From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richard Smith Subject: Rage Mobility M1 devid 4c52 Date: Thu, 15 Jan 2004 01:44:16 -0600 Sender: linux-fbdev-devel-admin@lists.sourceforge.net Message-ID: <400644D0.1060500@bitworks.com> Reply-To: rsmith@bitworks.com Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Received: from sc8-sf-mx1-b.sourceforge.net ([10.3.1.11] helo=sc8-sf-mx1.sourceforge.net) by sc8-sf-list1.sourceforge.net with esmtp (Exim 4.30) id 1Ah2Be-0001m2-Dg for linux-fbdev-devel@lists.sourceforge.net; Wed, 14 Jan 2004 23:45:06 -0800 Received: from b44.xdsl.pgtc.com ([198.70.248.44] helo=bitworks.com) by sc8-sf-mx1.sourceforge.net with smtp (Exim 4.30) id 1Ah2Be-0003My-2C for linux-fbdev-devel@lists.sourceforge.net; Wed, 14 Jan 2004 23:45:06 -0800 Received: from bitworks.com [192.168.1.22] by bitworks.com [127.0.0.1] with SMTP (MDaemon.v2.7.SP4.R) for ; Thu, 15 Jan 2004 01:42:32 -0600 Errors-To: linux-fbdev-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-fbdev-devel@lists.sourceforge.net I'm trying to run the atyfb on a board that has a ATI Rage Mobility M1 on it. Grepping the driver source yeilds some refererences to a Mobility M1 as though its supported but my device id of 0x4c52 does not show up in the table of known devices and the driver fails to detect my chip. If I copy the PCI Rage Mobililty like and change the device ID to 0x4c52 then I get atyfb messages but some of the info is wrong. For example it says I have 4M of wram but an M1 has 8M of sdram. Is the Mobility M1 really suppported? -- Richard A. Smith rsmith@bitworks.com ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html