Linux Framebuffer Layer development
 help / color / mirror / Atom feed
From: Muhammad Bilal <meatuni001@gmail.com>
To: Sudip Mukherjee <sudipm.mukherjee@gmail.com>,
	Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-fbdev@vger.kernel.org, linux-staging@lists.linux.dev,
	linux-kernel@vger.kernel.org,
	Muhammad Bilal <meatuni001@gmail.com>
Subject: [PATCH v2] staging: sm750fb: fix mono image source stride mismatch in lynxfb_ops_imageblit()
Date: Sat, 18 Jul 2026 15:31:03 +0500	[thread overview]
Message-ID: <20260718103103.18082-1-meatuni001@gmail.com> (raw)

sm750_hw_imageblit() advances its monochrome source pointer by
src_delta per scanline, and computes the correct rounded-up stride
internally as:

	bytes_per_scan = (width + start_bit + 7) / 8;

Its only caller, lynxfb_ops_imageblit(), instead passed src_delta as
image->width >> 3. For widths not a multiple of 8 this under-counted
the stride, so the source pointer fell further behind the real
per-scanline layout on every line, corrupting the rendered image.

Rather than just fixing the caller's calculation, remove src_delta
as a parameter entirely and have sm750_hw_imageblit() advance by the
bytes_per_scan it already computes for itself. There has only ever
been one caller, and that caller was passing an out-of-sync
derivative of the same width/start_bit values sm750_hw_imageblit()
already has, so keeping stride as a separate parameter served no
purpose beyond letting the two calculations drift apart, which is
exactly what happened here.

Fixes: 81dee67e215b2 ("staging: sm750fb: add sm750 to staging")
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
---
 drivers/staging/sm750fb/sm750.c       | 2 +-
 drivers/staging/sm750fb/sm750.h       | 2 +-
 drivers/staging/sm750fb/sm750_accel.c | 6 ++----
 drivers/staging/sm750fb/sm750_accel.h | 4 +---
 4 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 89c811e0806c..da0b4979a281 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -261,7 +261,7 @@ static void lynxfb_ops_imageblit(struct fb_info *info,
 	spin_lock(&sm750_dev->slock);
 
 	sm750_dev->accel.de_imageblit(&sm750_dev->accel,
-				      image->data, image->width >> 3, 0,
+				      image->data, 0,
 				      base, pitch, bpp,
 				      image->dx, image->dy,
 				      image->width, image->height,
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index d2c522e67f26..83229fe155ec 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -73,7 +73,7 @@ struct lynx_accel {
 			   u32 rop2);
 
 	int (*de_imageblit)(struct lynx_accel *accel, const char *p_srcbuf,
-			    u32 src_delta, u32 start_bit, u32 d_base, u32 d_pitch,
+			    u32 start_bit, u32 d_base, u32 d_pitch,
 			    u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
 			    u32 height, u32 f_color, u32 b_color, u32 rop2);
 
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 0316ea69d009..bac9a209899c 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -288,8 +288,6 @@ static unsigned int de_get_transparency(struct lynx_accel *accel)
  * sm750_hw_imageblit
  * @accel: Acceleration device data
  * @src_buf: pointer to start of source buffer in system memory
- * @src_delta: Pitch value (in bytes) of the source buffer, +ive means top down
- *	      and -ive mean button up
  * @start_bit: Mono data can start at any bit in a byte, this value should be
  *	      0 to 7
  * @dest_base: Address of destination: offset in frame buffer
@@ -304,7 +302,7 @@ static unsigned int de_get_transparency(struct lynx_accel *accel)
  * @rop2: ROP value
  */
 int sm750_hw_imageblit(struct lynx_accel *accel, const char *src_buf,
-		       u32 src_delta, u32 start_bit, u32 dest_base, u32 dest_pitch,
+		       u32 start_bit, u32 dest_base, u32 dest_pitch,
 		       u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
 		       u32 height, u32 fg_color, u32 bg_color, u32 rop2)
 {
@@ -395,7 +393,7 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *src_buf,
 			write_dp_port(accel, *(unsigned int *)remain);
 		}
 
-		src_buf += src_delta;
+		src_buf += bytes_per_scan;
 	}
 
 	return 0;
diff --git a/drivers/staging/sm750fb/sm750_accel.h b/drivers/staging/sm750fb/sm750_accel.h
index d15a40cacb84..4f609d6af0fa 100644
--- a/drivers/staging/sm750fb/sm750_accel.h
+++ b/drivers/staging/sm750fb/sm750_accel.h
@@ -220,8 +220,6 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
 /**
  * sm750_hw_imageblit
  * @pSrcbuf: pointer to start of source buffer in system memory
- * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top down
- *>-----      and -ive mean button up
  * @startBit: Mono data can start at any bit in a byte, this value should be
  *>-----      0 to 7
  * @dBase: Address of destination: offset in frame buffer
@@ -236,7 +234,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
  * @rop2: ROP value
  */
 int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
-		       u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
+		       u32 startBit, u32 dBase, u32 dPitch,
 		       u32 bytePerPixel, u32 dx, u32 dy, u32 width,
 		       u32 height, u32 fColor, u32 bColor, u32 rop2);
 
-- 
2.55.0


             reply	other threads:[~2026-07-18 10:31 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-18 10:31 Muhammad Bilal [this message]
2026-07-18 11:57 ` [PATCH v2] staging: sm750fb: fix mono image source stride mismatch in lynxfb_ops_imageblit() Dan Carpenter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260718103103.18082-1-meatuni001@gmail.com \
    --to=meatuni001@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=sudipm.mukherjee@gmail.com \
    --cc=teddy.wang@siliconmotion.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox