From: Miles Lane <miles@megapathdsl.net>
Cc: Linux Fbdev development list <linux-fbdev-devel@lists.sourceforge.net>
Subject: Re: Rivafb not working properly in kernel 2.5.15.
Date: Sun, 12 May 2002 17:51:46 -0700 [thread overview]
Message-ID: <3CDF0E22.9020005@megapathdsl.net> (raw)
In-Reply-To: 3CDD34E4.4040803@megapathdsl.net
Hmm. I just realised may still not have given enough information.
Here is a bit more.
vendor_id
: AuthenticAMD
cpu family : 6
model
: 2
model name : AMD Athlon(tm) Processor
cpu MHz : 848.383
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate]
System Controller (rev 25)
Flags: bus master, medium devsel, latency 64
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Memory at fc9ff000 (32-bit, prefetchable) [size=4K]
I/O ports at ffe4 [disabled] [size=4]
Capabilities: <available only to root>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP
Bridge (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fca00000-feafffff
Prefetchable memory behind bridge: e4800000-f48fffff
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA
(rev 01)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE
(rev 03) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at cb00 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
Flags: medium devsel
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB
(rev 06) (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 16, IRQ 10
Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
00:0f.0 SCSI storage controller: Adaptec AHA-2930CU (rev 03)
Subsystem: Adaptec: Unknown device 3869
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at f800 [disabled] [size=256]
Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: <available only to root>
00:11.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB
Flags: bus master, medium devsel, latency 40, IRQ 11
Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:11.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB
Flags: bus master, medium devsel, latency 40, IRQ 5
Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:11.2 USB Controller: NEC Corporation: Unknown device 00e0 (rev 01)
(prog-if 20)
Subsystem: NEC Corporation: Unknown device 00e0
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at febfdf00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00:12.0 Multimedia audio controller: Creative Labs SB Live! EMU10000
(rev 07)
Subsystem: Creative Labs CT4831 SBLive! Value
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at ff80 [size=32]
Capabilities: <available only to root>
00:12.1 Input device controller: Creative Labs SB Live! (rev 07)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 64
I/O ports at fff0 [size=8]
Capabilities: <available only to root>
00:13.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink]
(rev 78)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at fc00 [size=128]
Memory at febfde80 (32-bit, non-prefetchable) [size=128]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <available only to root>
00:14.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 03)
Flags: medium devsel
Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
16-bit legacy interface ports at 0001
00:14.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 03)
Flags: medium devsel
Memory at 10001000 (32-bit, non-prefetchable) [disabled] [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=0
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
16-bit legacy interface ports at 0001
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: bandwidth@sourceforge.net
prev parent reply other threads:[~2002-05-13 0:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-11 15:12 Rivafb not working properly in kernel 2.5.15 Miles Lane
2002-05-11 15:50 ` Jeff Garzik
2002-05-12 8:02 ` Miles Lane
2002-05-12 17:34 ` Ani Joshi
2002-05-12 18:26 ` Miles Lane
2002-05-13 0:51 ` Miles Lane [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CDF0E22.9020005@megapathdsl.net \
--to=miles@megapathdsl.net \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).