RE: [PATCH V8 4/5] video: s3c-fb: Add support EXYNOS4 FIMD

[JinGoo Han <jg1.han@samsung.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="windows-1254", Size: 8342 bytes --]

Hi  Paul,

Other patches were commited to 'linux-arm-soc.git'.
Please, commit this patch '[PATCH V8 4/5] video: s3c-fb: Add support EXYNOS4 FIMD' to 'fbdev-2.6'.

Thanks,
Jingoo Han

Jingoo Han wrote:
> -----Original Message-----
> Subject: [PATCH V8 4/5] video: s3c-fb: Add support EXYNOS4 FIMD
> 
> This patch adds struct s3c_fb_driverdata s3c_fb_data_exynos4 for EXYNOS4
> and adds lcd clock gating support.
> 
> FIMD driver needs two clocks for FIMD IP and LCD pixel clock. Previously,
> both clocks are provided by using bus clock such as HCLK. However, EXYNOS4
> can not select HCLK for LCD pixel clock because the EXYNOS4 FIMD IP does
> not
> have the CLKSEL bit of VIDCON0. So, FIMD driver should provide the lcd
> clock
> using SCLK_FIMD as LCD pixel clock for EXYNOS4.
> 
> The driver selects enabling lcd clock according to has_clksel which means
> the CLKSEL bit of VIDCON0. If there is has_clksel, the driver will not
> enable the lcd clock using SCLK_FIMD because bus clock using HCLK is used
> a LCD pixel clock.
> 
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
>  drivers/video/Kconfig  |    2 +-
>  drivers/video/s3c-fb.c |   88
> +++++++++++++++++++++++++++++++++++++++++++++--
>  2 files changed, 85 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 549b960..963b8b7 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -2027,7 +2027,7 @@ config FB_TMIO_ACCELL
> 
>  config FB_S3C
>  	tristate "Samsung S3C framebuffer support"
> -	depends on FB && S3C_DEV_FB
> +	depends on FB && (S3C_DEV_FB || S5P_DEV_FIMD0)
>  	select FB_CFB_FILLRECT
>  	select FB_CFB_COPYAREA
>  	select FB_CFB_IMAGEBLIT
> diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
> index 4aecf21..cb0d3ea 100644
> --- a/drivers/video/s3c-fb.c
> +++ b/drivers/video/s3c-fb.c
> @@ -81,6 +81,7 @@ struct s3c_fb;
>   * @palette: Address of palette memory, or 0 if none.
>   * @has_prtcon: Set if has PRTCON register.
>   * @has_shadowcon: Set if has SHADOWCON register.
> + * @has_clksel: Set if VIDCON0 register has CLKSEL bit.
>   */
>  struct s3c_fb_variant {
>  	unsigned int	is_2443:1;
> @@ -98,6 +99,7 @@ struct s3c_fb_variant {
> 
>  	unsigned int	has_prtcon:1;
>  	unsigned int	has_shadowcon:1;
> +	unsigned int	has_clksel:1;
>  };
> 
>  /**
> @@ -186,6 +188,7 @@ struct s3c_fb_vsync {
>   * @dev: The device that we bound to, for printing, etc.
>   * @regs_res: The resource we claimed for the IO registers.
>   * @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
> + * @lcd_clk: The clk (sclk) feeding pixclk.
>   * @regs: The mapped hardware registers.
>   * @variant: Variant information for this hardware.
>   * @enabled: A bitmask of enabled hardware windows.
> @@ -200,6 +203,7 @@ struct s3c_fb {
>  	struct device		*dev;
>  	struct resource		*regs_res;
>  	struct clk		*bus_clk;
> +	struct clk		*lcd_clk;
>  	void __iomem		*regs;
>  	struct s3c_fb_variant	 variant;
> 
> @@ -336,10 +340,15 @@ static int s3c_fb_check_var(struct fb_var_screeninfo
> *var,
>   */
>  static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
>  {
> -	unsigned long clk = clk_get_rate(sfb->bus_clk);
> +	unsigned long clk;
>  	unsigned long long tmp;
>  	unsigned int result;
> 
> +	if (sfb->variant.has_clksel)
> +		clk = clk_get_rate(sfb->bus_clk);
> +	else
> +		clk = clk_get_rate(sfb->lcd_clk);
> +
>  	tmp = (unsigned long long)clk;
>  	tmp *= pixclk;
> 
> @@ -1354,13 +1363,24 @@ static int __devinit s3c_fb_probe(struct
> platform_device *pdev)
> 
>  	clk_enable(sfb->bus_clk);
> 
> +	if (!sfb->variant.has_clksel) {
> +		sfb->lcd_clk = clk_get(dev, "sclk_fimd");
> +		if (IS_ERR(sfb->lcd_clk)) {
> +			dev_err(dev, "failed to get lcd clock\n");
> +			ret = PTR_ERR(sfb->lcd_clk);
> +			goto err_bus_clk;
> +		}
> +
> +		clk_enable(sfb->lcd_clk);
> +	}
> +
>  	pm_runtime_enable(sfb->dev);
> 
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	if (!res) {
>  		dev_err(dev, "failed to find registers\n");
>  		ret = -ENOENT;
> -		goto err_clk;
> +		goto err_lcd_clk;
>  	}
> 
>  	sfb->regs_res = request_mem_region(res->start, resource_size(res),
> @@ -1368,7 +1388,7 @@ static int __devinit s3c_fb_probe(struct
> platform_device *pdev)
>  	if (!sfb->regs_res) {
>  		dev_err(dev, "failed to claim register region\n");
>  		ret = -ENOENT;
> -		goto err_clk;
> +		goto err_lcd_clk;
>  	}
> 
>  	sfb->regs = ioremap(res->start, resource_size(res));
> @@ -1450,7 +1470,13 @@ err_ioremap:
>  err_req_region:
>  	release_mem_region(sfb->regs_res->start, resource_size(sfb-
> >regs_res));
> 
> -err_clk:
> +err_lcd_clk:
> +	if (!sfb->variant.has_clksel) {
> +		clk_disable(sfb->lcd_clk);
> +		clk_put(sfb->lcd_clk);
> +	}
> +
> +err_bus_clk:
>  	clk_disable(sfb->bus_clk);
>  	clk_put(sfb->bus_clk);
> 
> @@ -1481,6 +1507,11 @@ static int __devexit s3c_fb_remove(struct
> platform_device *pdev)
> 
>  	iounmap(sfb->regs);
> 
> +	if (!sfb->variant.has_clksel) {
> +		clk_disable(sfb->lcd_clk);
> +		clk_put(sfb->lcd_clk);
> +	}
> +
>  	clk_disable(sfb->bus_clk);
>  	clk_put(sfb->bus_clk);
> 
> @@ -1510,6 +1541,9 @@ static int s3c_fb_suspend(struct device *dev)
>  		s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo);
>  	}
> 
> +	if (!sfb->variant.has_clksel)
> +		clk_disable(sfb->lcd_clk);
> +
>  	clk_disable(sfb->bus_clk);
>  	return 0;
>  }
> @@ -1524,6 +1558,9 @@ static int s3c_fb_resume(struct device *dev)
> 
>  	clk_enable(sfb->bus_clk);
> 
> +	if (!sfb->variant.has_clksel)
> +		clk_enable(sfb->lcd_clk);
> +
>  	/* setup gpio and output polarity controls */
>  	pd->setup_gpio();
>  	writel(pd->vidcon1, sfb->regs + VIDCON1);
> @@ -1569,6 +1606,9 @@ static int s3c_fb_runtime_suspend(struct device *dev)
>  		s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo);
>  	}
> 
> +	if (!sfb->variant.has_clksel)
> +		clk_disable(sfb->lcd_clk);
> +
>  	clk_disable(sfb->bus_clk);
>  	return 0;
>  }
> @@ -1583,6 +1623,9 @@ static int s3c_fb_runtime_resume(struct device *dev)
> 
>  	clk_enable(sfb->bus_clk);
> 
> +	if (!sfb->variant.has_clksel)
> +		clk_enable(sfb->lcd_clk);
> +
>  	/* setup gpio and output polarity controls */
>  	pd->setup_gpio();
>  	writel(pd->vidcon1, sfb->regs + VIDCON1);
> @@ -1755,6 +1798,7 @@ static struct s3c_fb_driverdata s3c_fb_data_64xx = {
>  		},
> 
>  		.has_prtcon	= 1,
> +		.has_clksel	= 1,
>  	},
>  	.win[0]	= &s3c_fb_data_64xx_wins[0],
>  	.win[1]	= &s3c_fb_data_64xx_wins[1],
> @@ -1785,6 +1829,7 @@ static struct s3c_fb_driverdata s3c_fb_data_s5pc100
> = {
>  		},
> 
>  		.has_prtcon	= 1,
> +		.has_clksel	= 1,
>  	},
>  	.win[0]	= &s3c_fb_data_s5p_wins[0],
>  	.win[1]	= &s3c_fb_data_s5p_wins[1],
> @@ -1815,6 +1860,37 @@ static struct s3c_fb_driverdata s3c_fb_data_s5pv210
> = {
>  		},
> 
>  		.has_shadowcon	= 1,
> +		.has_clksel	= 1,
> +	},
> +	.win[0]	= &s3c_fb_data_s5p_wins[0],
> +	.win[1]	= &s3c_fb_data_s5p_wins[1],
> +	.win[2]	= &s3c_fb_data_s5p_wins[2],
> +	.win[3]	= &s3c_fb_data_s5p_wins[3],
> +	.win[4]	= &s3c_fb_data_s5p_wins[4],
> +};
> +
> +static struct s3c_fb_driverdata s3c_fb_data_exynos4 = {
> +	.variant = {
> +		.nr_windows	= 5,
> +		.vidtcon	= VIDTCON0,
> +		.wincon		= WINCON(0),
> +		.winmap		= WINxMAP(0),
> +		.keycon		= WKEYCON,
> +		.osd		= VIDOSD_BASE,
> +		.osd_stride	= 16,
> +		.buf_start	= VIDW_BUF_START(0),
> +		.buf_size	= VIDW_BUF_SIZE(0),
> +		.buf_end	= VIDW_BUF_END(0),
> +
> +		.palette = {
> +			[0] = 0x2400,
> +			[1] = 0x2800,
> +			[2] = 0x2c00,
> +			[3] = 0x3000,
> +			[4] = 0x3400,
> +		},
> +
> +		.has_shadowcon	= 1,
>  	},
>  	.win[0]	= &s3c_fb_data_s5p_wins[0],
>  	.win[1]	= &s3c_fb_data_s5p_wins[1],
> @@ -1843,6 +1919,7 @@ static struct s3c_fb_driverdata s3c_fb_data_s3c2443
> = {
>  			[0] = 0x400,
>  			[1] = 0x800,
>  		},
> +		.has_clksel	= 1,
>  	},
>  	.win[0] = &(struct s3c_fb_win_variant) {
>  		.palette_sz	= 256,
> @@ -1870,6 +1947,9 @@ static struct platform_device_id s3c_fb_driver_ids[]
> = {
>  		.name		= "s5pv210-fb",
>  		.driver_data	= (unsigned long)&s3c_fb_data_s5pv210,
>  	}, {
> +		.name		= "exynos4-fb",
> +		.driver_data	= (unsigned long)&s3c_fb_data_exynos4,
> +	}, {
>  		.name		= "s3c2443-fb",
>  		.driver_data	= (unsigned long)&s3c_fb_data_s3c2443,
>  	},
> --
> 1.7.1


ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±ýöÝzÿâžØ^n‡r¡ö¦zË\x1aëh™¨è­Ú&£ûàz¿äz¹Þ—ú+€Ê+zf£¢·hšˆ§~†­†Ûiÿÿïêÿ‘êçz_è®\x0fæj:+v‰¨þ)ߣøm