_device_unregister(indio_dev);
lm3533_als_disable(als);
- if (als->irq)
+ if (als->irq > 0)
free_irq(als->irq, indio_dev);
}
+static const struct of_device_id lm3533_als_match_table[] = {
+ { .compatible = "ti,lm3533-als" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lm3533_als_match_table);
+
static struct platform_driver lm3533_als_driver = {
.driver = {
.name = "lm3533-als",
+ .of_match_table = lm3533_als_match_table,
},
.probe = lm3533_als_probe,
.remove = lm3533_als_remove,
diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c
index f57d97201816..a661aedcdc60 100644
--- a/drivers/leds/leds-lm3533.c
+++ b/drivers/leds/leds-lm3533.c
@@ -10,8 +10,10 @@
#include <linux/module.h>
#include <linux/leds.h>
#include <linux/mfd/core.h>
+#include <linux/mod_devicetable.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -50,6 +52,9 @@ struct lm3533_led {
struct mutex mutex;
unsigned long flags;
+ u32 max_current;
+ u32 pwm;
+
bool have_als;
};
@@ -616,22 +621,20 @@ static const struct attribute_group *lm3533_led_attribute_groups[] = {
NULL
};
-static int lm3533_led_setup(struct lm3533_led *led,
- struct lm3533_led_platform_data *pdata)
+static int lm3533_led_setup(struct lm3533_led *led)
{
int ret;
- ret = lm3533_ctrlbank_set_max_current(&led->cb, pdata->max_current);
+ ret = lm3533_ctrlbank_set_max_current(&led->cb, led->max_current);
if (ret)
return ret;
- return lm3533_ctrlbank_set_pwm(&led->cb, pdata->pwm);
+ return lm3533_ctrlbank_set_pwm(&led->cb, led->pwm);
}
static int lm3533_led_probe(struct platform_device *pdev)
{
struct lm3533 *lm3533;
- struct lm3533_led_platform_data *pdata;
struct lm3533_led *led;
int ret;
@@ -641,12 +644,6 @@ static int lm3533_led_probe(struct platform_device *pdev)
if (!lm3533)
return -EINVAL;
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data\n");
- return -EINVAL;
- }
-
if (pdev->id < 0 || pdev->id >= LM3533_LVCTRLBANK_COUNT) {
dev_err(&pdev->dev, "illegal LED id %d\n", pdev->id);
return -EINVAL;
@@ -659,8 +656,6 @@ static int lm3533_led_probe(struct platform_device *pdev)
led->regmap = lm3533->regmap;
led->have_als = lm3533->have_als;
- led->cdev.name = pdata->name;
- led->cdev.default_trigger = pdata->default_trigger;
led->cdev.brightness_set_blocking = lm3533_led_set;
led->cdev.brightness_get = lm3533_led_get;
led->cdev.blink_set = lm3533_led_blink_set;
@@ -668,6 +663,15 @@ static int lm3533_led_probe(struct platform_device *pdev)
led->cdev.groups = lm3533_led_attribute_groups;
led->id = pdev->id;
+ led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-%d",
+ pdev->name, led->id);
+ if (!led->cdev.name)
+ return -ENOMEM;
+
+ led->cdev.default_trigger = "none";
+ device_property_read_string(&pdev->dev, "linux,default-trigger",
+ &led->cdev.default_trigger);
+
mutex_init(&led->mutex);
/* The class framework makes a callback to get brightness during
@@ -680,15 +684,23 @@ static int lm3533_led_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, led);
- ret = led_classdev_register(pdev->dev.parent, &led->cdev);
+ ret = led_classdev_register(&pdev->dev, &led->cdev);
if (ret) {
- dev_err(&pdev->dev, "failed to register LED %d\n", pdev->id);
+ dev_err(&pdev->dev, "failed to register LED %d\n", led->id);
return ret;
}
led->cb.dev = led->cdev.dev;
- ret = lm3533_led_setup(led, pdata);
+ device_property_read_u32(&pdev->dev, "led-max-microamp",
+ &led->max_current);
+ led->max_current = clamp(led->max_current, LM3533_MAX_CURRENT_MIN,
+ LM3533_MAX_CURRENT_MAX);
+
+ led->pwm = 0;
+ device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &led->pwm);
+
+ ret = lm3533_led_setup(led);
if (ret)
goto err_deregister;
@@ -725,9 +737,16 @@ static void lm3533_led_shutdown(struct platform_device *pdev)
lm3533_led_set(&led->cdev, LED_OFF); /* disable blink */
}
+static const struct of_device_id lm3533_led_match_table[] = {
+ { .compatible = "ti,lm3533-leds" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lm3533_led_match_table);
+
static struct platform_driver lm3533_led_driver = {
.driver = {
.name = "lm3533-leds",
+ .of_match_table = lm3533_led_match_table,
},
.probe = lm3533_led_probe,
.remove = lm3533_led_remove,
diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index e3efc9f6f348..5af1d5476d3e 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -14,19 +14,26 @@
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/mfd/core.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
+#include <linux/units.h>
#include <linux/mfd/lm3533.h>
#define LM3533_BOOST_OVP_MASK 0x06
#define LM3533_BOOST_OVP_SHIFT 1
+#define LM3533_BOOST_OVP_MIN (16 * MICRO)
+#define LM3533_BOOST_OVP_MAX (40 * MICRO)
#define LM3533_BOOST_FREQ_MASK 0x01
#define LM3533_BOOST_FREQ_SHIFT 0
+#define LM3533_BOOST_FREQ_MIN (500 * HZ_PER_KHZ)
+#define LM3533_BOOST_FREQ_MAX (1000 * HZ_PER_KHZ)
#define LM3533_BL_ID_MASK 1
#define LM3533_LED_ID_MASK 3
@@ -35,6 +42,7 @@
#define LM3533_HVLED_ID_MAX 2
#define LM3533_LVLED_ID_MAX 5
+#define LM3533_CELLS_MAX 7
#define LM3533_REG_OUTPUT_CONF1 0x10
#define LM3533_REG_OUTPUT_CONF2 0x11
@@ -42,44 +50,6 @@
#define LM3533_REG_MAX 0xb2
-
-static struct mfd_cell lm3533_als_devs[] = {
- {
- .name = "lm3533-als",
- .id = -1,
- },
-};
-
-static struct mfd_cell lm3533_bl_devs[] = {
- {
- .name = "lm3533-backlight",
- .id = 0,
- },
- {
- .name = "lm3533-backlight",
- .id = 1,
- },
-};
-
-static struct mfd_cell lm3533_led_devs[] = {
- {
- .name = "lm3533-leds",
- .id = 0,
- },
- {
- .name = "lm3533-leds",
- .id = 1,
- },
- {
- .name = "lm3533-leds",
- .id = 2,
- },
- {
- .name = "lm3533-leds",
- .id = 3,
- },
-};
-
/*
* HVLED output config -- output hvled controlled by backlight bl
*/
@@ -296,129 +266,99 @@ static struct attribute_group lm3533_attribute_group = {
.attrs = lm3533_attributes
};
-static int lm3533_device_als_init(struct lm3533 *lm3533)
-{
- struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
- int ret;
-
- if (!pdata->als)
- return 0;
-
- lm3533_als_devs[0].platform_data = pdata->als;
- lm3533_als_devs[0].pdata_size = sizeof(*pdata->als);
-
- ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL,
- 0, NULL);
- if (ret) {
- dev_err(lm3533->dev, "failed to add ALS device\n");
- return ret;
- }
-
- lm3533->have_als = 1;
-
- return 0;
-}
-
-static int lm3533_device_bl_init(struct lm3533 *lm3533)
-{
- struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
- int i;
- int ret;
-
- if (!pdata->backlights || pdata->num_backlights == 0)
- return 0;
-
- if (pdata->num_backlights > ARRAY_SIZE(lm3533_bl_devs))
- pdata->num_backlights = ARRAY_SIZE(lm3533_bl_devs);
-
- for (i = 0; i < pdata->num_backlights; ++i) {
- lm3533_bl_devs[i].platform_data = &pdata->backlights[i];
- lm3533_bl_devs[i].pdata_size = sizeof(pdata->backlights[i]);
- }
-
- ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs,
- pdata->num_backlights, NULL, 0, NULL);
- if (ret) {
- dev_err(lm3533->dev, "failed to add backlight devices\n");
- return ret;
- }
-
- lm3533->have_backlights = 1;
-
- return 0;
-}
-
-static int lm3533_device_led_init(struct lm3533 *lm3533)
+static int lm3533_device_init(struct lm3533 *lm3533)
{
- struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
- int i;
+ struct device *dev = lm3533->dev;
+ struct mfd_cell *lm3533_devices;
+ u32 count = 0, reg, nchilds;
int ret;
- if (!pdata->leds || pdata->num_leds == 0)
- return 0;
-
- if (pdata->num_leds > ARRAY_SIZE(lm3533_led_devs))
- pdata->num_leds = ARRAY_SIZE(lm3533_led_devs);
+ nchilds = device_get_child_node_count(dev);
+ if (!nchilds || nchilds > LM3533_CELLS_MAX)
+ return dev_err_probe(dev, -ENODEV,
+ "num of child nodes is not supported\n");
- for (i = 0; i < pdata->num_leds; ++i) {
- lm3533_led_devs[i].platform_data = &pdata->leds[i];
- lm3533_led_devs[i].pdata_size = sizeof(pdata->leds[i]);
- }
-
- ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs,
- pdata->num_leds, NULL, 0, NULL);
- if (ret) {
- dev_err(lm3533->dev, "failed to add LED devices\n");
- return ret;
- }
+ lm3533_devices = devm_kcalloc(dev, nchilds, sizeof(*lm3533_devices),
+ GFP_KERNEL);
+ if (!lm3533_devices)
+ return -ENOMEM;
- lm3533->have_leds = 1;
+ device_for_each_child_node_scoped(dev, child) {
+ if (count >= nchilds)
+ break;
- return 0;
-}
+ if (fwnode_device_is_compatible(child, "ti,lm3533-als")) {
+ lm3533_devices[count].name = "lm3533-als";
+ lm3533_devices[count].of_compatible = "ti,lm3533-als";
+ lm3533_devices[count].id = PLATFORM_DEVID_NONE;
-static int lm3533_device_init(struct lm3533 *lm3533)
-{
- struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
- int ret;
+ lm3533->have_als = true;
+ count++;
+ }
- dev_dbg(lm3533->dev, "%s\n", __func__);
+ if (fwnode_device_is_compatible(child, "ti,lm3533-backlight")) {
+ ret = fwnode_property_read_u32(child, "reg", ®);
+ if (ret || reg >= LM3533_HVLED_ID_MAX) {
+ dev_err(dev, "invalid backlight node %pfw\n", child);
+ continue;
+ }
+
+ lm3533_devices[count].name = "lm3533-backlight";
+ lm3533_devices[count].of_compatible = "ti,lm3533-backlight";
+ lm3533_devices[count].id = reg;
+ lm3533_devices[count].of_reg = reg;
+ lm3533_devices[count].use_of_reg = true;
+
+ lm3533->have_backlights = true;
+ count++;
+ }
- if (!pdata) {
- dev_err(lm3533->dev, "no platform data\n");
- return -EINVAL;
+ if (fwnode_device_is_compatible(child, "ti,lm3533-leds")) {
+ ret = fwnode_property_read_u32(child, "reg", ®);
+ if (ret || reg < LM3533_HVLED_ID_MAX ||
+ reg > LM3533_LVLED_ID_MAX) {
+ dev_err(dev, "invalid LED node %pfw\n", child);
+ continue;
+ }
+
+ lm3533_devices[count].name = "lm3533-leds";
+ lm3533_devices[count].of_compatible = "ti,lm3533-leds";
+ lm3533_devices[count].id = reg - LM3533_HVLED_ID_MAX;
+ lm3533_devices[count].of_reg = reg;
+ lm3533_devices[count].use_of_reg = true;
+
+ lm3533->have_leds = true;
+ count++;
+ }
}
- lm3533->hwen = devm_gpiod_get(lm3533->dev, NULL, GPIOD_OUT_LOW);
- if (IS_ERR(lm3533->hwen))
- return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen), "failed to request HWEN GPIO\n");
- gpiod_set_consumer_name(lm3533->hwen, "lm3533-hwen");
-
lm3533_enable(lm3533);
ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
LM3533_BOOST_FREQ_MASK,
- pdata->boost_freq << LM3533_BOOST_FREQ_SHIFT);
+ lm3533->boost_freq << LM3533_BOOST_FREQ_SHIFT);
if (ret) {
- dev_err(lm3533->dev, "failed to set boost frequency\n");
+ dev_err(dev, "failed to set boost frequency\n");
goto err_disable;
}
ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
LM3533_BOOST_OVP_MASK,
- pdata->boost_ovp << LM3533_BOOST_OVP_SHIFT);
+ lm3533->boost_ovp << LM3533_BOOST_OVP_SHIFT);
if (ret) {
- dev_err(lm3533->dev, "failed to set boost ovp\n");
+ dev_err(dev, "failed to set boost ovp\n");
goto err_disable;
}
- lm3533_device_als_init(lm3533);
- lm3533_device_bl_init(lm3533);
- lm3533_device_led_init(lm3533);
+ ret = mfd_add_devices(dev, 0, lm3533_devices, count, NULL, 0, NULL);
+ if (ret) {
+ dev_err(dev, "failed to add MFD devices: %d\n", ret);
+ goto err_disable;
+ }
- ret = device_add_group(lm3533->dev, &lm3533_attribute_group);
+ ret = device_add_group(dev, &lm3533_attribute_group);
if (ret < 0) {
- dev_err(lm3533->dev, "failed to create sysfs attributes\n");
+ dev_err(dev, "failed to create sysfs attributes\n");
goto err_unregister;
}
@@ -509,7 +449,26 @@ static int lm3533_i2c_probe(struct i2c_client *i2c)
return PTR_ERR(lm3533->regmap);
lm3533->dev = &i2c->dev;
- lm3533->irq = i2c->irq;
+
+ lm3533->hwen = devm_gpiod_get_optional(lm3533->dev, "enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(lm3533->hwen))
+ return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen),
+ "failed to get HWEN GPIO\n");
+
+ device_property_read_u32(lm3533->dev, "ti,boost-ovp-microvolt",
+ &lm3533->boost_ovp);
+
+ lm3533->boost_ovp = clamp(lm3533->boost_ovp, LM3533_BOOST_OVP_MIN,
+ LM3533_BOOST_OVP_MAX);
+ lm3533->boost_ovp = lm3533->boost_ovp / (8 * MICRO) - 2;
+
+ device_property_read_u32(lm3533->dev, "ti,boost-freq-hz",
+ &lm3533->boost_freq);
+
+ lm3533->boost_freq = clamp(lm3533->boost_freq, LM3533_BOOST_FREQ_MIN,
+ LM3533_BOOST_FREQ_MAX);
+ lm3533->boost_freq = lm3533->boost_freq / (500 * KILO) - 1;
return lm3533_device_init(lm3533);
}
@@ -523,6 +482,12 @@ static void lm3533_i2c_remove(struct i2c_client *i2c)
lm3533_device_exit(lm3533);
}
+static const struct of_device_id lm3533_match_table[] = {
+ { .compatible = "ti,lm3533" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lm3533_match_table);
+
static const struct i2c_device_id lm3533_i2c_ids[] = {
{ "lm3533" },
{ }
@@ -532,6 +497,7 @@ MODULE_DEVICE_TABLE(i2c, lm3533_i2c_ids);
static struct i2c_driver lm3533_i2c_driver = {
.driver = {
.name = "lm3533",
+ .of_match_table = lm3533_match_table,
},
.id_table = lm3533_i2c_ids,
.probe = lm3533_i2c_probe,
diff --git a/drivers/mfd/lm3533-ctrlbank.c b/drivers/mfd/lm3533-ctrlbank.c
index 07aec46e8c0a..0454b4bd2da2 100644
--- a/drivers/mfd/lm3533-ctrlbank.c
+++ b/drivers/mfd/lm3533-ctrlbank.c
@@ -13,11 +13,6 @@
#include <linux/mfd/lm3533.h>
-
-#define LM3533_MAX_CURRENT_MIN 5000
-#define LM3533_MAX_CURRENT_MAX 29800
-#define LM3533_MAX_CURRENT_STEP 800
-
#define LM3533_PWM_MAX 0x3f
#define LM3533_REG_PWM_BASE 0x14
diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index b4363a30b2c8..e91c598342ad 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -9,7 +9,9 @@
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/backlight.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -29,6 +31,9 @@ struct lm3533_bl {
struct backlight_device *bd;
int id;
+ u32 max_current;
+ u32 pwm;
+
bool have_als;
};
@@ -237,25 +242,25 @@ static struct attribute_group lm3533_bl_attribute_group = {
.attrs = lm3533_bl_attributes
};
-static int lm3533_bl_setup(struct lm3533_bl *bl,
- struct lm3533_bl_platform_data *pdata)
+static int lm3533_bl_setup(struct lm3533_bl *bl)
{
int ret;
- ret = lm3533_ctrlbank_set_max_current(&bl->cb, pdata->max_current);
+ ret = lm3533_ctrlbank_set_max_current(&bl->cb, bl->max_current);
if (ret)
return ret;
- return lm3533_ctrlbank_set_pwm(&bl->cb, pdata->pwm);
+ return lm3533_ctrlbank_set_pwm(&bl->cb, bl->pwm);
}
static int lm3533_bl_probe(struct platform_device *pdev)
{
struct lm3533 *lm3533;
- struct lm3533_bl_platform_data *pdata;
struct lm3533_bl *bl;
struct backlight_device *bd;
struct backlight_properties props;
+ char *name = NULL;
+ u32 default_brightness = LM3533_BL_MAX_BRIGHTNESS;
int ret;
dev_dbg(&pdev->dev, "%s\n", __func__);
@@ -264,12 +269,6 @@ static int lm3533_bl_probe(struct platform_device *pdev)
if (!lm3533)
return -EINVAL;
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data\n");
- return -EINVAL;
- }
-
if (pdev->id < 0 || pdev->id >= LM3533_HVCTRLBANK_COUNT) {
dev_err(&pdev->dev, "illegal backlight id %d\n", pdev->id);
return -EINVAL;
@@ -287,13 +286,21 @@ static int lm3533_bl_probe(struct platform_device *pdev)
bl->cb.id = lm3533_bl_get_ctrlbank_id(bl);
bl->cb.dev = NULL; /* until registered */
+ name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-%d",
+ pdev->name, pdev->id);
+ if (!name)
+ return -ENOMEM;
+
+ device_property_read_u32(&pdev->dev, "default-brightness",
+ &default_brightness);
+
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_RAW;
props.max_brightness = LM3533_BL_MAX_BRIGHTNESS;
- props.brightness = pdata->default_brightness;
- bd = devm_backlight_device_register(&pdev->dev, pdata->name,
- pdev->dev.parent, bl, &lm3533_bl_ops,
- &props);
+ props.brightness = default_brightness;
+
+ bd = devm_backlight_device_register(&pdev->dev, name, &pdev->dev,
+ bl, &lm3533_bl_ops, &props);
if (IS_ERR(bd)) {
dev_err(&pdev->dev, "failed to register backlight device\n");
return PTR_ERR(bd);
@@ -304,6 +311,17 @@ static int lm3533_bl_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, bl);
+ device_property_read_u32(&pdev->dev, "led-max-microamp",
+ &bl->max_current);
+ bl->max_current = clamp(bl->max_current, LM3533_MAX_CURRENT_MIN,
+ LM3533_MAX_CURRENT_MAX);
+
+ device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &bl->pwm);
+
+ ret = lm3533_bl_setup(bl);
+ if (ret)
+ return ret;
+
ret = devm_device_add_group(&bd->dev, &lm3533_bl_attribute_group);
if (ret < 0)
return dev_err_probe(&pdev->dev, ret,
@@ -311,10 +329,6 @@ static int lm3533_bl_probe(struct platform_device *pdev)
backlight_update_status(bd);
- ret = lm3533_bl_setup(bl, pdata);
- if (ret)
- return ret;
-
ret = lm3533_ctrlbank_enable(&bl->cb);
if (ret)
return ret;
@@ -366,10 +380,17 @@ static void lm3533_bl_shutdown(struct platform_device *pdev)
lm3533_ctrlbank_disable(&bl->cb);
}
+static const struct of_device_id lm3533_bl_match_table[] = {
+ { .compatible = "ti,lm3533-backlight" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lm3533_bl_match_table);
+
static struct platform_driver lm3533_bl_driver = {
.driver = {
.name = "lm3533-backlight",
.pm = &lm3533_bl_pm_ops,
+ .of_match_table = lm3533_bl_match_table,
},
.probe = lm3533_bl_probe,
.remove = lm3533_bl_remove,
diff --git a/include/linux/mfd/lm3533.h b/include/linux/mfd/lm3533.h
index 696014deaa7c..d3f7b07dbefc 100644
--- a/include/linux/mfd/lm3533.h
+++ b/include/linux/mfd/lm3533.h
@@ -15,6 +15,10 @@
#define LM3533_ATTR_RW(_name) \
DEVICE_ATTR(_name, S_IRUGO | S_IWUSR , show_##_name, store_##_name)
+#define LM3533_MAX_CURRENT_MIN 5000
+#define LM3533_MAX_CURRENT_MAX 29800
+#define LM3533_MAX_CURRENT_STEP 800
+
struct device;
struct gpio_desc;
struct regmap;
@@ -25,7 +29,9 @@ struct lm3533 {
struct regmap *regmap;
struct gpio_desc *hwen;
- int irq;
+
+ u32 boost_ovp;
+ u32 boost_freq;
unsigned have_als:1;
unsigned have_backlights:1;
@@ -38,50 +44,6 @@ struct lm3533_ctrlbank {
int id;
};
-struct lm3533_als_platform_data {
- unsigned pwm_mode:1; /* PWM input mode (default analog) */
- u8 r_select; /* 1 - 127 (ignored in PWM-mode) */
-};
-
-struct lm3533_bl_platform_data {
- char *name;
- u16 max_current; /* 5000 - 29800 uA (800 uA step) */
- u8 default_brightness; /* 0 - 255 */
- u8 pwm; /* 0 - 0x3f */
-};
-
-struct lm3533_led_platform_data {
- char *name;
- const char *default_trigger;
- u16 max_current; /* 5000 - 29800 uA (800 uA step) */
- u8 pwm; /* 0 - 0x3f */
-};
-
-enum lm3533_boost_freq {
- LM3533_BOOST_FREQ_500KHZ,
- LM3533_BOOST_FREQ_1000KHZ,
-};
-
-enum lm3533_boost_ovp {
- LM3533_BOOST_OVP_16V,
- LM3533_BOOST_OVP_24V,
- LM3533_BOOST_OVP_32V,
- LM3533_BOOST_OVP_40V,
-};
-
-struct lm3533_platform_data {
- enum lm3533_boost_ovp boost_ovp;
- enum lm3533_boost_freq boost_freq;
-
- struct lm3533_als_platform_data *als;
-
- struct lm3533_bl_platform_data *backlights;
- int num_backlights;
-
- struct lm3533_led_platform_data *leds;
- int num_leds;
-};
-
int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb);
int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb);
--
2.53.0
next prev parent reply other threads:[~2026-06-06 4:58 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-06 4:57 [PATCH v4 00/14] mfd: lm3533: convert to OF bindings, improve support Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 01/14] dt-bindings: leds: Document TI LM3533 LED controller Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 02/14] mfd: lm3533: Remove driver specific regmap wrappers Svyatoslav Ryhel
2026-06-06 6:53 ` Andy Shevchenko
2026-06-06 7:22 ` Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 03/14] mfd: lm3533: Remove extern from shared functions in the header Svyatoslav Ryhel
2026-06-06 6:46 ` Andy Shevchenko
2026-06-06 4:57 ` [PATCH v4 04/14] mfd: lm3533: Pass only regmap and light sensor presence to child devices Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 05/14] iio: light: lm3533-als: Remove redundant pdata helpers Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 06/14] mfd: lm3533-core: " Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 07/14] mfd: lm3533: Switch sysfs_create_group() to device_add_group() Svyatoslav Ryhel
2026-06-06 4:57 ` Svyatoslav Ryhel [this message]
2026-06-06 4:57 ` [PATCH v4 09/14] mfd: lm3533: Add support for VIN power supply Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 10/14] mfd: lm3533: Set DMA mask Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 11/14] video: backlight: lm3533_bl: Improve logic of sysfs functions Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 12/14] video: backlight: lm3533_bl: Set initial mapping mode from DT Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 13/14] video: backlight: lm3533_bl: Implement backlight_scale property Svyatoslav Ryhel
2026-06-06 4:57 ` [PATCH v4 14/14] video: leds: backlight: lm3533: Support getting LED sources from DT Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260606045738.21050-9-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=danielt@kernel.org \
--cc=deller@gmx.de \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jic23@kernel.org \
--cc=jingoohan1@gmail.com \
--cc=johan@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox