From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Vrabel Subject: [patch] Framebuffer kbuild -- make drivers select FB_SOFTWARE_CFB_OPS (2/2) Date: Mon, 14 Feb 2005 12:46:34 +0000 Message-ID: <42109DAA.9080801@arcom.com> References: <421096C6.3030105@arcom.com> Reply-To: linux-fbdev-devel@lists.sourceforge.net Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Received: from sc8-sf-mx2-b.sourceforge.net ([10.3.1.12] helo=sc8-sf-mx2.sourceforge.net) by sc8-sf-list1.sourceforge.net with esmtp (Exim 4.30) id 1D0fci-0004zN-RB for linux-fbdev-devel@lists.sourceforge.net; Mon, 14 Feb 2005 04:46:44 -0800 Received: from webapps.arcom.com ([194.200.159.168]) by sc8-sf-mx2.sourceforge.net with esmtp (Exim 4.41) id 1D0fce-0000u5-BI for linux-fbdev-devel@lists.sourceforge.net; Mon, 14 Feb 2005 04:46:44 -0800 In-Reply-To: <421096C6.3030105@arcom.com> Sender: linux-fbdev-devel-admin@lists.sourceforge.net Errors-To: linux-fbdev-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Content-Type: text/plain; charset="us-ascii" To: linux-fbdev-devel@lists.sourceforge.net Make all framebuffer drivers (where appropriate) select FB_SOFTWARE_CFB_OPS instead of specifying the objects in the Makefile directly. Signed-off-by: David Vrabel Index: linux-2.6-i386/drivers/video/Kconfig =================================================================== --- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Kconfig 2005-02-14 11:52:54.543501963 +0000 @@ -70,6 +78,7 @@ config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) + select FB_SOFTWARE_CFB_OPS ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -85,6 +94,7 @@ config FB_PM2 tristate "Permedia2 support" depends on FB && ((AMIGA && BROKEN) || PCI) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -100,6 +110,7 @@ config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" depends on FB && ARM && ARM_AMBA + select FB_SOFTWARE_CFB_OPS help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -113,6 +124,7 @@ config FB_ACORN bool "Acorn VIDC support" depends on FB && ARM && ARCH_ACORN + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -121,10 +133,12 @@ config FB_CLPS711X bool "CLPS711X LCD support" depends on FB && ARM && ARCH_CLPS711X + select FB_SOFTWARE_CFB_OPS config FB_SA1100 bool "SA-1100 LCD support" depends on FB && ARM && ARCH_SA1100 + select FB_SOFTWARE_CFB_OPS help This is a framebuffer device for the SA-1100 LCD Controller. See for information on framebuffer @@ -136,6 +150,7 @@ config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI && (BROKEN || !SPARC64) + select FB_SOFTWARE_CFB_OPS help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -146,11 +161,13 @@ bool depends on FB && APOLLO default y + select FB_SOFTWARE_CFB_OPS config FB_Q40 bool depends on FB && Q40 default y + select FB_SOFTWARE_CFB_OPS config FB_AMIGA tristate "Amiga native chipset support" @@ -191,6 +208,7 @@ config FB_CYBER tristate "Amiga CyberVision 64 support" depends on FB && ZORRO && BROKEN + select FB_SOFTWARE_CFB_OPS help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -202,6 +220,7 @@ config FB_VIRGE bool "Amiga CyberVision 64/3D support " depends on FB && ZORRO && BROKEN + select FB_SOFTWARE_CFB_OPS help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -221,6 +240,7 @@ config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on FB && ZORRO + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). @@ -235,6 +255,7 @@ config FB_OF bool "Open Firmware frame buffer device support" depends on FB && (PPC64 || PPC_OF) + select FB_SOFTWARE_CFB_OPS help Say Y if you want support with Open Firmware for your graphics board. @@ -242,6 +263,7 @@ config FB_CONTROL bool "Apple \"control\" display support" depends on FB && PPC_PMAC + select FB_SOFTWARE_CFB_OPS help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. @@ -249,6 +271,7 @@ config FB_PLATINUM bool "Apple \"platinum\" display support" depends on FB && PPC_PMAC + select FB_SOFTWARE_CFB_OPS help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. @@ -256,6 +279,7 @@ config FB_VALKYRIE bool "Apple \"valkyrie\" display support" depends on FB && (MAC || PPC_PMAC) + select FB_SOFTWARE_CFB_OPS help This driver supports a frame buffer for the "valkyrie" graphics adapter in some Power Macintoshes. @@ -263,6 +287,7 @@ config FB_CT65550 bool "Chips 65550 display support" depends on FB && PPC + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. @@ -270,10 +295,12 @@ config FB_ASILIANT bool "Chips 69000 display support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS config FB_IMSTT bool "IMS Twin Turbo display support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. @@ -287,6 +314,7 @@ config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && (X86 || PPC) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -297,6 +325,7 @@ config FB_STI tristate "HP STI frame buffer device support" depends on FB && PARISC + select FB_SOFTWARE_CFB_OPS default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -314,16 +343,19 @@ config FB_MAC bool "Generic Macintosh display support" depends on FB && MAC + select FB_SOFTWARE_CFB_OPS # bool ' Apple DAFB display support' CONFIG_FB_DAFB config FB_HP300 bool depends on FB && HP300 + select FB_SOFTWARE_CFB_OPS default y config FB_TGA tristate "TGA framebuffer support" depends on FB && ALPHA + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. @@ -331,6 +363,7 @@ config FB_VESA bool "VESA VGA graphics support" depends on FB && (X86 || X86_64) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -345,6 +378,7 @@ config FB_HGA tristate "Hercules mono graphics support" depends on FB && X86 + select FB_SOFTWARE_CFB_OPS help Say Y here if you have a Hercules mono graphics card. @@ -370,12 +404,14 @@ config FB_SGIVW tristate "SGI Visual Workstation framebuffer support" depends on FB && X86_VISWS + select FB_SOFTWARE_CFB_OPS help SGI Visual Workstation support for framebuffer graphics. config FB_GBE bool "SGI Graphics Backend frame buffer support" depends on FB && (SGI_IP32 || X86_VISWS) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -400,6 +436,7 @@ config FB_BW2 bool "BWtwo support" depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the BWtwo frame buffer. @@ -412,6 +449,7 @@ config FB_CG6 bool "CGsix (GX,TurboGX) support" depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -419,6 +457,7 @@ config FB_PVR2 tristate "NEC PowerVR 2 display support" depends on FB && SH_DREAMCAST + select FB_SOFTWARE_CFB_OPS ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -437,6 +476,7 @@ config FB_EPSON1355 bool "Epson 1355 framebuffer support" depends on FB && (SUPERH || ARCH_CEIVA) + select FB_SOFTWARE_CFB_OPS help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a @@ -449,6 +489,7 @@ select I2C_ALGOBIT if FB_RIVA_I2C select I2C if FB_RIVA_I2C select FB_MODE_HELPERS + select FB_SOFTWARE_CFB_OPS help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -484,6 +525,7 @@ select AGP select AGP_INTEL select FB_MODE_HELPERS + select FB_SOFTWARE_CFB_OPS help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -541,6 +583,7 @@ config FB_MATROX tristate "Matrox acceleration" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS ---help--- Say Y here if you have a Matrox Millennium, Matrox Millennium II, Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox @@ -696,6 +739,7 @@ config FB_RADEON_OLD tristate "ATI Radeon display support (Old driver)" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help Choose this option if you want to use an ATI Radeon graphics card as a framebuffer device. There are both PCI and AGP versions. You @@ -743,6 +787,7 @@ config FB_ATY128 tristate "ATI Rage128 display support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help This driver supports graphics boards with the ATI Rage128 chips. Say Y if you have such a graphics board and read @@ -754,6 +799,7 @@ config FB_ATY tristate "ATI Mach64 display support" if PCI || ATARI depends on FB + select FB_SOFTWARE_CFB_OPS help This driver supports graphics boards with the ATI Mach64 chips. Say Y if you have such a graphics board. @@ -801,6 +847,7 @@ select I2C_ALGOBIT if FB_SAVAGE_I2C select I2C if FB_SAVAGE_I2C select FB_MODE_HELPERS + select FB_SOFTWARE_CFB_OPS help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -834,6 +881,7 @@ config FB_SIS tristate "SiS acceleration" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the SiS 300, 315 and 330 series VGA chipsets. Specs available at http://www.sis.com @@ -858,6 +906,7 @@ tristate "NeoMagic display support" depends on FB && PCI select FB_MODE_HELPERS + select FB_SOFTWARE_CFB_OPS help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -868,6 +917,7 @@ config FB_KYRO tristate "IMG Kyro support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -878,6 +928,7 @@ config FB_3DFX tristate "3Dfx Banshee/Voodoo3 display support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -911,6 +962,7 @@ config FB_TRIDENT tristate "Trident support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops @@ -958,6 +1010,7 @@ config FB_FFB bool "Creator/Creator3D/Elite3D support" depends on FB_SBUS && SPARC64 + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -965,6 +1018,7 @@ config FB_TCX bool "TCX (SS4/SS5 only) support" depends on FB_SBUS + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -972,6 +1026,7 @@ config FB_CG14 bool "CGfourteen (SX) support" depends on FB_SBUS + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -979,6 +1034,7 @@ config FB_P9100 bool "P9100 (Sparcbook 3 only) support" depends on FB_SBUS + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -986,6 +1042,7 @@ config FB_LEO bool "Leo (ZX) support" depends on FB_SBUS + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. @@ -997,6 +1054,7 @@ config FB_IGA bool "IGA 168x display support" depends on SPARC32 && FB_PCI + select FB_SOFTWARE_CFB_OPS help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -1004,6 +1062,7 @@ config FB_HIT tristate "HD64461 Frame Buffer support" depends on FB && HD64461 + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. @@ -1011,6 +1070,7 @@ config FB_PMAG_BA bool "PMAG-BA TURBOchannel framebuffer support" depends on FB && DECSTATION && TC + select FB_SOFTWARE_CFB_OPS help Say Y here to directly support the on-board PMAG-BA framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1019,6 +1079,7 @@ config FB_PMAGB_B bool "PMAGB-B TURBOchannel framebuffer spport" depends on FB && DECSTATION && TC + select FB_SOFTWARE_CFB_OPS help Say Y here to directly support the on-board PMAGB-B framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1027,6 +1088,7 @@ config FB_MAXINE bool "Maxine (Personal DECstation) onboard framebuffer spport" depends on FB && DECSTATION && TC + select FB_SOFTWARE_CFB_OPS help Say Y here to directly support the on-board framebuffer in the Maxine (5000/20, /25, /33) version of the DECstation. There is a @@ -1035,6 +1097,7 @@ config FB_TX3912 bool "TMPTX3912/PR31700 frame buffer support" depends on FB && NINO + select FB_SOFTWARE_CFB_OPS help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see . @@ -1044,6 +1107,7 @@ config FB_68328 bool "Motorola 68328 native frame buffer support" depends on (M68328 || M68EZ328 || M68VZ328) + select FB_SOFTWARE_CFB_OPS help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1051,6 +1115,7 @@ config FB_PXA tristate "PXA LCD framebuffer support" depends on FB && ARCH_PXA + select FB_SOFTWARE_CFB_OPS ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. @@ -1082,6 +1147,7 @@ config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" depends on FB + select FB_SOFTWARE_CFB_OPS ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics Index: linux-2.6-i386/drivers/video/Makefile =================================================================== --- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Makefile 2005-02-14 11:55:41.324139249 +0000 @@ -13,93 +13,78 @@ obj-$(CONFIG_PPC) += macmodes.o endif +obj-$(CONFIG_FB_SOFTWARE_CFB_OPS) += cfbfillrect.o cfbcopyarea.o cfbimgblt.o + # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o -obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o obj-$(CONFIG_FB_CYBER) += cyberfb.o -obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PM2) += pm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o +obj-$(CONFIG_FB_PM2) += pm2fb.o obj-$(CONFIG_FB_PM3) += pm3fb.o - -obj-$(CONFIG_FB_MATROX) += matrox/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_RIVA) += riva/ cfbimgblt.o cfbfillrect.o \ - cfbcopyarea.o vgastate.o -obj-$(CONFIG_FB_ATY) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_ATY128) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_RADEON) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_SIS) += sis/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_KYRO) += kyro/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_SAVAGE) += savage/ cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o -obj-$(CONFIG_FB_I810) += cfbcopyarea.o cfbfillrect.o cfbimgblt.o \ - vgastate.o -obj-$(CONFIG_FB_INTEL) += cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o - -obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_NEOMAGIC) += neofb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o vgastate.o +obj-$(CONFIG_FB_MATROX) += matrox/ +obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o +obj-$(CONFIG_FB_ATY) += aty/ +obj-$(CONFIG_FB_ATY128) += aty/ +obj-$(CONFIG_FB_RADEON) += aty/ +obj-$(CONFIG_FB_SIS) += sis/ +obj-$(CONFIG_FB_KYRO) += kyro/ +obj-$(CONFIG_FB_SAVAGE) += savage/ +obj-$(CONFIG_FB_I810) += vgastate.o +obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o +obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o obj-$(CONFIG_FB_VIRGE) += virgefb.o -obj-$(CONFIG_FB_3DFX) += tdfxfb.o cfbimgblt.o -ifneq ($(CONFIG_FB_3DFX_ACCEL),y) -obj-$(CONFIG_FB_3DFX) += cfbfillrect.o cfbcopyarea.o -endif -obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_CT65550) += chipsfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_IMSTT) += imsttfb.o cfbimgblt.o +obj-$(CONFIG_FB_3DFX) += tdfxfb.o +obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o +obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o +obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o +obj-$(CONFIG_FB_CT65550) += chipsfb.o +obj-$(CONFIG_FB_IMSTT) += imsttfb.o obj-$(CONFIG_FB_S3TRIO) += S3triofb.o -obj-$(CONFIG_FB_FM2) += fm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_TRIDENT) += tridentfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_STI) += stifb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_SGIVW) += sgivwfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_ACORN) += acornfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_FM2) += fm2fb.o +obj-$(CONFIG_FB_TRIDENT) += tridentfb.o +obj-$(CONFIG_FB_STI) += stifb.o +obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o +obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o +obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o +obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o +obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o +obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o +obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o +obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o +obj-$(CONFIG_FB_SGIVW) += sgivwfb.o +obj-$(CONFIG_FB_ACORN) += acornfb.o obj-$(CONFIG_FB_ATARI) += atafb.o -obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_HGA) += hgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_IGA) += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_APOLLO) += dnfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_Q40) += q40fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_TGA) += tgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_HP300) += hpfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_G364) += g364fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_SA1100) += sa1100fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o +obj-$(CONFIG_FB_HGA) += hgafb.o +obj-$(CONFIG_FB_IGA) += igafb.o +obj-$(CONFIG_FB_APOLLO) += dnfb.o +obj-$(CONFIG_FB_Q40) += q40fb.o +obj-$(CONFIG_FB_TGA) += tgafb.o +obj-$(CONFIG_FB_HP300) += hpfb.o +obj-$(CONFIG_FB_G364) += g364fb.o +obj-$(CONFIG_FB_SA1100) += sa1100fb.o obj-$(CONFIG_FB_SUN3) += sun3fb.o -obj-$(CONFIG_FB_HIT) += hitfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_TX3912) += tx3912fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PVR2) += pvr2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_MAXINE) += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VOODOO1) += sstfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_68328) += 68328fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_GBE) += gbefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PXA) += pxafb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o +obj-$(CONFIG_FB_HIT) += hitfb.o +obj-$(CONFIG_FB_TX3912) += tx3912fb.o +obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o +obj-$(CONFIG_FB_PVR2) += pvr2fb.o +obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o +obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o +obj-$(CONFIG_FB_MAXINE) += maxinefb.o +obj-$(CONFIG_FB_VOODOO1) += sstfb.o +obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +obj-$(CONFIG_FB_68328) += 68328fb.o +obj-$(CONFIG_FB_GBE) += gbefb.o +obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o +obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o +obj-$(CONFIG_FB_PXA) += pxafb.o # Platform or fallback drivers go here -obj-$(CONFIG_FB_VESA) += vesafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VGA16) += vga16fb.o cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o vgastate.o -obj-$(CONFIG_FB_OF) += offb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o +obj-$(CONFIG_FB_VESA) += vesafb.o +obj-$(CONFIG_FB_VGA16) += vga16fb.o vgastate.o +obj-$(CONFIG_FB_OF) += offb.o # the test framebuffer is last -obj-$(CONFIG_FB_VIRTUAL) += vfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_VIRTUAL) += vfb.o ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click