From: David Vrabel <dvrabel@arcom.com>
To: linux-fbdev-devel@lists.sourceforge.net
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Subject: Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/2)
Date: Mon, 14 Feb 2005 14:06:56 +0000 [thread overview]
Message-ID: <4210B080.9020302@arcom.com> (raw)
In-Reply-To: <4210AC9A.9080707@arcom.com>
[-- Attachment #1: Type: text/plain, Size: 223 bytes --]
Make all framebuffer drivers (where appropriate) select FB_CFB_FILLRECT,
FB_CFB_COPYAREA, and/or FB_CFB_IMAGEBLIT instead of specifying the
objects in the Makefile directly.
Signed-off-by: David Vrabel <dvrabel@arcom.com>
[-- Attachment #2: fb-kbuild-use-FB_CFB_xxx --]
[-- Type: text/plain, Size: 26645 bytes --]
Index: linux-2.6-i386/drivers/video/Kconfig
===================================================================
--- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-14 11:02:39.000000000 +0000
+++ linux-2.6-i386/drivers/video/Kconfig 2005-02-14 13:38:03.257815634 +0000
@@ -70,6 +94,9 @@
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
@@ -85,6 +112,9 @@
config FB_PM2
tristate "Permedia2 support"
depends on FB && ((AMIGA && BROKEN) || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
@@ -100,6 +130,9 @@
config FB_ARMCLCD
tristate "ARM PrimeCell PL110 support"
depends on FB && ARM && ARM_AMBA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This framebuffer device driver is for the ARM PrimeCell PL110
Colour LCD controller. ARM PrimeCells provide the building
@@ -113,6 +146,9 @@
config FB_ACORN
bool "Acorn VIDC support"
depends on FB && ARM && ARCH_ACORN
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Acorn VIDC graphics
hardware found in Acorn RISC PCs and other ARM-based machines. If
@@ -121,10 +157,16 @@
config FB_CLPS711X
bool "CLPS711X LCD support"
depends on FB && ARM && ARCH_CLPS711X
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
config FB_SA1100
bool "SA-1100 LCD support"
depends on FB && ARM && ARCH_SA1100
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is a framebuffer device for the SA-1100 LCD Controller.
See <http://www.linux-fbdev.org/> for information on framebuffer
@@ -136,6 +178,9 @@
config FB_CYBER2000
tristate "CyberPro 2000/2010/5000 support"
depends on FB && PCI && (BROKEN || !SPARC64)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This enables support for the Integraphics CyberPro 20x0 and 5000
VGA chips used in the Rebel.com Netwinder and other machines.
@@ -146,11 +191,16 @@
bool
depends on FB && APOLLO
default y
+ select FB_CFB_FILLRECT
+ select FB_CFB_IMAGEBLIT
config FB_Q40
bool
depends on FB && Q40
default y
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
config FB_AMIGA
tristate "Amiga native chipset support"
@@ -191,6 +241,9 @@
config FB_CYBER
tristate "Amiga CyberVision 64 support"
depends on FB && ZORRO && BROKEN
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This enables support for the Cybervision 64 graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -202,6 +255,9 @@
config FB_VIRGE
bool "Amiga CyberVision 64/3D support "
depends on FB && ZORRO && BROKEN
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This enables support for the Cybervision 64/3D graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -221,6 +277,9 @@
config FB_FM2
bool "Amiga FrameMaster II/Rainbow II support"
depends on FB && ZORRO
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Amiga FrameMaster
card from BSC (exhibited 1992 but not shipped as a CBM product).
@@ -235,6 +294,9 @@
config FB_OF
bool "Open Firmware frame buffer device support"
depends on FB && (PPC64 || PPC_OF)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y if you want support with Open Firmware for your graphics
board.
@@ -242,6 +304,9 @@
config FB_CONTROL
bool "Apple \"control\" display support"
depends on FB && PPC_PMAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports a frame buffer for the graphics adapter in the
Power Macintosh 7300 and others.
@@ -249,6 +314,9 @@
config FB_PLATINUM
bool "Apple \"platinum\" display support"
depends on FB && PPC_PMAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports a frame buffer for the "platinum" graphics
adapter in some Power Macintoshes.
@@ -256,6 +324,9 @@
config FB_VALKYRIE
bool "Apple \"valkyrie\" display support"
depends on FB && (MAC || PPC_PMAC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports a frame buffer for the "valkyrie" graphics
adapter in some Power Macintoshes.
@@ -263,6 +334,9 @@
config FB_CT65550
bool "Chips 65550 display support"
depends on FB && PPC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Chips & Technologies
65550 graphics chip in PowerBooks.
@@ -270,10 +344,14 @@
config FB_ASILIANT
bool "Chips 69000 display support"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
config FB_IMSTT
bool "IMS Twin Turbo display support"
depends on FB && PCI
+ select FB_CFB_IMAGEBLIT
help
The IMS Twin Turbo is a PCI-based frame buffer card bundled with
many Macintosh and compatible computers.
@@ -287,6 +365,9 @@
config FB_VGA16
tristate "VGA 16-color graphics support"
depends on FB && (X86 || PPC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
@@ -297,6 +378,9 @@
config FB_STI
tristate "HP STI frame buffer device support"
depends on FB && PARISC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
@@ -314,16 +398,24 @@
config FB_MAC
bool "Generic Macintosh display support"
depends on FB && MAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
# bool ' Apple DAFB display support' CONFIG_FB_DAFB
config FB_HP300
bool
depends on FB && HP300
+ select FB_CFB_FILLRECT
+ select FB_CFB_IMAGEBLIT
default y
config FB_TGA
tristate "TGA framebuffer support"
depends on FB && ALPHA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for generic TGA graphic
cards. Say Y if you have one of those.
@@ -331,6 +423,9 @@
config FB_VESA
bool "VESA VGA graphics support"
depends on FB && (X86 || X86_64)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -345,6 +440,9 @@
config FB_HGA
tristate "Hercules mono graphics support"
depends on FB && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here if you have a Hercules mono graphics card.
@@ -370,12 +468,18 @@
config FB_SGIVW
tristate "SGI Visual Workstation framebuffer support"
depends on FB && X86_VISWS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
SGI Visual Workstation support for framebuffer graphics.
config FB_GBE
bool "SGI Graphics Backend frame buffer support"
depends on FB && (SGI_IP32 || X86_VISWS)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for SGI Graphics Backend.
This chip is used in SGI O2 and Visual Workstation 320/540.
@@ -400,6 +504,9 @@
config FB_BW2
bool "BWtwo support"
depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the BWtwo frame buffer.
@@ -412,6 +519,8 @@
config FB_CG6
bool "CGsix (GX,TurboGX) support"
depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
@@ -419,6 +528,9 @@
config FB_PVR2
tristate "NEC PowerVR 2 display support"
depends on FB && SH_DREAMCAST
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
Say Y here if you have a PowerVR 2 card in your box. If you plan to
run linux on your Dreamcast, you will have to say Y here.
@@ -437,6 +549,9 @@
config FB_EPSON1355
bool "Epson 1355 framebuffer support"
depends on FB && (SUPERH || ARCH_CEIVA)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Build in support for the SED1355 Epson Research Embedded RAMDAC
LCD/CRT Controller (since redesignated as the S1D13505) as a
@@ -449,6 +564,9 @@
select I2C_ALGOBIT if FB_RIVA_I2C
select I2C if FB_RIVA_I2C
select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
@@ -484,6 +602,9 @@
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
@@ -541,6 +662,9 @@
config FB_MATROX
tristate "Matrox acceleration"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
Say Y here if you have a Matrox Millennium, Matrox Millennium II,
Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
@@ -696,6 +820,9 @@
config FB_RADEON_OLD
tristate "ATI Radeon display support (Old driver)"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Choose this option if you want to use an ATI Radeon graphics card as
a framebuffer device. There are both PCI and AGP versions. You
@@ -743,6 +870,9 @@
config FB_ATY128
tristate "ATI Rage128 display support"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports graphics boards with the ATI Rage128 chips.
Say Y if you have such a graphics board and read
@@ -754,6 +884,9 @@
config FB_ATY
tristate "ATI Mach64 display support" if PCI || ATARI
depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports graphics boards with the ATI Mach64 chips.
Say Y if you have such a graphics board.
@@ -801,6 +934,9 @@
select I2C_ALGOBIT if FB_SAVAGE_I2C
select I2C if FB_SAVAGE_I2C
select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports notebooks and computers with S3 Savage PCI/AGP
chips.
@@ -834,6 +970,9 @@
config FB_SIS
tristate "SiS acceleration"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the SiS 300, 315 and
330 series VGA chipsets. Specs available at http://www.sis.com
@@ -858,6 +997,9 @@
tristate "NeoMagic display support"
depends on FB && PCI
select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
@@ -868,6 +1010,9 @@
config FB_KYRO
tristate "IMG Kyro support"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
graphics board.
@@ -878,6 +1023,7 @@
config FB_3DFX
tristate "3Dfx Banshee/Voodoo3 display support"
depends on FB && PCI
+ select FB_CFB_IMAGEBLIT
help
This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
chips. Say Y if you have such a graphics board.
@@ -911,6 +1057,9 @@
config FB_TRIDENT
tristate "Trident support"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
This driver is supposed to support graphics boards with the
Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
@@ -947,7 +1096,7 @@
Say 'Y' here to allow you to select framebuffer drivers for
the AMD Geode family of processors.
-source "drivers/video/geode/Kconfig
+source "drivers/video/geode/Kconfig"
config FB_SBUS
bool "SBUS and UPA framebuffers"
@@ -958,6 +1107,8 @@
config FB_FFB
bool "Creator/Creator3D/Elite3D support"
depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Creator, Creator3D,
and Elite3D graphics boards.
@@ -965,6 +1116,9 @@
config FB_TCX
bool "TCX (SS4/SS5 only) support"
depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the TCX 24/8bit frame
buffer.
@@ -972,6 +1126,9 @@
config FB_CG14
bool "CGfourteen (SX) support"
depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the CGfourteen frame
buffer on Desktop SPARCsystems with the SX graphics option.
@@ -979,6 +1136,9 @@
config FB_P9100
bool "P9100 (Sparcbook 3 only) support"
depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the P9100 card
supported on Sparcbook 3 machines.
@@ -986,6 +1146,9 @@
config FB_LEO
bool "Leo (ZX) support"
depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the SBUS-based Sun ZX
(leo) frame buffer cards.
@@ -997,6 +1160,9 @@
config FB_IGA
bool "IGA 168x display support"
depends on SPARC32 && FB_PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the framebuffer device for the INTERGRAPHICS 1680 and
successor frame buffer cards.
@@ -1004,6 +1170,9 @@
config FB_HIT
tristate "HD64461 Frame Buffer support"
depends on FB && HD64461
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Hitachi HD64461 LCD
frame buffer card.
@@ -1011,6 +1180,9 @@
config FB_PMAG_BA
bool "PMAG-BA TURBOchannel framebuffer support"
depends on FB && DECSTATION && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here to directly support the on-board PMAG-BA framebuffer in
the 5000/1xx versions of the DECstation. There is a page dedicated
@@ -1019,6 +1191,9 @@
config FB_PMAGB_B
bool "PMAGB-B TURBOchannel framebuffer spport"
depends on FB && DECSTATION && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here to directly support the on-board PMAGB-B framebuffer in
the 5000/1xx versions of the DECstation. There is a page dedicated
@@ -1027,6 +1202,9 @@
config FB_MAXINE
bool "Maxine (Personal DECstation) onboard framebuffer spport"
depends on FB && DECSTATION && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here to directly support the on-board framebuffer in the
Maxine (5000/20, /25, /33) version of the DECstation. There is a
@@ -1035,6 +1213,9 @@
config FB_TX3912
bool "TMPTX3912/PR31700 frame buffer support"
depends on FB && NINO
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
@@ -1044,6 +1225,9 @@
config FB_68328
bool "Motorola 68328 native frame buffer support"
depends on (M68328 || M68EZ328 || M68VZ328)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
@@ -1051,6 +1235,9 @@
config FB_PXA
tristate "PXA LCD framebuffer support"
depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
Frame buffer driver for the built-in LCD controller in the Intel
PXA2x0 processor.
@@ -1082,6 +1269,9 @@
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics
Index: linux-2.6-i386/drivers/video/Makefile
===================================================================
--- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-14 11:02:39.000000000 +0000
+++ linux-2.6-i386/drivers/video/Makefile 2005-02-14 13:36:19.558072584 +0000
@@ -13,91 +13,74 @@
# Hardware specific drivers go first
obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o
obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o
-obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
obj-$(CONFIG_FB_CYBER) += cyberfb.o
-obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PM2) += pm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
+obj-$(CONFIG_FB_PM2) += pm2fb.o
obj-$(CONFIG_FB_PM3) += pm3fb.o
-
-obj-$(CONFIG_FB_MATROX) += matrox/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_RIVA) += riva/ cfbimgblt.o cfbfillrect.o \
- cfbcopyarea.o vgastate.o
-obj-$(CONFIG_FB_ATY) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_ATY128) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_RADEON) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_SIS) += sis/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_KYRO) += kyro/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_SAVAGE) += savage/ cfbfillrect.o cfbcopyarea.o \
- cfbimgblt.o
-obj-$(CONFIG_FB_I810) += cfbcopyarea.o cfbfillrect.o cfbimgblt.o \
- vgastate.o
-obj-$(CONFIG_FB_INTEL) += cfbfillrect.o cfbcopyarea.o \
- cfbimgblt.o
-
-obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_NEOMAGIC) += neofb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o vgastate.o
+obj-$(CONFIG_FB_MATROX) += matrox/
+obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o
+obj-$(CONFIG_FB_ATY) += aty/
+obj-$(CONFIG_FB_ATY128) += aty/
+obj-$(CONFIG_FB_RADEON) += aty/
+obj-$(CONFIG_FB_SIS) += sis/
+obj-$(CONFIG_FB_KYRO) += kyro/
+obj-$(CONFIG_FB_SAVAGE) += savage/
+obj-$(CONFIG_FB_I810) += vgastate.o
+obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o
+obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o
obj-$(CONFIG_FB_VIRGE) += virgefb.o
-obj-$(CONFIG_FB_3DFX) += tdfxfb.o cfbimgblt.o
-ifneq ($(CONFIG_FB_3DFX_ACCEL),y)
-obj-$(CONFIG_FB_3DFX) += cfbfillrect.o cfbcopyarea.o
-endif
-obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_CT65550) += chipsfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_IMSTT) += imsttfb.o cfbimgblt.o
+obj-$(CONFIG_FB_3DFX) += tdfxfb.o
+obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o
+obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o
+obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o
+obj-$(CONFIG_FB_CT65550) += chipsfb.o
+obj-$(CONFIG_FB_IMSTT) += imsttfb.o
obj-$(CONFIG_FB_S3TRIO) += S3triofb.o
-obj-$(CONFIG_FB_FM2) += fm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_TRIDENT) += tridentfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o
-obj-$(CONFIG_FB_STI) += stifb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o cfbimgblt.o cfbcopyarea.o
-obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o cfbimgblt.o cfbcopyarea.o
-obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_SGIVW) += sgivwfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_ACORN) += acornfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_FM2) += fm2fb.o
+obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
+obj-$(CONFIG_FB_STI) += stifb.o
+obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o
+obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o
+obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o
+obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o
+obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o
+obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o
+obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o
+obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o
+obj-$(CONFIG_FB_SGIVW) += sgivwfb.o
+obj-$(CONFIG_FB_ACORN) += acornfb.o
obj-$(CONFIG_FB_ATARI) += atafb.o
-obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_HGA) += hgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_IGA) += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_APOLLO) += dnfb.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_Q40) += q40fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_TGA) += tgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_HP300) += hpfb.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_G364) += g364fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_SA1100) += sa1100fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o
+obj-$(CONFIG_FB_HGA) += hgafb.o
+obj-$(CONFIG_FB_IGA) += igafb.o
+obj-$(CONFIG_FB_APOLLO) += dnfb.o
+obj-$(CONFIG_FB_Q40) += q40fb.o
+obj-$(CONFIG_FB_TGA) += tgafb.o
+obj-$(CONFIG_FB_HP300) += hpfb.o
+obj-$(CONFIG_FB_G364) += g364fb.o
+obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_SUN3) += sun3fb.o
-obj-$(CONFIG_FB_HIT) += hitfb.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_TX3912) += tx3912fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PVR2) += pvr2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_MAXINE) += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_VOODOO1) += sstfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_68328) += 68328fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_GBE) += gbefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o
-obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PXA) += pxafb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o
+obj-$(CONFIG_FB_HIT) += hitfb.o
+obj-$(CONFIG_FB_TX3912) += tx3912fb.o
+obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
+obj-$(CONFIG_FB_PVR2) += pvr2fb.o
+obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
+obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
+obj-$(CONFIG_FB_MAXINE) += maxinefb.o
+obj-$(CONFIG_FB_VOODOO1) += sstfb.o
+obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
+obj-$(CONFIG_FB_68328) += 68328fb.o
+obj-$(CONFIG_FB_GBE) += gbefb.o
+obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
+obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
+obj-$(CONFIG_FB_PXA) += pxafb.o
obj-$(CONFIG_FB_GEODE) += geode/
# Platform or fallback drivers go here
-obj-$(CONFIG_FB_VESA) += vesafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_VGA16) += vga16fb.o cfbfillrect.o cfbcopyarea.o \
- cfbimgblt.o vgastate.o
-obj-$(CONFIG_FB_OF) += offb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o
+obj-$(CONFIG_FB_VESA) += vesafb.o
+obj-$(CONFIG_FB_VGA16) += vga16fb.o vgastate.o
+obj-$(CONFIG_FB_OF) += offb.o
# the test framebuffer is last
-obj-$(CONFIG_FB_VIRTUAL) += vfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_VIRTUAL) += vfb.o
next prev parent reply other threads:[~2005-02-14 14:07 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-14 12:17 [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) David Vrabel
2005-02-14 12:23 ` Geert Uytterhoeven
2005-02-14 13:50 ` David Vrabel
2005-02-14 14:04 ` [patch] Framebuffer kbuild -- add FB_CFB_xxx options (1/2) David Vrabel
2005-02-14 14:06 ` David Vrabel [this message]
2005-02-14 14:12 ` Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/2) David Vrabel
2005-02-14 17:25 ` [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) James Simmons
2005-02-15 10:45 ` [patch] Framebuffer kbuild -- add options for building software ops (0/4) David Vrabel
2005-02-15 10:51 ` Framebuffer kbuild -- add FB_CFB_xxx options (1/4) David Vrabel
2005-02-15 10:53 ` [patch] Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/4) David Vrabel
2005-02-15 10:54 ` [patch] Framebuffer kbuild -- add FB_SOFT_CURSOR option (3/4) David Vrabel
2005-02-15 10:55 ` [patch] Framebuffer kbuild -- make all drivers select FB_SOFT_CURSOR (4/4) David Vrabel
2005-02-14 12:43 ` [patch] Framebuffer kbuild -- add FB_SOFTWARE_CFB_OPS for building cfb*.o (1/2) David Vrabel
2005-02-14 12:46 ` [patch] Framebuffer kbuild -- make drivers select FB_SOFTWARE_CFB_OPS (2/2) David Vrabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4210B080.9020302@arcom.com \
--to=dvrabel@arcom.com \
--cc=geert@linux-m68k.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).